Generic

Puch Maxi E50 Crank Oil Seal - 17 x 40 x 7

Replacement crank seal for Puch E50 powered mopeds like the Maxi, Newport, freespirit, pinto, etc. Also fits Garelli VIP crank. Includes:(x1) Crank seal 17 x 40 x 7

Puch Maxi E50 Oil Seal Set - Kickstart

Replacement 5 piece oil seal set. Made for Kickstarts but will work on pedal versions, simply will have an extra seal. Includes:(x3) Crank seals 17 x 40 x 7(x1) output shaft seal 22 x 40 x 7(x1)...

Puch Maxi Fender Hanger, 325mm - Chrome

Replacement fender hanger for Puch mopeds. Be sure to compare before purchasing. Not all models use this length. *Mounts over the axle*325mm Overall length

Puch Maxi Floorboard / Center Foot Rest White - Fits European models

This is a white center floorboard piece for Puch Maxi mopeds. This is for the European model Maxi. The American version has bars that are about 1" too wide. maybe you can get creative. 

Puch Maxi Frame Side Rails - Chrome

Replacement chrome side rails for Puch mopeds. Will not work on the Maxi N model. 

Puch Maxi Front Fender Cable Guide - black plastic

Black plastic fender guide for some Puch  mopeds. Slide your brake or speedo cable in here.  *ATTENTION: It is a little short for most models.  Heat up to make it work...

Puch Maxi Headlight Fairing Decal , Black or Blue

Puch Maxi headlight fairing decal. Blue or black. Dimensions:129mm High128MM Wide Recommended Accessories:Puch Headlight Fairings

Puch Maxi Long Seat, 3" bracket - White Logo

New long seat for you Puch maxi and Newport. Can be made to fit Pinto or Swinger models. *Puch lettering Not straight* Dimensions: (about)30mm seat post6.25" long post20" long 7"...

Puch Maxi Moped Center Kickstand - Black

Puch Maxi Kickstand. Meant only for E50 models.8" (7.7) LengthReplaces Puch# 349.5.24.500.2/30

Puch Maxi Moped Tank Decal Set - Chrome

Replacement "Puch maxi" tank decal set, one decal for each side. Could be used on any other Puch as well.Actual decal dimensions are 210mm Long by 28mm Wide.

Puch Maxi N (Rigid) Book/Luggage Rack - Chrome

Replacement book / luggage rack for Puch Maxi N (rigid) style mopeds.

Puch Maxi N (Rigid) Rear Fender, Scratch and Dent - Black

** Fender has a scuff and small dent. It will likely be unnoticeable once installed. Replacement fender for Puch Maxi N mopeds. Black

Puch Maxi Nostalgia Frame Side Decal Set

New reproduction tank decal set for Puch Maxi, Newport, nostalgia or any custom project.  Dimensions:Each sticker is about 8" long x 1" wide. 

Puch Maxi Rear Brake Plate w/ Brake Shoes - Leleu Style

Replacement brake plate and shoes for Leleu style hubs.12mm axle.80mm x 18mm brake pads.

Puch Maxi Red Side Panel Set

Red side panels for the Puch Maxi, Newport and similar models. Does not fit the Maxi N rigid model, Freespirit, Murray, or Magnum.Red is hot. Recommended Accessories:Short Mounting BoltLong Mounting...

Puch Maxi S Moped Tank Decal Set - Chrome

Puch Maxi S moped tank decal set. One for each side. Could be used on any other Puch as well.Actual decal dimensions are 205mm Long by 25mm Wide.

Puch Maxi S Pedal Crank w/ 28 Tooth Sprocket, 200mm Spindle - Chrome

Replacement pedal crank with 28 tooth sprocket. Excellent replacement for stock Puch Maxi S models with the 1 piece crank and pedal arm assemblies.If using performance exhausts or ZA50 engines, you...

Puch Maxi Side Kickstand 8.7" - Black

Side kickstand for Puch Maxi mopeds. 8.7" (220mm) stand will have it sitting just right.Black mounting clamp and black shaft.

Puch Maxi White Side Panel Set

White side panels for the Puch Maxi and similar models. Does not fit the Maxi N rigid model, Freespirit, Murray, or Magnum. Recommended Accessories: Chrome Headlight Chrome Round Headlight...

Puch Monza / Monza Seat - With Chrome Trim

High quality seat for your Puch Monza and can be made to made to  Puch Magnum as well with modifications. Dimensions : 24" long 7.5" wide in front 9" wide in rear *Again , It Does not...

Puch Moped Center Kickstand Spring

Kickstand Spring for Puch mopeds   14mm Diameter and about 116mm in total length. Please compare before purchasing.  Some claim it works on maxi, some say it does not. 

Puch Moped Seat Post - Chrome

Stock seat post for Puch Maxi with bicycle type seat post.Please be sure to compare before purchasing. Seat clamp diameter - 21.5mmSeat post diameter - 30mmOverall length - 10inches*Will not fit...

Puch Moped Single Seat * Camel Brown*

Puch stock bicycle mount type seat.  Found on most Puch Maxi and Newport models.  Can be use on other models with similar mounting style.Thick and cushy padding makes commuting and long...

Puch Moped Throttle Cable - Non Coated

This Puch throttle cable fits mopeds with original style controls and Bing carbs. Works on most Maxi, Pinto, Newport and Freespirit mopeds. Check your old cable for comparison when buying. cable...

Puch MS50 / MV50 Center Kickstand - Florida

Replacement center kickstand for Puch MS50 MV50 and the Puch Florida mopeds. 172mm (6.77") mount width. 254mm (10") from mount eyelet to bottom. 

Puch MS50 / MV50, Sears Allstate Top End Gasket Set 1

Top end Gasket set for MS and MV50 / Sears Allstate mopeds.  Base, head and exhaust 38mm stock size

Puch Pedal Chain Tensioner Assembly

Replaement high quality chain tensioner assembly for most Puch mopeds like the Maxi, Newport, Swinger, Pinto, Freespirit, Murray, Bombardier and others.

Puch Rear Hub for Spoke Wheels w/ Bearings and Spacer

Replacement rear hub for Leleu spoke rims. Sealed 6001RS bearings and spacer already in place!36 spoke*Not Original.Recommended Accessories:  Puch 5 star mag wheel  12mm Axle 

Puch Rear Sprocket Nuts + Bolts Set

Original style rear sprocket bolt/nut set for Puch maxi, Peugeot, Motobecane and Sachs. Others for sureIncludes (6) Nuts and Bolts.  Dimensions:24.5mm OverallM6 Threading11mm Thread length8mm...

Puch Replacement Rubber Foot Peg Set - Red

Replacement rubber foot pegs for Puch mopeds. Comes with 2 for a set.  Red

Puch Shock Mount Bolt - Maxi, Newport, Freespirit

Replacement shock bolt for Puch Maxi, Newport or Sears Freespirit. 190mm with M8 x 1.25 Threads Recommended Accessories: m8 Acorn Nuts Super Shock Set 

Puch Side Cover / Panel Bolt "Long" 45mm

Puch moped side fairing 45mm long bolt. *Sold Eachfits puch mopeds like maxi, magnum, murray, freespirit, pinto, swinger, dart, etc...M5 x 0.8mm Threads

Puch Side Cover / Panel Bolt "Short" 36.5mm - Blue

Replacement hardware to attach side covers aka panels for most puch mopeds, maxi, magnum, murry, freespirit, pinto, swinger, dart, etc. . .Use four of these and two of the long version for a complete...

Puch Side Cover / Panel Bolt 36.5mm - Grey

Replacement hardware to attach side covers aka panels for most puch mopeds, maxi, magnum, murry, freespirit, pinto, swinger, dart, etc. . .Use four of these and two of the long version for a complete...

Puch Side Cover / Panel Bolt "Longest" 46mm -Chrome

Replacement hardware to attach side covers aka panels for most Puch mopeds, maxi, murray, freespirit, pinto, swinger, dart, etc. . . Use two of these and four of the shorter version for a complete...

Puch Side Cover / Panel Bolt "Second Longest" 36.5mm -Chrome

Replacement hardware to attach side covers aka panels for most puch mopeds, maxi, murray, freespirit, pinto, swinger, dart, etc. . . Use four of these and two of the long version for a complete set...

Puch Side Cover / Panel Bolt "Shortest" 13mm - Magnum / Cobra

Replacement hardware to attach side covers for most puch mopeds, maxi, cobra, dart, magnum, pinto, murry, freespirit, swinger, etc. You must have a light touch when tightening, if you blow off the...

Puch Side Cover / Panel Bolt 45mm - Blue

Replacement hardware to attach side covers aka panels for most puch mopeds, maxi, magnum, murray, freespirit, pinto, swinger, dart, etc. . .Use two of these and four of the short version for a...

Puch Square Port Intake Gasket - thin

Intake gasket for Puch Maxi, Newport, Magnum and similar Puch engine based mopeds.   Thickness - 0.3mm

Puch Swingarm Rubber Bushing/Dampener

Replacement swingarm rubber bushing/dampener for Puch mopeds.