Generic

Puch Handlebar Pad, Black/Green/White - 26cm

Puch Handlebar Pad with Black/Green/White color scheme. Dimensions:  26cm (10.2") Length54mm OD

Puch High Back Long Seat, Black - Universal

New long seat for you Puch, Motobecane, Peugeot, or......Can be made to fit many models, simply drill holes in your rear fender/frame and use M6 bolts to secure the rear.  Dimensions:...

Puch Horn / Light Switch Base w/ Clamp, Left Side - Remake

Replacement Magura style switch base. Includes metal clamp. This is for the left hand side on many old Puch mopeds. Normally pre-1977.*Remake, not original. Replaces Magura Part # 349.1.54.818...

Puch Intake for PHBG Carburetors - Raw

Puch PHBG intake manifold for Puch Maxi E50 and similar type mopeds.Allows one to use a Dellorto PHBG clamp on style carburetor.  Also will fit a Dellorto PHBG. Dimensions:19mm I.D.24mm O.D...

Puch Intake for PHBG Carburetors, Square Port - Polished

Polished (not chromed) PHBG intake manifold for Puch Maxi E50 and similar type mopeds. Polished for better flow but could still use some finishing with a rotary tool or files. Allows the use of a...

Puch Kickstart Adjustable 3 Shoe Performance Clutch

DMP brand adjustable performance kickstart clutch. Made for European kickstart Puch E50 powered mopeds.No woodruff key needed.

Puch Logo Trucker Hat - Black / White

Puch logo trucker hat. Black hat and white front with Puch logo. 

Puch Macho Round Headlight Moped Fairing - Red

Replacement Puch Headlight fairing found on the Macho, but also is good for Maxi, Tomos and many other mopeds with 5"round headlights. They will not fit the Bullet style headlights.   Replaces...

Puch Magnum 38mm Gas Cap, Chrome - No Logo

Replacement chrome gas cap. Made to fit Puch Magnum mopeds but will fit many others as well. Puch: Magnum, Monza, Free Spirit, Swinger, Pinto, Tomos: Targa...

Puch Magnum, Freespirit Center Kickstand - Black

Replacement Puch 9.5 inch center kickstand. Fits Magnum XK, MKII, Freespirit as well as some other models.This is longer than the maxi versions. Maxi is 8", Magnum is 9.5".

Puch Maxi / Newport Rear Fender - Chrome

Replacement chrome fender for Puch Maxi / Newport mopeds. Great replacement to ice out any ride or to replace a rear fender that has rusted out. Original fenders are tack welded onto the frame...

Puch Maxi / Newport Euro Headlight *Dark Grey*

Euro style headlight. This  version was normally found on Puch Maxi / Newport,  Solo, Moto Guzzi, Benelli,  Zundapps and Hercules mopeds.  Can be used with many other mopeds...

Puch Maxi Black Side Panel Set

Black side panels for the Puch Maxi, Newport and similar models. Does not fit the Maxi N rigid model, Freespirit, Murray, or Magnum. Black is classic.   Recommended Accessories: Black...

Puch Maxi Cable Guide/Cover *White*

Cable guide for Puch Maxi mopeds.Bright White.Recommended Accessories:Side Panels  

Puch Maxi Chrome Box Swingarm

Type a description for this product here...

Puch Maxi Chrome Foot Rest

Chrome plastic foot rest for the Puch Maxi.  Fits on top of frame.  Give you a place to rest your feet when not pedalling.  Or just a nice chrome frame cover. Recommended...

Puch Maxi Chrome Side Panel Set

Chrome side panels for the Puch Maxi and similar models. Does not fit the Maxi N rigid model. Recommended Accessories: Chrome Headlight Chrome Round Headlight Fairing Chrome Cable Guide...

Puch Maxi E50 Crank Oil Seal - 17 x 40 x 7

Replacement crank seal for Puch E50 powered mopeds like the Maxi, Newport, freespirit, pinto, etc. Also fits Garelli VIP crank. Includes:(x1) Crank seal 17 x 40 x 7

Puch Maxi E50 Oil Seal Set - Kickstart

Replacement 5 piece oil seal set. Made for Kickstarts but will work on pedal versions, simply will have an extra seal. Includes:(x3) Crank seals 17 x 40 x 7(x1) output shaft seal 22 x 40 x 7(x1)...

Puch Maxi Fender Hanger, 325mm - Chrome

Replacement fender hanger for Puch mopeds. Be sure to compare before purchasing. Not all models use this length. *Mounts over the axle*325mm Overall length

Puch Maxi Floorboard / Center Foot Rest White - Fits European models

This is a white center floorboard piece for Puch Maxi mopeds. This is for the European model Maxi. The American version has bars that are about 1" too wide. maybe you can get creative. 

Puch Maxi Frame Side Rails - Chrome

Replacement chrome side rails for Puch mopeds. Will not work on the Maxi N model. 

Puch Maxi Front Fender Cable Guide - black plastic

Black plastic fender guide for some Puch  mopeds. Slide your brake or speedo cable in here.  *ATTENTION: It is a little short for most models.  Heat up to make it work...

Puch Maxi Headlight Fairing Decal , Black or Blue

Puch Maxi headlight fairing decal. Blue or black. Dimensions:129mm High128MM Wide Recommended Accessories:Puch Headlight Fairings

Puch Maxi Long Seat, 3" bracket - White Logo

New long seat for you Puch maxi and Newport. Can be made to fit Pinto or Swinger models. *Puch lettering Not straight* Dimensions: (about)30mm seat post6.25" long post20" long 7"...

Puch Maxi Moped Center Kickstand - Black

Puch Maxi Kickstand. Meant only for E50 models.8" (7.7) LengthReplaces Puch# 349.5.24.500.2/30

Puch Maxi Moped Tank Decal Set - Chrome

Replacement "Puch maxi" tank decal set, one decal for each side. Could be used on any other Puch as well.Actual decal dimensions are 210mm Long by 28mm Wide.

Puch Maxi N (Rigid) Book/Luggage Rack - Chrome

Replacement book / luggage rack for Puch Maxi N (rigid) style mopeds.

Puch Maxi N (Rigid) Rear Fender, Scratch and Dent - Black

** Fender has a scuff and small dent. It will likely be unnoticeable once installed. Replacement fender for Puch Maxi N mopeds. Black

Puch Maxi Nostalgia Frame Side Decal Set

New reproduction tank decal set for Puch Maxi, Newport, nostalgia or any custom project.  Dimensions:Each sticker is about 8" long x 1" wide. 

Puch Maxi Rear Brake Plate w/ Brake Shoes - Leleu Style

Replacement brake plate and shoes for Leleu style hubs.12mm axle.80mm x 18mm brake pads.

Puch Maxi Red Side Panel Set

Red side panels for the Puch Maxi, Newport and similar models. Does not fit the Maxi N rigid model, Freespirit, Murray, or Magnum.Red is hot. Recommended Accessories:Short Mounting BoltLong Mounting...

Puch Maxi S Moped Tank Decal Set - Chrome

Puch Maxi S moped tank decal set. One for each side. Could be used on any other Puch as well.Actual decal dimensions are 205mm Long by 25mm Wide.

Puch Maxi S Pedal Crank w/ 28 Tooth Sprocket, 200mm Spindle - Chrome

Replacement pedal crank with 28 tooth sprocket. Excellent replacement for stock Puch Maxi S models with the 1 piece crank and pedal arm assemblies.If using performance exhausts or ZA50 engines, you...

Puch Maxi Side Kickstand 8.7" - Black

Side kickstand for Puch Maxi mopeds. 8.7" (220mm) stand will have it sitting just right.Black mounting clamp and black shaft.

Puch Maxi White Side Panel Set

White side panels for the Puch Maxi and similar models. Does not fit the Maxi N rigid model, Freespirit, Murray, or Magnum. Recommended Accessories: Chrome Headlight Chrome Round Headlight...

Puch Monza / Monza Seat - With Chrome Trim

High quality seat for your Puch Monza and can be made to made to  Puch Magnum as well with modifications. Dimensions : 24" long 7.5" wide in front 9" wide in rear *Again , It Does not...

Puch Moped Center Kickstand Spring

Kickstand Spring for Puch mopeds   14mm Diameter and about 116mm in total length. Please compare before purchasing.  Some claim it works on maxi, some say it does not. 

Puch Moped Seat Post - Chrome

Stock seat post for Puch Maxi with bicycle type seat post.Please be sure to compare before purchasing. Seat clamp diameter - 21.5mmSeat post diameter - 30mmOverall length - 10inches*Will not fit...

Puch Moped Single Seat * Camel Brown*

Puch stock bicycle mount type seat.  Found on most Puch Maxi and Newport models.  Can be use on other models with similar mounting style.Thick and cushy padding makes commuting and long...