Hobbit, PA50, PA50II, Express, Urban Express

30mm Chrome Gas Cap, For Step Thru Mopeds

30mm chrome gas cap for many step thru mopeds including Tomos, Puch Maxi, Newport, Honda Hobbit and many more.

Fuel Petcock 12mm x 1.00mm Left Flow for Tomos, Honda, Puch and others.

Left flow petcock for LOTS of mopeds, same 12mm thread as Tomos, Honda hobbit, camino, PA50, PA50II, vespa bravo, puch swinger, puch freespirit, puch pinto, batavus hs50 and many more. fuel flows to the left - for 6mm fuel line 12mm thread

Fuel Petcock 12mm x 1.00mm, Rear Flow with Bowl

Rear flow style petcock with removable metal bowl.  This helps catches larger debris and prevents it from entering the carburetor. Perfect for Honda hobbit, camino, PA50, PA50ii and garelli VIP, katia, eureka, gulp and flex mopeds + this 12mm size...

30mm Chrome Locking Gas Cap, For Step Thru Mopeds

Locking 30mm gas cap for most step thru stye mopeds. Such as Tomos, Honda Hobbit and many others.   (Does not lock on the maxi.)    

Universal Throttle / Choke / Decomp Cable - 78"

Great universal cable that can be used on Throttles, Chokes, and decompression levers. Depending on your moped, you may need to pick up a knarp to fit on one end. Dimensions:Housing 69.5"Inner Cable 78" Long Tech Tip:  To shorten; remove the inner...

Universal LED Clear Moped Tail light

Deluxe LED taillight. Designed for Puch and Tomos Mopeds, but can be used on anything with a 12v system. Green=ground Yellow= running light Blue= brake light

NGK Spark Plug Cap for Mopeds LB05E

LB05EP 5k Resistor cover used on most mopeds and scooters. For spark plugs with terminal nuts. **No logo white logo... Now black debossed "NGK" initials. 

NGK B8HS Spark Plug

NGK spark plugs - BHS - 14mm short thread. this is the most common type of moped spark plug! numbers correspond to the temperature of the spark. 5 is the hottest and 10 is the coolest. stock mopeds will generally run a 5 or 6, kitted mopeds maybe a 7 or...

Heavy Duty 280mm Rear Shocks

Heavy duty Black and Chrome rear adjustable shocks for Tomos and many other mopeds. 280mm is standard size for Tomos, Garelli and many others.  Measure and compare for others.Adds 50lbs carrying capacity to your standard recommend load.280mm eye to...

Vespa Citta / Hobbit Sport Long Moped Seat

Vespa citta moped white long seat. says citta on the back. With some fabrication you can make it mount to other mopeds too. 19.5" long 6.5" wide about 4" tall These will fit on the Hobbit / PA50 / Camino with minor modification.

Boyesen Dual Stage Reeds, Honda Hobbit, nc50 na50 *modified*

Boyesen dual stage reeds for heavily ported 50cc up to larger 74cc engines For: Honda Hobbit PA50, PA50II, Camino, NA50, NC50, Express. Power reeds use a patented dual stage fiberglass design for more air flow, more air velocity and more...

Honda MB5, Express, NA50, NC50, Express QT50 Fuel Petcock 14mm x 1.00mm

Replacement petcock for mopeds and motorcycles. Fits Lazer, General 5 star Lazer, Honda Express, MB5,  NA50, NC50, Express and Yamaha QT50. 14 x 1.00mm Threading

Red Handle Fuel Petcock 12mm x 1.00mm

Works for Tomos, Garelli, Sears Freespirit, Murray, JC Penney Pinto, Swinger, Honda Hobbit, Sachs Columbia, Vespa Bravo and many more. If your petcock uses a 15mm wrench to unscrew than this replacement petcock is the one you need.

NGK B5HS Spark Plug

NGK B5HS Spark Plug. Sold Each   Used for many mopeds, like the Tomos, Motobecane and Puch

NGK B7HS Spark Plug

NGK Spark Plug B7HS. Sold EachWorks on mopeds like Honda, Tomos, Motobecane Puch, Sachs, and many more.

NGK B6HS Spark Plug

NGK Spark Plug B6HS. Sold EachWorks on mopeds like Honda, Tomos, Motobecane Puch, Sachs, and many more.   Tech Tips: Tighten terminal nut before use. Remove terminal nut for stud type spark plug caps NGK Heat rating of 6 is perfect for stock...

MLM Honda Hobbit PA50 VM18 Intake

This intake lets you setup a perfect mid-range ripping kit. It allows you to bolt a Mikuni 18mm carburetor to a Honda Camino Stock intake. You might want to port your stock intake a bit, but you know what you are doing! This intake features a machined...

Mikuni VM18 Clamp on Carburetor

High quality Mikuni performance in a slightly smaller size. Great carburetor for many applications. Such as the Honda Hobbit when used with the 18mm custom intake. Use the same jets as the TM series carb. Main jets available here. Comes with an installed...

CEV Bullet Headlight, Non-Sealed beam. For mopeds and cafe racers.

Limited stock!!!   NOS CEV 5" Bullet Headlight for mopeds and cafe racers of sorts.     Comes with 6v bulb. Bulb and speedometer cover sold seperately.  Recommended Accessories : Speedometer Cover Speedometer