Kinetic OEM | sku: KI-1789 Original Kinetic Non Variating Clutch Plate - TFR / Vespa Piaggio MSRP: Now: $11.21 Out of stock Ventico | sku: 1778 Vespa Piaggio Ciao 10mm x 950mm Ribbed Drive Belt for 80mm Pulley - Non Variated MSRP: Now: $18.22 Add to Cart Kinetic OEM | sku: 1777 Original Kinetic One Speed Clutch Assembly, No Bell - TFR MSRP: Now: $61.72 Out of stock SALE Kinetic OEM | sku: 1776 OEM Kinetic 95mm Rear Drive Pulley for Non-Variated Mopeds - TFR MSRP: Was: $21.04 Now: $14.01 Add to Cart Polini | sku: 1775 Polini Clutch Spring sets, 3 Tensions - Vespa & Kinetic MSRP: Now: $44.89 Out of stock Kinetic OEM | sku: 1774 Original Kinetic Clutch Pad / Weight / Bushing - TFR USA Version MSRP: Now: $5.60 Out of stock Kinetic OEM | sku: 1773 Original Kinetic One Speed Clutch Shoe Set - TFR USA Version MSRP: Now: $49.10 Add to Cart Kinetic OEM | sku: 1757 Original Kinetic Moped Pedal Crank Spindle Bushing - Each MSRP: Now: $5.60 Add to Cart Kinetic OEM | sku: 1739 Kinetic Moped Starter Weights, Shoes / Pads - Non variated, TFR MSRP: Now: $35.07 Out of stock Kinetic OEM | sku: 1687 Original Kinetic TFR Moped Single Speed Clutch - 13227680 MSRP: Now: $129.06 Out of stock SALE Adige | sku: 1686 Vespa / Kinetic Non Variating Performance Clutch by Adige MSRP: Was: $70.07 Now: $40.68 Add to Cart SALE Kinetic OEM | sku: 1667 OEM Kinetic 105mm Rear Drive Pulley for Non-Variated Mopeds - TFR MSRP: Was: $21.04 Now: $14.01 Add to Cart Kinetic OEM | sku: 1637 Kinetic Moped Starter Weights, Shoes / Pads - Magnum, Luna, Swift MSRP: Now: $35.07 Add to Cart Kinetic OEM | sku: 1641 Kinetic TFR Magnum RIGHT Pedal Crank Arm, 20mm - Chrome MSRP: Now: $28.04 Add to Cart Kinetic OEM | sku: 1636 Kinetic TFR Magnum LEFT Pedal Crank Arm, 20mm - Chrome MSRP: Now: $28.04 Add to Cart CIF | sku: 745 CIF Clutch Set for Vespa / Kinetic Non-Variated Mopeds MSRP: Now: $49.03 Add to Cart DR Racing | sku: 492 Vespa Non-Variated Clutch Weight Set with springs. DR Racing MSRP: Now: $39.28 Add to Cart Kinetic OEM | sku: KI-1789 Original Kinetic Non Variating Clutch Plate - TFR / Vespa Piaggio Original Kinetic Clutch plate for non variating mopeds. Will also fit Vespa Piaggio non variating mopeds. Intended for the old style Luna / TFR mopeds with > This Style Clutch < and > Shoes <*Be sure to compare before purchasing. Kinetic #... MSRP: Now: $11.21 Out of stock Ventico | sku: 1778 Vespa Piaggio Ciao 10mm x 950mm Ribbed Drive Belt for 80mm Pulley - Non Variated Ventico 10mm x 950mm drive belt for non variated Vespa Piaggio Ciao mopeds and some model TFR mopeds. For use on 80mm Pulleys.*May fit 95mm pulley but it will be a very tight fit. 10mm W x 8mm H x 950mm L MSRP: Now: $18.22 Add to Cart Kinetic OEM | sku: 1777 Original Kinetic One Speed Clutch Assembly, No Bell - TFR Original non variating Kinetic clutch assembly for single speed TFR / luna mopeds. Includes clutch plate, shoes, and springs. The clutch plate is D shaped on one side and circular on the other just like non variating Vespa Piaggio mopeds. *Be... MSRP: Now: $61.72 Out of stock SALE Kinetic OEM | sku: 1776 OEM Kinetic 95mm Rear Drive Pulley for Non-Variated Mopeds - TFR New original 95mm Rear drive pulley for non variated Kinetic models like the TFR, Luna etc. This is the smooth round 11mm hole with a Woodruff keyway version.Black. Please be sure to compare before purchasing. MSRP: Was: $21.04 Now: $14.01 Add to Cart Polini | sku: 1775 Polini Clutch Spring sets, 3 Tensions - Vespa & Kinetic New Polini clutch springs for non variated Vespa Piaggio mopeds and non variated TFR mopeds. (3)metal = stiff, (3)green = stiffer, (3)blue = Stiffest. *You must compare before purchasing, these can only be used for Vespa Piaggio mopeds or the... MSRP: Now: $44.89 Out of stock Kinetic OEM | sku: 1774 Original Kinetic Clutch Pad / Weight / Bushing - TFR USA Version New original Kinetic one speed TFR USA / Luna Double / Plus Super clutch pad / weight / bushing. This slides over the pins on your kinetic # 13304360 support plate. Works with > SKU 1687 complete clutch <*You only receive one. Specifications:10... MSRP: Now: $5.60 Out of stock Kinetic OEM | sku: 1773 Original Kinetic One Speed Clutch Shoe Set - TFR USA Version new OEM Kinetic Clutch shoe set (3 pads / shoes). These are for the TFR USA or Luna Double plus / Super version mopeds. *You must compare before purchasing, the older(1990s) TFR mopeds used the > Vespa style pads. <Kinetic # 13229270 and 06029600 MSRP: Now: $49.10 Add to Cart Kinetic OEM | sku: 1757 Original Kinetic Moped Pedal Crank Spindle Bushing - Each OEM Kinetic metal pedal crank arm bushing for the larger pedal cranks arms found on the TFR, Magnum and Luna. Does not fit the 16mm TFR USA type. You need one for each side of the pedal crank. Dimensions:20mm Inner Diameter26mm Outer Diameter31mm... MSRP: Now: $5.60 Add to Cart Kinetic OEM | sku: 1739 Kinetic Moped Starter Weights, Shoes / Pads - Non variated, TFR Original starter weights for Non-variated TFR Kinetic mopeds. *Be sure to compare before purchasing. Kinetic Part #03029450 Upgraded version available > here <Recommended Accessories:Starter Clutch SpringStarter Weight Retainer MSRP: Now: $35.07 Out of stock Kinetic OEM | sku: 1687 Original Kinetic TFR Moped Single Speed Clutch - 13227680 Original Kinetic TFR moped single speed clutch. Please please please compare before purchasing or send in pictures of your moped if not sure this is for you. May also fit the Piaggio Vespa Ciao.Single speeds only, not Variated models. Includes what... MSRP: Now: $129.06 Out of stock SALE Adige | sku: 1686 Vespa / Kinetic Non Variating Performance Clutch by Adige Italian made Adige performance clutch innards for Single speed non-variating version models. Fits inside the stock clutch bell. *Best for tuning projects up to 43mm cylinder size. Try it out, let us know. Fits: Single Speed -... MSRP: Was: $70.07 Now: $40.68 Add to Cart SALE Kinetic OEM | sku: 1667 OEM Kinetic 105mm Rear Drive Pulley for Non-Variated Mopeds - TFR New original 105mm Rear drive pulley for non variated Kinetic models like the TFR, Luna etc. This is the smooth round 11mm hole with a Woodruff keyway version.Grey. Please be sure to compare before purchasing. MSRP: Was: $21.04 Now: $14.01 Add to Cart Kinetic OEM | sku: 1637 Kinetic Moped Starter Weights, Shoes / Pads - Magnum, Luna, Swift Original starter weights for Kinetic mopeds. Installation is based upon the moped. one way for Magnum models, the other for Luna Swift models. No springs, no rubber pads. Kinetic Part # #05029590 Recommended Accessories:Starter Clutch Spring MSRP: Now: $35.07 Add to Cart Kinetic OEM | sku: 1641 Kinetic TFR Magnum RIGHT Pedal Crank Arm, 20mm - Chrome New RIGHT hand side chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though... MSRP: Now: $28.04 Add to Cart Kinetic OEM | sku: 1636 Kinetic TFR Magnum LEFT Pedal Crank Arm, 20mm - Chrome New LEFT chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though some newer... MSRP: Now: $28.04 Add to Cart CIF | sku: 745 CIF Clutch Set for Vespa / Kinetic Non-Variated Mopeds CIF repalcement 3 Piece Clutch Weight, spring and plate set. Made in Italy CIF Part # 5570K Fits: Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, SI Kinetic TFR and similar MSRP: Now: $49.03 Add to Cart DR Racing | sku: 492 Vespa Non-Variated Clutch Weight Set with springs. DR Racing Top quality DR Racing replacement 3 Piece Clutch Weight Set and Reinforced springs for additional acceleration performance, Fits: Non-Variated Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, Gillera, Cita, SI Kinetic TFR (not tfr usa) and... MSRP: Now: $39.28 Add to Cart Previous 1 2 Previous 1 2 Compare Selected × OK
Ventico | sku: 1778 Vespa Piaggio Ciao 10mm x 950mm Ribbed Drive Belt for 80mm Pulley - Non Variated MSRP: Now: $18.22 Add to Cart Kinetic OEM | sku: 1777 Original Kinetic One Speed Clutch Assembly, No Bell - TFR MSRP: Now: $61.72 Out of stock SALE Kinetic OEM | sku: 1776 OEM Kinetic 95mm Rear Drive Pulley for Non-Variated Mopeds - TFR MSRP: Was: $21.04 Now: $14.01 Add to Cart Polini | sku: 1775 Polini Clutch Spring sets, 3 Tensions - Vespa & Kinetic MSRP: Now: $44.89 Out of stock Kinetic OEM | sku: 1774 Original Kinetic Clutch Pad / Weight / Bushing - TFR USA Version MSRP: Now: $5.60 Out of stock Kinetic OEM | sku: 1773 Original Kinetic One Speed Clutch Shoe Set - TFR USA Version MSRP: Now: $49.10 Add to Cart Kinetic OEM | sku: 1757 Original Kinetic Moped Pedal Crank Spindle Bushing - Each MSRP: Now: $5.60 Add to Cart Kinetic OEM | sku: 1739 Kinetic Moped Starter Weights, Shoes / Pads - Non variated, TFR MSRP: Now: $35.07 Out of stock Kinetic OEM | sku: 1687 Original Kinetic TFR Moped Single Speed Clutch - 13227680 MSRP: Now: $129.06 Out of stock SALE Adige | sku: 1686 Vespa / Kinetic Non Variating Performance Clutch by Adige MSRP: Was: $70.07 Now: $40.68 Add to Cart SALE Kinetic OEM | sku: 1667 OEM Kinetic 105mm Rear Drive Pulley for Non-Variated Mopeds - TFR MSRP: Was: $21.04 Now: $14.01 Add to Cart Kinetic OEM | sku: 1637 Kinetic Moped Starter Weights, Shoes / Pads - Magnum, Luna, Swift MSRP: Now: $35.07 Add to Cart Kinetic OEM | sku: 1641 Kinetic TFR Magnum RIGHT Pedal Crank Arm, 20mm - Chrome MSRP: Now: $28.04 Add to Cart Kinetic OEM | sku: 1636 Kinetic TFR Magnum LEFT Pedal Crank Arm, 20mm - Chrome MSRP: Now: $28.04 Add to Cart CIF | sku: 745 CIF Clutch Set for Vespa / Kinetic Non-Variated Mopeds MSRP: Now: $49.03 Add to Cart DR Racing | sku: 492 Vespa Non-Variated Clutch Weight Set with springs. DR Racing MSRP: Now: $39.28 Add to Cart Kinetic OEM | sku: KI-1789 Original Kinetic Non Variating Clutch Plate - TFR / Vespa Piaggio Original Kinetic Clutch plate for non variating mopeds. Will also fit Vespa Piaggio non variating mopeds. Intended for the old style Luna / TFR mopeds with > This Style Clutch < and > Shoes <*Be sure to compare before purchasing. Kinetic #... MSRP: Now: $11.21 Out of stock Ventico | sku: 1778 Vespa Piaggio Ciao 10mm x 950mm Ribbed Drive Belt for 80mm Pulley - Non Variated Ventico 10mm x 950mm drive belt for non variated Vespa Piaggio Ciao mopeds and some model TFR mopeds. For use on 80mm Pulleys.*May fit 95mm pulley but it will be a very tight fit. 10mm W x 8mm H x 950mm L MSRP: Now: $18.22 Add to Cart Kinetic OEM | sku: 1777 Original Kinetic One Speed Clutch Assembly, No Bell - TFR Original non variating Kinetic clutch assembly for single speed TFR / luna mopeds. Includes clutch plate, shoes, and springs. The clutch plate is D shaped on one side and circular on the other just like non variating Vespa Piaggio mopeds. *Be... MSRP: Now: $61.72 Out of stock SALE Kinetic OEM | sku: 1776 OEM Kinetic 95mm Rear Drive Pulley for Non-Variated Mopeds - TFR New original 95mm Rear drive pulley for non variated Kinetic models like the TFR, Luna etc. This is the smooth round 11mm hole with a Woodruff keyway version.Black. Please be sure to compare before purchasing. MSRP: Was: $21.04 Now: $14.01 Add to Cart Polini | sku: 1775 Polini Clutch Spring sets, 3 Tensions - Vespa & Kinetic New Polini clutch springs for non variated Vespa Piaggio mopeds and non variated TFR mopeds. (3)metal = stiff, (3)green = stiffer, (3)blue = Stiffest. *You must compare before purchasing, these can only be used for Vespa Piaggio mopeds or the... MSRP: Now: $44.89 Out of stock Kinetic OEM | sku: 1774 Original Kinetic Clutch Pad / Weight / Bushing - TFR USA Version New original Kinetic one speed TFR USA / Luna Double / Plus Super clutch pad / weight / bushing. This slides over the pins on your kinetic # 13304360 support plate. Works with > SKU 1687 complete clutch <*You only receive one. Specifications:10... MSRP: Now: $5.60 Out of stock Kinetic OEM | sku: 1773 Original Kinetic One Speed Clutch Shoe Set - TFR USA Version new OEM Kinetic Clutch shoe set (3 pads / shoes). These are for the TFR USA or Luna Double plus / Super version mopeds. *You must compare before purchasing, the older(1990s) TFR mopeds used the > Vespa style pads. <Kinetic # 13229270 and 06029600 MSRP: Now: $49.10 Add to Cart Kinetic OEM | sku: 1757 Original Kinetic Moped Pedal Crank Spindle Bushing - Each OEM Kinetic metal pedal crank arm bushing for the larger pedal cranks arms found on the TFR, Magnum and Luna. Does not fit the 16mm TFR USA type. You need one for each side of the pedal crank. Dimensions:20mm Inner Diameter26mm Outer Diameter31mm... MSRP: Now: $5.60 Add to Cart Kinetic OEM | sku: 1739 Kinetic Moped Starter Weights, Shoes / Pads - Non variated, TFR Original starter weights for Non-variated TFR Kinetic mopeds. *Be sure to compare before purchasing. Kinetic Part #03029450 Upgraded version available > here <Recommended Accessories:Starter Clutch SpringStarter Weight Retainer MSRP: Now: $35.07 Out of stock Kinetic OEM | sku: 1687 Original Kinetic TFR Moped Single Speed Clutch - 13227680 Original Kinetic TFR moped single speed clutch. Please please please compare before purchasing or send in pictures of your moped if not sure this is for you. May also fit the Piaggio Vespa Ciao.Single speeds only, not Variated models. Includes what... MSRP: Now: $129.06 Out of stock SALE Adige | sku: 1686 Vespa / Kinetic Non Variating Performance Clutch by Adige Italian made Adige performance clutch innards for Single speed non-variating version models. Fits inside the stock clutch bell. *Best for tuning projects up to 43mm cylinder size. Try it out, let us know. Fits: Single Speed -... MSRP: Was: $70.07 Now: $40.68 Add to Cart SALE Kinetic OEM | sku: 1667 OEM Kinetic 105mm Rear Drive Pulley for Non-Variated Mopeds - TFR New original 105mm Rear drive pulley for non variated Kinetic models like the TFR, Luna etc. This is the smooth round 11mm hole with a Woodruff keyway version.Grey. Please be sure to compare before purchasing. MSRP: Was: $21.04 Now: $14.01 Add to Cart Kinetic OEM | sku: 1637 Kinetic Moped Starter Weights, Shoes / Pads - Magnum, Luna, Swift Original starter weights for Kinetic mopeds. Installation is based upon the moped. one way for Magnum models, the other for Luna Swift models. No springs, no rubber pads. Kinetic Part # #05029590 Recommended Accessories:Starter Clutch Spring MSRP: Now: $35.07 Add to Cart Kinetic OEM | sku: 1641 Kinetic TFR Magnum RIGHT Pedal Crank Arm, 20mm - Chrome New RIGHT hand side chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though... MSRP: Now: $28.04 Add to Cart Kinetic OEM | sku: 1636 Kinetic TFR Magnum LEFT Pedal Crank Arm, 20mm - Chrome New LEFT chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though some newer... MSRP: Now: $28.04 Add to Cart CIF | sku: 745 CIF Clutch Set for Vespa / Kinetic Non-Variated Mopeds CIF repalcement 3 Piece Clutch Weight, spring and plate set. Made in Italy CIF Part # 5570K Fits: Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, SI Kinetic TFR and similar MSRP: Now: $49.03 Add to Cart DR Racing | sku: 492 Vespa Non-Variated Clutch Weight Set with springs. DR Racing Top quality DR Racing replacement 3 Piece Clutch Weight Set and Reinforced springs for additional acceleration performance, Fits: Non-Variated Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, Gillera, Cita, SI Kinetic TFR (not tfr usa) and... MSRP: Now: $39.28 Add to Cart Previous 1 2 Previous 1 2 Compare Selected × OK
Kinetic OEM | sku: 1777 Original Kinetic One Speed Clutch Assembly, No Bell - TFR MSRP: Now: $61.72 Out of stock SALE Kinetic OEM | sku: 1776 OEM Kinetic 95mm Rear Drive Pulley for Non-Variated Mopeds - TFR MSRP: Was: $21.04 Now: $14.01 Add to Cart Polini | sku: 1775 Polini Clutch Spring sets, 3 Tensions - Vespa & Kinetic MSRP: Now: $44.89 Out of stock Kinetic OEM | sku: 1774 Original Kinetic Clutch Pad / Weight / Bushing - TFR USA Version MSRP: Now: $5.60 Out of stock Kinetic OEM | sku: 1773 Original Kinetic One Speed Clutch Shoe Set - TFR USA Version MSRP: Now: $49.10 Add to Cart Kinetic OEM | sku: 1757 Original Kinetic Moped Pedal Crank Spindle Bushing - Each MSRP: Now: $5.60 Add to Cart Kinetic OEM | sku: 1739 Kinetic Moped Starter Weights, Shoes / Pads - Non variated, TFR MSRP: Now: $35.07 Out of stock Kinetic OEM | sku: 1687 Original Kinetic TFR Moped Single Speed Clutch - 13227680 MSRP: Now: $129.06 Out of stock SALE Adige | sku: 1686 Vespa / Kinetic Non Variating Performance Clutch by Adige MSRP: Was: $70.07 Now: $40.68 Add to Cart SALE Kinetic OEM | sku: 1667 OEM Kinetic 105mm Rear Drive Pulley for Non-Variated Mopeds - TFR MSRP: Was: $21.04 Now: $14.01 Add to Cart Kinetic OEM | sku: 1637 Kinetic Moped Starter Weights, Shoes / Pads - Magnum, Luna, Swift MSRP: Now: $35.07 Add to Cart Kinetic OEM | sku: 1641 Kinetic TFR Magnum RIGHT Pedal Crank Arm, 20mm - Chrome MSRP: Now: $28.04 Add to Cart Kinetic OEM | sku: 1636 Kinetic TFR Magnum LEFT Pedal Crank Arm, 20mm - Chrome MSRP: Now: $28.04 Add to Cart CIF | sku: 745 CIF Clutch Set for Vespa / Kinetic Non-Variated Mopeds MSRP: Now: $49.03 Add to Cart DR Racing | sku: 492 Vespa Non-Variated Clutch Weight Set with springs. DR Racing MSRP: Now: $39.28 Add to Cart Kinetic OEM | sku: KI-1789 Original Kinetic Non Variating Clutch Plate - TFR / Vespa Piaggio Original Kinetic Clutch plate for non variating mopeds. Will also fit Vespa Piaggio non variating mopeds. Intended for the old style Luna / TFR mopeds with > This Style Clutch < and > Shoes <*Be sure to compare before purchasing. Kinetic #... MSRP: Now: $11.21 Out of stock Ventico | sku: 1778 Vespa Piaggio Ciao 10mm x 950mm Ribbed Drive Belt for 80mm Pulley - Non Variated Ventico 10mm x 950mm drive belt for non variated Vespa Piaggio Ciao mopeds and some model TFR mopeds. For use on 80mm Pulleys.*May fit 95mm pulley but it will be a very tight fit. 10mm W x 8mm H x 950mm L MSRP: Now: $18.22 Add to Cart Kinetic OEM | sku: 1777 Original Kinetic One Speed Clutch Assembly, No Bell - TFR Original non variating Kinetic clutch assembly for single speed TFR / luna mopeds. Includes clutch plate, shoes, and springs. The clutch plate is D shaped on one side and circular on the other just like non variating Vespa Piaggio mopeds. *Be... MSRP: Now: $61.72 Out of stock SALE Kinetic OEM | sku: 1776 OEM Kinetic 95mm Rear Drive Pulley for Non-Variated Mopeds - TFR New original 95mm Rear drive pulley for non variated Kinetic models like the TFR, Luna etc. This is the smooth round 11mm hole with a Woodruff keyway version.Black. Please be sure to compare before purchasing. MSRP: Was: $21.04 Now: $14.01 Add to Cart Polini | sku: 1775 Polini Clutch Spring sets, 3 Tensions - Vespa & Kinetic New Polini clutch springs for non variated Vespa Piaggio mopeds and non variated TFR mopeds. (3)metal = stiff, (3)green = stiffer, (3)blue = Stiffest. *You must compare before purchasing, these can only be used for Vespa Piaggio mopeds or the... MSRP: Now: $44.89 Out of stock Kinetic OEM | sku: 1774 Original Kinetic Clutch Pad / Weight / Bushing - TFR USA Version New original Kinetic one speed TFR USA / Luna Double / Plus Super clutch pad / weight / bushing. This slides over the pins on your kinetic # 13304360 support plate. Works with > SKU 1687 complete clutch <*You only receive one. Specifications:10... MSRP: Now: $5.60 Out of stock Kinetic OEM | sku: 1773 Original Kinetic One Speed Clutch Shoe Set - TFR USA Version new OEM Kinetic Clutch shoe set (3 pads / shoes). These are for the TFR USA or Luna Double plus / Super version mopeds. *You must compare before purchasing, the older(1990s) TFR mopeds used the > Vespa style pads. <Kinetic # 13229270 and 06029600 MSRP: Now: $49.10 Add to Cart Kinetic OEM | sku: 1757 Original Kinetic Moped Pedal Crank Spindle Bushing - Each OEM Kinetic metal pedal crank arm bushing for the larger pedal cranks arms found on the TFR, Magnum and Luna. Does not fit the 16mm TFR USA type. You need one for each side of the pedal crank. Dimensions:20mm Inner Diameter26mm Outer Diameter31mm... MSRP: Now: $5.60 Add to Cart Kinetic OEM | sku: 1739 Kinetic Moped Starter Weights, Shoes / Pads - Non variated, TFR Original starter weights for Non-variated TFR Kinetic mopeds. *Be sure to compare before purchasing. Kinetic Part #03029450 Upgraded version available > here <Recommended Accessories:Starter Clutch SpringStarter Weight Retainer MSRP: Now: $35.07 Out of stock Kinetic OEM | sku: 1687 Original Kinetic TFR Moped Single Speed Clutch - 13227680 Original Kinetic TFR moped single speed clutch. Please please please compare before purchasing or send in pictures of your moped if not sure this is for you. May also fit the Piaggio Vespa Ciao.Single speeds only, not Variated models. Includes what... MSRP: Now: $129.06 Out of stock SALE Adige | sku: 1686 Vespa / Kinetic Non Variating Performance Clutch by Adige Italian made Adige performance clutch innards for Single speed non-variating version models. Fits inside the stock clutch bell. *Best for tuning projects up to 43mm cylinder size. Try it out, let us know. Fits: Single Speed -... MSRP: Was: $70.07 Now: $40.68 Add to Cart SALE Kinetic OEM | sku: 1667 OEM Kinetic 105mm Rear Drive Pulley for Non-Variated Mopeds - TFR New original 105mm Rear drive pulley for non variated Kinetic models like the TFR, Luna etc. This is the smooth round 11mm hole with a Woodruff keyway version.Grey. Please be sure to compare before purchasing. MSRP: Was: $21.04 Now: $14.01 Add to Cart Kinetic OEM | sku: 1637 Kinetic Moped Starter Weights, Shoes / Pads - Magnum, Luna, Swift Original starter weights for Kinetic mopeds. Installation is based upon the moped. one way for Magnum models, the other for Luna Swift models. No springs, no rubber pads. Kinetic Part # #05029590 Recommended Accessories:Starter Clutch Spring MSRP: Now: $35.07 Add to Cart Kinetic OEM | sku: 1641 Kinetic TFR Magnum RIGHT Pedal Crank Arm, 20mm - Chrome New RIGHT hand side chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though... MSRP: Now: $28.04 Add to Cart Kinetic OEM | sku: 1636 Kinetic TFR Magnum LEFT Pedal Crank Arm, 20mm - Chrome New LEFT chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though some newer... MSRP: Now: $28.04 Add to Cart CIF | sku: 745 CIF Clutch Set for Vespa / Kinetic Non-Variated Mopeds CIF repalcement 3 Piece Clutch Weight, spring and plate set. Made in Italy CIF Part # 5570K Fits: Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, SI Kinetic TFR and similar MSRP: Now: $49.03 Add to Cart DR Racing | sku: 492 Vespa Non-Variated Clutch Weight Set with springs. DR Racing Top quality DR Racing replacement 3 Piece Clutch Weight Set and Reinforced springs for additional acceleration performance, Fits: Non-Variated Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, Gillera, Cita, SI Kinetic TFR (not tfr usa) and... MSRP: Now: $39.28 Add to Cart Previous 1 2 Previous 1 2 Compare Selected × OK
SALE Kinetic OEM | sku: 1776 OEM Kinetic 95mm Rear Drive Pulley for Non-Variated Mopeds - TFR MSRP: Was: $21.04 Now: $14.01 Add to Cart
Polini | sku: 1775 Polini Clutch Spring sets, 3 Tensions - Vespa & Kinetic MSRP: Now: $44.89 Out of stock Kinetic OEM | sku: 1774 Original Kinetic Clutch Pad / Weight / Bushing - TFR USA Version MSRP: Now: $5.60 Out of stock Kinetic OEM | sku: 1773 Original Kinetic One Speed Clutch Shoe Set - TFR USA Version MSRP: Now: $49.10 Add to Cart Kinetic OEM | sku: 1757 Original Kinetic Moped Pedal Crank Spindle Bushing - Each MSRP: Now: $5.60 Add to Cart Kinetic OEM | sku: 1739 Kinetic Moped Starter Weights, Shoes / Pads - Non variated, TFR MSRP: Now: $35.07 Out of stock Kinetic OEM | sku: 1687 Original Kinetic TFR Moped Single Speed Clutch - 13227680 MSRP: Now: $129.06 Out of stock SALE Adige | sku: 1686 Vespa / Kinetic Non Variating Performance Clutch by Adige MSRP: Was: $70.07 Now: $40.68 Add to Cart SALE Kinetic OEM | sku: 1667 OEM Kinetic 105mm Rear Drive Pulley for Non-Variated Mopeds - TFR MSRP: Was: $21.04 Now: $14.01 Add to Cart Kinetic OEM | sku: 1637 Kinetic Moped Starter Weights, Shoes / Pads - Magnum, Luna, Swift MSRP: Now: $35.07 Add to Cart Kinetic OEM | sku: 1641 Kinetic TFR Magnum RIGHT Pedal Crank Arm, 20mm - Chrome MSRP: Now: $28.04 Add to Cart Kinetic OEM | sku: 1636 Kinetic TFR Magnum LEFT Pedal Crank Arm, 20mm - Chrome MSRP: Now: $28.04 Add to Cart CIF | sku: 745 CIF Clutch Set for Vespa / Kinetic Non-Variated Mopeds MSRP: Now: $49.03 Add to Cart DR Racing | sku: 492 Vespa Non-Variated Clutch Weight Set with springs. DR Racing MSRP: Now: $39.28 Add to Cart Kinetic OEM | sku: KI-1789 Original Kinetic Non Variating Clutch Plate - TFR / Vespa Piaggio Original Kinetic Clutch plate for non variating mopeds. Will also fit Vespa Piaggio non variating mopeds. Intended for the old style Luna / TFR mopeds with > This Style Clutch < and > Shoes <*Be sure to compare before purchasing. Kinetic #... MSRP: Now: $11.21 Out of stock Ventico | sku: 1778 Vespa Piaggio Ciao 10mm x 950mm Ribbed Drive Belt for 80mm Pulley - Non Variated Ventico 10mm x 950mm drive belt for non variated Vespa Piaggio Ciao mopeds and some model TFR mopeds. For use on 80mm Pulleys.*May fit 95mm pulley but it will be a very tight fit. 10mm W x 8mm H x 950mm L MSRP: Now: $18.22 Add to Cart Kinetic OEM | sku: 1777 Original Kinetic One Speed Clutch Assembly, No Bell - TFR Original non variating Kinetic clutch assembly for single speed TFR / luna mopeds. Includes clutch plate, shoes, and springs. The clutch plate is D shaped on one side and circular on the other just like non variating Vespa Piaggio mopeds. *Be... MSRP: Now: $61.72 Out of stock SALE Kinetic OEM | sku: 1776 OEM Kinetic 95mm Rear Drive Pulley for Non-Variated Mopeds - TFR New original 95mm Rear drive pulley for non variated Kinetic models like the TFR, Luna etc. This is the smooth round 11mm hole with a Woodruff keyway version.Black. Please be sure to compare before purchasing. MSRP: Was: $21.04 Now: $14.01 Add to Cart Polini | sku: 1775 Polini Clutch Spring sets, 3 Tensions - Vespa & Kinetic New Polini clutch springs for non variated Vespa Piaggio mopeds and non variated TFR mopeds. (3)metal = stiff, (3)green = stiffer, (3)blue = Stiffest. *You must compare before purchasing, these can only be used for Vespa Piaggio mopeds or the... MSRP: Now: $44.89 Out of stock Kinetic OEM | sku: 1774 Original Kinetic Clutch Pad / Weight / Bushing - TFR USA Version New original Kinetic one speed TFR USA / Luna Double / Plus Super clutch pad / weight / bushing. This slides over the pins on your kinetic # 13304360 support plate. Works with > SKU 1687 complete clutch <*You only receive one. Specifications:10... MSRP: Now: $5.60 Out of stock Kinetic OEM | sku: 1773 Original Kinetic One Speed Clutch Shoe Set - TFR USA Version new OEM Kinetic Clutch shoe set (3 pads / shoes). These are for the TFR USA or Luna Double plus / Super version mopeds. *You must compare before purchasing, the older(1990s) TFR mopeds used the > Vespa style pads. <Kinetic # 13229270 and 06029600 MSRP: Now: $49.10 Add to Cart Kinetic OEM | sku: 1757 Original Kinetic Moped Pedal Crank Spindle Bushing - Each OEM Kinetic metal pedal crank arm bushing for the larger pedal cranks arms found on the TFR, Magnum and Luna. Does not fit the 16mm TFR USA type. You need one for each side of the pedal crank. Dimensions:20mm Inner Diameter26mm Outer Diameter31mm... MSRP: Now: $5.60 Add to Cart Kinetic OEM | sku: 1739 Kinetic Moped Starter Weights, Shoes / Pads - Non variated, TFR Original starter weights for Non-variated TFR Kinetic mopeds. *Be sure to compare before purchasing. Kinetic Part #03029450 Upgraded version available > here <Recommended Accessories:Starter Clutch SpringStarter Weight Retainer MSRP: Now: $35.07 Out of stock Kinetic OEM | sku: 1687 Original Kinetic TFR Moped Single Speed Clutch - 13227680 Original Kinetic TFR moped single speed clutch. Please please please compare before purchasing or send in pictures of your moped if not sure this is for you. May also fit the Piaggio Vespa Ciao.Single speeds only, not Variated models. Includes what... MSRP: Now: $129.06 Out of stock SALE Adige | sku: 1686 Vespa / Kinetic Non Variating Performance Clutch by Adige Italian made Adige performance clutch innards for Single speed non-variating version models. Fits inside the stock clutch bell. *Best for tuning projects up to 43mm cylinder size. Try it out, let us know. Fits: Single Speed -... MSRP: Was: $70.07 Now: $40.68 Add to Cart SALE Kinetic OEM | sku: 1667 OEM Kinetic 105mm Rear Drive Pulley for Non-Variated Mopeds - TFR New original 105mm Rear drive pulley for non variated Kinetic models like the TFR, Luna etc. This is the smooth round 11mm hole with a Woodruff keyway version.Grey. Please be sure to compare before purchasing. MSRP: Was: $21.04 Now: $14.01 Add to Cart Kinetic OEM | sku: 1637 Kinetic Moped Starter Weights, Shoes / Pads - Magnum, Luna, Swift Original starter weights for Kinetic mopeds. Installation is based upon the moped. one way for Magnum models, the other for Luna Swift models. No springs, no rubber pads. Kinetic Part # #05029590 Recommended Accessories:Starter Clutch Spring MSRP: Now: $35.07 Add to Cart Kinetic OEM | sku: 1641 Kinetic TFR Magnum RIGHT Pedal Crank Arm, 20mm - Chrome New RIGHT hand side chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though... MSRP: Now: $28.04 Add to Cart Kinetic OEM | sku: 1636 Kinetic TFR Magnum LEFT Pedal Crank Arm, 20mm - Chrome New LEFT chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though some newer... MSRP: Now: $28.04 Add to Cart CIF | sku: 745 CIF Clutch Set for Vespa / Kinetic Non-Variated Mopeds CIF repalcement 3 Piece Clutch Weight, spring and plate set. Made in Italy CIF Part # 5570K Fits: Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, SI Kinetic TFR and similar MSRP: Now: $49.03 Add to Cart DR Racing | sku: 492 Vespa Non-Variated Clutch Weight Set with springs. DR Racing Top quality DR Racing replacement 3 Piece Clutch Weight Set and Reinforced springs for additional acceleration performance, Fits: Non-Variated Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, Gillera, Cita, SI Kinetic TFR (not tfr usa) and... MSRP: Now: $39.28 Add to Cart Previous 1 2 Previous 1 2 Compare Selected × OK
Kinetic OEM | sku: 1774 Original Kinetic Clutch Pad / Weight / Bushing - TFR USA Version MSRP: Now: $5.60 Out of stock Kinetic OEM | sku: 1773 Original Kinetic One Speed Clutch Shoe Set - TFR USA Version MSRP: Now: $49.10 Add to Cart Kinetic OEM | sku: 1757 Original Kinetic Moped Pedal Crank Spindle Bushing - Each MSRP: Now: $5.60 Add to Cart Kinetic OEM | sku: 1739 Kinetic Moped Starter Weights, Shoes / Pads - Non variated, TFR MSRP: Now: $35.07 Out of stock Kinetic OEM | sku: 1687 Original Kinetic TFR Moped Single Speed Clutch - 13227680 MSRP: Now: $129.06 Out of stock SALE Adige | sku: 1686 Vespa / Kinetic Non Variating Performance Clutch by Adige MSRP: Was: $70.07 Now: $40.68 Add to Cart SALE Kinetic OEM | sku: 1667 OEM Kinetic 105mm Rear Drive Pulley for Non-Variated Mopeds - TFR MSRP: Was: $21.04 Now: $14.01 Add to Cart Kinetic OEM | sku: 1637 Kinetic Moped Starter Weights, Shoes / Pads - Magnum, Luna, Swift MSRP: Now: $35.07 Add to Cart Kinetic OEM | sku: 1641 Kinetic TFR Magnum RIGHT Pedal Crank Arm, 20mm - Chrome MSRP: Now: $28.04 Add to Cart Kinetic OEM | sku: 1636 Kinetic TFR Magnum LEFT Pedal Crank Arm, 20mm - Chrome MSRP: Now: $28.04 Add to Cart CIF | sku: 745 CIF Clutch Set for Vespa / Kinetic Non-Variated Mopeds MSRP: Now: $49.03 Add to Cart DR Racing | sku: 492 Vespa Non-Variated Clutch Weight Set with springs. DR Racing MSRP: Now: $39.28 Add to Cart Kinetic OEM | sku: KI-1789 Original Kinetic Non Variating Clutch Plate - TFR / Vespa Piaggio Original Kinetic Clutch plate for non variating mopeds. Will also fit Vespa Piaggio non variating mopeds. Intended for the old style Luna / TFR mopeds with > This Style Clutch < and > Shoes <*Be sure to compare before purchasing. Kinetic #... MSRP: Now: $11.21 Out of stock Ventico | sku: 1778 Vespa Piaggio Ciao 10mm x 950mm Ribbed Drive Belt for 80mm Pulley - Non Variated Ventico 10mm x 950mm drive belt for non variated Vespa Piaggio Ciao mopeds and some model TFR mopeds. For use on 80mm Pulleys.*May fit 95mm pulley but it will be a very tight fit. 10mm W x 8mm H x 950mm L MSRP: Now: $18.22 Add to Cart Kinetic OEM | sku: 1777 Original Kinetic One Speed Clutch Assembly, No Bell - TFR Original non variating Kinetic clutch assembly for single speed TFR / luna mopeds. Includes clutch plate, shoes, and springs. The clutch plate is D shaped on one side and circular on the other just like non variating Vespa Piaggio mopeds. *Be... MSRP: Now: $61.72 Out of stock SALE Kinetic OEM | sku: 1776 OEM Kinetic 95mm Rear Drive Pulley for Non-Variated Mopeds - TFR New original 95mm Rear drive pulley for non variated Kinetic models like the TFR, Luna etc. This is the smooth round 11mm hole with a Woodruff keyway version.Black. Please be sure to compare before purchasing. MSRP: Was: $21.04 Now: $14.01 Add to Cart Polini | sku: 1775 Polini Clutch Spring sets, 3 Tensions - Vespa & Kinetic New Polini clutch springs for non variated Vespa Piaggio mopeds and non variated TFR mopeds. (3)metal = stiff, (3)green = stiffer, (3)blue = Stiffest. *You must compare before purchasing, these can only be used for Vespa Piaggio mopeds or the... MSRP: Now: $44.89 Out of stock Kinetic OEM | sku: 1774 Original Kinetic Clutch Pad / Weight / Bushing - TFR USA Version New original Kinetic one speed TFR USA / Luna Double / Plus Super clutch pad / weight / bushing. This slides over the pins on your kinetic # 13304360 support plate. Works with > SKU 1687 complete clutch <*You only receive one. Specifications:10... MSRP: Now: $5.60 Out of stock Kinetic OEM | sku: 1773 Original Kinetic One Speed Clutch Shoe Set - TFR USA Version new OEM Kinetic Clutch shoe set (3 pads / shoes). These are for the TFR USA or Luna Double plus / Super version mopeds. *You must compare before purchasing, the older(1990s) TFR mopeds used the > Vespa style pads. <Kinetic # 13229270 and 06029600 MSRP: Now: $49.10 Add to Cart Kinetic OEM | sku: 1757 Original Kinetic Moped Pedal Crank Spindle Bushing - Each OEM Kinetic metal pedal crank arm bushing for the larger pedal cranks arms found on the TFR, Magnum and Luna. Does not fit the 16mm TFR USA type. You need one for each side of the pedal crank. Dimensions:20mm Inner Diameter26mm Outer Diameter31mm... MSRP: Now: $5.60 Add to Cart Kinetic OEM | sku: 1739 Kinetic Moped Starter Weights, Shoes / Pads - Non variated, TFR Original starter weights for Non-variated TFR Kinetic mopeds. *Be sure to compare before purchasing. Kinetic Part #03029450 Upgraded version available > here <Recommended Accessories:Starter Clutch SpringStarter Weight Retainer MSRP: Now: $35.07 Out of stock Kinetic OEM | sku: 1687 Original Kinetic TFR Moped Single Speed Clutch - 13227680 Original Kinetic TFR moped single speed clutch. Please please please compare before purchasing or send in pictures of your moped if not sure this is for you. May also fit the Piaggio Vespa Ciao.Single speeds only, not Variated models. Includes what... MSRP: Now: $129.06 Out of stock SALE Adige | sku: 1686 Vespa / Kinetic Non Variating Performance Clutch by Adige Italian made Adige performance clutch innards for Single speed non-variating version models. Fits inside the stock clutch bell. *Best for tuning projects up to 43mm cylinder size. Try it out, let us know. Fits: Single Speed -... MSRP: Was: $70.07 Now: $40.68 Add to Cart SALE Kinetic OEM | sku: 1667 OEM Kinetic 105mm Rear Drive Pulley for Non-Variated Mopeds - TFR New original 105mm Rear drive pulley for non variated Kinetic models like the TFR, Luna etc. This is the smooth round 11mm hole with a Woodruff keyway version.Grey. Please be sure to compare before purchasing. MSRP: Was: $21.04 Now: $14.01 Add to Cart Kinetic OEM | sku: 1637 Kinetic Moped Starter Weights, Shoes / Pads - Magnum, Luna, Swift Original starter weights for Kinetic mopeds. Installation is based upon the moped. one way for Magnum models, the other for Luna Swift models. No springs, no rubber pads. Kinetic Part # #05029590 Recommended Accessories:Starter Clutch Spring MSRP: Now: $35.07 Add to Cart Kinetic OEM | sku: 1641 Kinetic TFR Magnum RIGHT Pedal Crank Arm, 20mm - Chrome New RIGHT hand side chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though... MSRP: Now: $28.04 Add to Cart Kinetic OEM | sku: 1636 Kinetic TFR Magnum LEFT Pedal Crank Arm, 20mm - Chrome New LEFT chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though some newer... MSRP: Now: $28.04 Add to Cart CIF | sku: 745 CIF Clutch Set for Vespa / Kinetic Non-Variated Mopeds CIF repalcement 3 Piece Clutch Weight, spring and plate set. Made in Italy CIF Part # 5570K Fits: Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, SI Kinetic TFR and similar MSRP: Now: $49.03 Add to Cart DR Racing | sku: 492 Vespa Non-Variated Clutch Weight Set with springs. DR Racing Top quality DR Racing replacement 3 Piece Clutch Weight Set and Reinforced springs for additional acceleration performance, Fits: Non-Variated Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, Gillera, Cita, SI Kinetic TFR (not tfr usa) and... MSRP: Now: $39.28 Add to Cart Previous 1 2 Previous 1 2 Compare Selected × OK
Kinetic OEM | sku: 1773 Original Kinetic One Speed Clutch Shoe Set - TFR USA Version MSRP: Now: $49.10 Add to Cart Kinetic OEM | sku: 1757 Original Kinetic Moped Pedal Crank Spindle Bushing - Each MSRP: Now: $5.60 Add to Cart Kinetic OEM | sku: 1739 Kinetic Moped Starter Weights, Shoes / Pads - Non variated, TFR MSRP: Now: $35.07 Out of stock Kinetic OEM | sku: 1687 Original Kinetic TFR Moped Single Speed Clutch - 13227680 MSRP: Now: $129.06 Out of stock SALE Adige | sku: 1686 Vespa / Kinetic Non Variating Performance Clutch by Adige MSRP: Was: $70.07 Now: $40.68 Add to Cart SALE Kinetic OEM | sku: 1667 OEM Kinetic 105mm Rear Drive Pulley for Non-Variated Mopeds - TFR MSRP: Was: $21.04 Now: $14.01 Add to Cart Kinetic OEM | sku: 1637 Kinetic Moped Starter Weights, Shoes / Pads - Magnum, Luna, Swift MSRP: Now: $35.07 Add to Cart Kinetic OEM | sku: 1641 Kinetic TFR Magnum RIGHT Pedal Crank Arm, 20mm - Chrome MSRP: Now: $28.04 Add to Cart Kinetic OEM | sku: 1636 Kinetic TFR Magnum LEFT Pedal Crank Arm, 20mm - Chrome MSRP: Now: $28.04 Add to Cart CIF | sku: 745 CIF Clutch Set for Vespa / Kinetic Non-Variated Mopeds MSRP: Now: $49.03 Add to Cart DR Racing | sku: 492 Vespa Non-Variated Clutch Weight Set with springs. DR Racing MSRP: Now: $39.28 Add to Cart Kinetic OEM | sku: KI-1789 Original Kinetic Non Variating Clutch Plate - TFR / Vespa Piaggio Original Kinetic Clutch plate for non variating mopeds. Will also fit Vespa Piaggio non variating mopeds. Intended for the old style Luna / TFR mopeds with > This Style Clutch < and > Shoes <*Be sure to compare before purchasing. Kinetic #... MSRP: Now: $11.21 Out of stock Ventico | sku: 1778 Vespa Piaggio Ciao 10mm x 950mm Ribbed Drive Belt for 80mm Pulley - Non Variated Ventico 10mm x 950mm drive belt for non variated Vespa Piaggio Ciao mopeds and some model TFR mopeds. For use on 80mm Pulleys.*May fit 95mm pulley but it will be a very tight fit. 10mm W x 8mm H x 950mm L MSRP: Now: $18.22 Add to Cart Kinetic OEM | sku: 1777 Original Kinetic One Speed Clutch Assembly, No Bell - TFR Original non variating Kinetic clutch assembly for single speed TFR / luna mopeds. Includes clutch plate, shoes, and springs. The clutch plate is D shaped on one side and circular on the other just like non variating Vespa Piaggio mopeds. *Be... MSRP: Now: $61.72 Out of stock SALE Kinetic OEM | sku: 1776 OEM Kinetic 95mm Rear Drive Pulley for Non-Variated Mopeds - TFR New original 95mm Rear drive pulley for non variated Kinetic models like the TFR, Luna etc. This is the smooth round 11mm hole with a Woodruff keyway version.Black. Please be sure to compare before purchasing. MSRP: Was: $21.04 Now: $14.01 Add to Cart Polini | sku: 1775 Polini Clutch Spring sets, 3 Tensions - Vespa & Kinetic New Polini clutch springs for non variated Vespa Piaggio mopeds and non variated TFR mopeds. (3)metal = stiff, (3)green = stiffer, (3)blue = Stiffest. *You must compare before purchasing, these can only be used for Vespa Piaggio mopeds or the... MSRP: Now: $44.89 Out of stock Kinetic OEM | sku: 1774 Original Kinetic Clutch Pad / Weight / Bushing - TFR USA Version New original Kinetic one speed TFR USA / Luna Double / Plus Super clutch pad / weight / bushing. This slides over the pins on your kinetic # 13304360 support plate. Works with > SKU 1687 complete clutch <*You only receive one. Specifications:10... MSRP: Now: $5.60 Out of stock Kinetic OEM | sku: 1773 Original Kinetic One Speed Clutch Shoe Set - TFR USA Version new OEM Kinetic Clutch shoe set (3 pads / shoes). These are for the TFR USA or Luna Double plus / Super version mopeds. *You must compare before purchasing, the older(1990s) TFR mopeds used the > Vespa style pads. <Kinetic # 13229270 and 06029600 MSRP: Now: $49.10 Add to Cart Kinetic OEM | sku: 1757 Original Kinetic Moped Pedal Crank Spindle Bushing - Each OEM Kinetic metal pedal crank arm bushing for the larger pedal cranks arms found on the TFR, Magnum and Luna. Does not fit the 16mm TFR USA type. You need one for each side of the pedal crank. Dimensions:20mm Inner Diameter26mm Outer Diameter31mm... MSRP: Now: $5.60 Add to Cart Kinetic OEM | sku: 1739 Kinetic Moped Starter Weights, Shoes / Pads - Non variated, TFR Original starter weights for Non-variated TFR Kinetic mopeds. *Be sure to compare before purchasing. Kinetic Part #03029450 Upgraded version available > here <Recommended Accessories:Starter Clutch SpringStarter Weight Retainer MSRP: Now: $35.07 Out of stock Kinetic OEM | sku: 1687 Original Kinetic TFR Moped Single Speed Clutch - 13227680 Original Kinetic TFR moped single speed clutch. Please please please compare before purchasing or send in pictures of your moped if not sure this is for you. May also fit the Piaggio Vespa Ciao.Single speeds only, not Variated models. Includes what... MSRP: Now: $129.06 Out of stock SALE Adige | sku: 1686 Vespa / Kinetic Non Variating Performance Clutch by Adige Italian made Adige performance clutch innards for Single speed non-variating version models. Fits inside the stock clutch bell. *Best for tuning projects up to 43mm cylinder size. Try it out, let us know. Fits: Single Speed -... MSRP: Was: $70.07 Now: $40.68 Add to Cart SALE Kinetic OEM | sku: 1667 OEM Kinetic 105mm Rear Drive Pulley for Non-Variated Mopeds - TFR New original 105mm Rear drive pulley for non variated Kinetic models like the TFR, Luna etc. This is the smooth round 11mm hole with a Woodruff keyway version.Grey. Please be sure to compare before purchasing. MSRP: Was: $21.04 Now: $14.01 Add to Cart Kinetic OEM | sku: 1637 Kinetic Moped Starter Weights, Shoes / Pads - Magnum, Luna, Swift Original starter weights for Kinetic mopeds. Installation is based upon the moped. one way for Magnum models, the other for Luna Swift models. No springs, no rubber pads. Kinetic Part # #05029590 Recommended Accessories:Starter Clutch Spring MSRP: Now: $35.07 Add to Cart Kinetic OEM | sku: 1641 Kinetic TFR Magnum RIGHT Pedal Crank Arm, 20mm - Chrome New RIGHT hand side chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though... MSRP: Now: $28.04 Add to Cart Kinetic OEM | sku: 1636 Kinetic TFR Magnum LEFT Pedal Crank Arm, 20mm - Chrome New LEFT chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though some newer... MSRP: Now: $28.04 Add to Cart CIF | sku: 745 CIF Clutch Set for Vespa / Kinetic Non-Variated Mopeds CIF repalcement 3 Piece Clutch Weight, spring and plate set. Made in Italy CIF Part # 5570K Fits: Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, SI Kinetic TFR and similar MSRP: Now: $49.03 Add to Cart DR Racing | sku: 492 Vespa Non-Variated Clutch Weight Set with springs. DR Racing Top quality DR Racing replacement 3 Piece Clutch Weight Set and Reinforced springs for additional acceleration performance, Fits: Non-Variated Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, Gillera, Cita, SI Kinetic TFR (not tfr usa) and... MSRP: Now: $39.28 Add to Cart Previous 1 2 Previous 1 2 Compare Selected × OK
Kinetic OEM | sku: 1757 Original Kinetic Moped Pedal Crank Spindle Bushing - Each MSRP: Now: $5.60 Add to Cart Kinetic OEM | sku: 1739 Kinetic Moped Starter Weights, Shoes / Pads - Non variated, TFR MSRP: Now: $35.07 Out of stock Kinetic OEM | sku: 1687 Original Kinetic TFR Moped Single Speed Clutch - 13227680 MSRP: Now: $129.06 Out of stock SALE Adige | sku: 1686 Vespa / Kinetic Non Variating Performance Clutch by Adige MSRP: Was: $70.07 Now: $40.68 Add to Cart SALE Kinetic OEM | sku: 1667 OEM Kinetic 105mm Rear Drive Pulley for Non-Variated Mopeds - TFR MSRP: Was: $21.04 Now: $14.01 Add to Cart Kinetic OEM | sku: 1637 Kinetic Moped Starter Weights, Shoes / Pads - Magnum, Luna, Swift MSRP: Now: $35.07 Add to Cart Kinetic OEM | sku: 1641 Kinetic TFR Magnum RIGHT Pedal Crank Arm, 20mm - Chrome MSRP: Now: $28.04 Add to Cart Kinetic OEM | sku: 1636 Kinetic TFR Magnum LEFT Pedal Crank Arm, 20mm - Chrome MSRP: Now: $28.04 Add to Cart CIF | sku: 745 CIF Clutch Set for Vespa / Kinetic Non-Variated Mopeds MSRP: Now: $49.03 Add to Cart DR Racing | sku: 492 Vespa Non-Variated Clutch Weight Set with springs. DR Racing MSRP: Now: $39.28 Add to Cart Kinetic OEM | sku: KI-1789 Original Kinetic Non Variating Clutch Plate - TFR / Vespa Piaggio Original Kinetic Clutch plate for non variating mopeds. Will also fit Vespa Piaggio non variating mopeds. Intended for the old style Luna / TFR mopeds with > This Style Clutch < and > Shoes <*Be sure to compare before purchasing. Kinetic #... MSRP: Now: $11.21 Out of stock Ventico | sku: 1778 Vespa Piaggio Ciao 10mm x 950mm Ribbed Drive Belt for 80mm Pulley - Non Variated Ventico 10mm x 950mm drive belt for non variated Vespa Piaggio Ciao mopeds and some model TFR mopeds. For use on 80mm Pulleys.*May fit 95mm pulley but it will be a very tight fit. 10mm W x 8mm H x 950mm L MSRP: Now: $18.22 Add to Cart Kinetic OEM | sku: 1777 Original Kinetic One Speed Clutch Assembly, No Bell - TFR Original non variating Kinetic clutch assembly for single speed TFR / luna mopeds. Includes clutch plate, shoes, and springs. The clutch plate is D shaped on one side and circular on the other just like non variating Vespa Piaggio mopeds. *Be... MSRP: Now: $61.72 Out of stock SALE Kinetic OEM | sku: 1776 OEM Kinetic 95mm Rear Drive Pulley for Non-Variated Mopeds - TFR New original 95mm Rear drive pulley for non variated Kinetic models like the TFR, Luna etc. This is the smooth round 11mm hole with a Woodruff keyway version.Black. Please be sure to compare before purchasing. MSRP: Was: $21.04 Now: $14.01 Add to Cart Polini | sku: 1775 Polini Clutch Spring sets, 3 Tensions - Vespa & Kinetic New Polini clutch springs for non variated Vespa Piaggio mopeds and non variated TFR mopeds. (3)metal = stiff, (3)green = stiffer, (3)blue = Stiffest. *You must compare before purchasing, these can only be used for Vespa Piaggio mopeds or the... MSRP: Now: $44.89 Out of stock Kinetic OEM | sku: 1774 Original Kinetic Clutch Pad / Weight / Bushing - TFR USA Version New original Kinetic one speed TFR USA / Luna Double / Plus Super clutch pad / weight / bushing. This slides over the pins on your kinetic # 13304360 support plate. Works with > SKU 1687 complete clutch <*You only receive one. Specifications:10... MSRP: Now: $5.60 Out of stock Kinetic OEM | sku: 1773 Original Kinetic One Speed Clutch Shoe Set - TFR USA Version new OEM Kinetic Clutch shoe set (3 pads / shoes). These are for the TFR USA or Luna Double plus / Super version mopeds. *You must compare before purchasing, the older(1990s) TFR mopeds used the > Vespa style pads. <Kinetic # 13229270 and 06029600 MSRP: Now: $49.10 Add to Cart Kinetic OEM | sku: 1757 Original Kinetic Moped Pedal Crank Spindle Bushing - Each OEM Kinetic metal pedal crank arm bushing for the larger pedal cranks arms found on the TFR, Magnum and Luna. Does not fit the 16mm TFR USA type. You need one for each side of the pedal crank. Dimensions:20mm Inner Diameter26mm Outer Diameter31mm... MSRP: Now: $5.60 Add to Cart Kinetic OEM | sku: 1739 Kinetic Moped Starter Weights, Shoes / Pads - Non variated, TFR Original starter weights for Non-variated TFR Kinetic mopeds. *Be sure to compare before purchasing. Kinetic Part #03029450 Upgraded version available > here <Recommended Accessories:Starter Clutch SpringStarter Weight Retainer MSRP: Now: $35.07 Out of stock Kinetic OEM | sku: 1687 Original Kinetic TFR Moped Single Speed Clutch - 13227680 Original Kinetic TFR moped single speed clutch. Please please please compare before purchasing or send in pictures of your moped if not sure this is for you. May also fit the Piaggio Vespa Ciao.Single speeds only, not Variated models. Includes what... MSRP: Now: $129.06 Out of stock SALE Adige | sku: 1686 Vespa / Kinetic Non Variating Performance Clutch by Adige Italian made Adige performance clutch innards for Single speed non-variating version models. Fits inside the stock clutch bell. *Best for tuning projects up to 43mm cylinder size. Try it out, let us know. Fits: Single Speed -... MSRP: Was: $70.07 Now: $40.68 Add to Cart SALE Kinetic OEM | sku: 1667 OEM Kinetic 105mm Rear Drive Pulley for Non-Variated Mopeds - TFR New original 105mm Rear drive pulley for non variated Kinetic models like the TFR, Luna etc. This is the smooth round 11mm hole with a Woodruff keyway version.Grey. Please be sure to compare before purchasing. MSRP: Was: $21.04 Now: $14.01 Add to Cart Kinetic OEM | sku: 1637 Kinetic Moped Starter Weights, Shoes / Pads - Magnum, Luna, Swift Original starter weights for Kinetic mopeds. Installation is based upon the moped. one way for Magnum models, the other for Luna Swift models. No springs, no rubber pads. Kinetic Part # #05029590 Recommended Accessories:Starter Clutch Spring MSRP: Now: $35.07 Add to Cart Kinetic OEM | sku: 1641 Kinetic TFR Magnum RIGHT Pedal Crank Arm, 20mm - Chrome New RIGHT hand side chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though... MSRP: Now: $28.04 Add to Cart Kinetic OEM | sku: 1636 Kinetic TFR Magnum LEFT Pedal Crank Arm, 20mm - Chrome New LEFT chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though some newer... MSRP: Now: $28.04 Add to Cart CIF | sku: 745 CIF Clutch Set for Vespa / Kinetic Non-Variated Mopeds CIF repalcement 3 Piece Clutch Weight, spring and plate set. Made in Italy CIF Part # 5570K Fits: Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, SI Kinetic TFR and similar MSRP: Now: $49.03 Add to Cart DR Racing | sku: 492 Vespa Non-Variated Clutch Weight Set with springs. DR Racing Top quality DR Racing replacement 3 Piece Clutch Weight Set and Reinforced springs for additional acceleration performance, Fits: Non-Variated Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, Gillera, Cita, SI Kinetic TFR (not tfr usa) and... MSRP: Now: $39.28 Add to Cart Previous 1 2 Previous 1 2 Compare Selected × OK
Kinetic OEM | sku: 1739 Kinetic Moped Starter Weights, Shoes / Pads - Non variated, TFR MSRP: Now: $35.07 Out of stock Kinetic OEM | sku: 1687 Original Kinetic TFR Moped Single Speed Clutch - 13227680 MSRP: Now: $129.06 Out of stock SALE Adige | sku: 1686 Vespa / Kinetic Non Variating Performance Clutch by Adige MSRP: Was: $70.07 Now: $40.68 Add to Cart SALE Kinetic OEM | sku: 1667 OEM Kinetic 105mm Rear Drive Pulley for Non-Variated Mopeds - TFR MSRP: Was: $21.04 Now: $14.01 Add to Cart Kinetic OEM | sku: 1637 Kinetic Moped Starter Weights, Shoes / Pads - Magnum, Luna, Swift MSRP: Now: $35.07 Add to Cart Kinetic OEM | sku: 1641 Kinetic TFR Magnum RIGHT Pedal Crank Arm, 20mm - Chrome MSRP: Now: $28.04 Add to Cart Kinetic OEM | sku: 1636 Kinetic TFR Magnum LEFT Pedal Crank Arm, 20mm - Chrome MSRP: Now: $28.04 Add to Cart CIF | sku: 745 CIF Clutch Set for Vespa / Kinetic Non-Variated Mopeds MSRP: Now: $49.03 Add to Cart DR Racing | sku: 492 Vespa Non-Variated Clutch Weight Set with springs. DR Racing MSRP: Now: $39.28 Add to Cart Kinetic OEM | sku: KI-1789 Original Kinetic Non Variating Clutch Plate - TFR / Vespa Piaggio Original Kinetic Clutch plate for non variating mopeds. Will also fit Vespa Piaggio non variating mopeds. Intended for the old style Luna / TFR mopeds with > This Style Clutch < and > Shoes <*Be sure to compare before purchasing. Kinetic #... MSRP: Now: $11.21 Out of stock Ventico | sku: 1778 Vespa Piaggio Ciao 10mm x 950mm Ribbed Drive Belt for 80mm Pulley - Non Variated Ventico 10mm x 950mm drive belt for non variated Vespa Piaggio Ciao mopeds and some model TFR mopeds. For use on 80mm Pulleys.*May fit 95mm pulley but it will be a very tight fit. 10mm W x 8mm H x 950mm L MSRP: Now: $18.22 Add to Cart Kinetic OEM | sku: 1777 Original Kinetic One Speed Clutch Assembly, No Bell - TFR Original non variating Kinetic clutch assembly for single speed TFR / luna mopeds. Includes clutch plate, shoes, and springs. The clutch plate is D shaped on one side and circular on the other just like non variating Vespa Piaggio mopeds. *Be... MSRP: Now: $61.72 Out of stock SALE Kinetic OEM | sku: 1776 OEM Kinetic 95mm Rear Drive Pulley for Non-Variated Mopeds - TFR New original 95mm Rear drive pulley for non variated Kinetic models like the TFR, Luna etc. This is the smooth round 11mm hole with a Woodruff keyway version.Black. Please be sure to compare before purchasing. MSRP: Was: $21.04 Now: $14.01 Add to Cart Polini | sku: 1775 Polini Clutch Spring sets, 3 Tensions - Vespa & Kinetic New Polini clutch springs for non variated Vespa Piaggio mopeds and non variated TFR mopeds. (3)metal = stiff, (3)green = stiffer, (3)blue = Stiffest. *You must compare before purchasing, these can only be used for Vespa Piaggio mopeds or the... MSRP: Now: $44.89 Out of stock Kinetic OEM | sku: 1774 Original Kinetic Clutch Pad / Weight / Bushing - TFR USA Version New original Kinetic one speed TFR USA / Luna Double / Plus Super clutch pad / weight / bushing. This slides over the pins on your kinetic # 13304360 support plate. Works with > SKU 1687 complete clutch <*You only receive one. Specifications:10... MSRP: Now: $5.60 Out of stock Kinetic OEM | sku: 1773 Original Kinetic One Speed Clutch Shoe Set - TFR USA Version new OEM Kinetic Clutch shoe set (3 pads / shoes). These are for the TFR USA or Luna Double plus / Super version mopeds. *You must compare before purchasing, the older(1990s) TFR mopeds used the > Vespa style pads. <Kinetic # 13229270 and 06029600 MSRP: Now: $49.10 Add to Cart Kinetic OEM | sku: 1757 Original Kinetic Moped Pedal Crank Spindle Bushing - Each OEM Kinetic metal pedal crank arm bushing for the larger pedal cranks arms found on the TFR, Magnum and Luna. Does not fit the 16mm TFR USA type. You need one for each side of the pedal crank. Dimensions:20mm Inner Diameter26mm Outer Diameter31mm... MSRP: Now: $5.60 Add to Cart Kinetic OEM | sku: 1739 Kinetic Moped Starter Weights, Shoes / Pads - Non variated, TFR Original starter weights for Non-variated TFR Kinetic mopeds. *Be sure to compare before purchasing. Kinetic Part #03029450 Upgraded version available > here <Recommended Accessories:Starter Clutch SpringStarter Weight Retainer MSRP: Now: $35.07 Out of stock Kinetic OEM | sku: 1687 Original Kinetic TFR Moped Single Speed Clutch - 13227680 Original Kinetic TFR moped single speed clutch. Please please please compare before purchasing or send in pictures of your moped if not sure this is for you. May also fit the Piaggio Vespa Ciao.Single speeds only, not Variated models. Includes what... MSRP: Now: $129.06 Out of stock SALE Adige | sku: 1686 Vespa / Kinetic Non Variating Performance Clutch by Adige Italian made Adige performance clutch innards for Single speed non-variating version models. Fits inside the stock clutch bell. *Best for tuning projects up to 43mm cylinder size. Try it out, let us know. Fits: Single Speed -... MSRP: Was: $70.07 Now: $40.68 Add to Cart SALE Kinetic OEM | sku: 1667 OEM Kinetic 105mm Rear Drive Pulley for Non-Variated Mopeds - TFR New original 105mm Rear drive pulley for non variated Kinetic models like the TFR, Luna etc. This is the smooth round 11mm hole with a Woodruff keyway version.Grey. Please be sure to compare before purchasing. MSRP: Was: $21.04 Now: $14.01 Add to Cart Kinetic OEM | sku: 1637 Kinetic Moped Starter Weights, Shoes / Pads - Magnum, Luna, Swift Original starter weights for Kinetic mopeds. Installation is based upon the moped. one way for Magnum models, the other for Luna Swift models. No springs, no rubber pads. Kinetic Part # #05029590 Recommended Accessories:Starter Clutch Spring MSRP: Now: $35.07 Add to Cart Kinetic OEM | sku: 1641 Kinetic TFR Magnum RIGHT Pedal Crank Arm, 20mm - Chrome New RIGHT hand side chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though... MSRP: Now: $28.04 Add to Cart Kinetic OEM | sku: 1636 Kinetic TFR Magnum LEFT Pedal Crank Arm, 20mm - Chrome New LEFT chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though some newer... MSRP: Now: $28.04 Add to Cart CIF | sku: 745 CIF Clutch Set for Vespa / Kinetic Non-Variated Mopeds CIF repalcement 3 Piece Clutch Weight, spring and plate set. Made in Italy CIF Part # 5570K Fits: Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, SI Kinetic TFR and similar MSRP: Now: $49.03 Add to Cart DR Racing | sku: 492 Vespa Non-Variated Clutch Weight Set with springs. DR Racing Top quality DR Racing replacement 3 Piece Clutch Weight Set and Reinforced springs for additional acceleration performance, Fits: Non-Variated Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, Gillera, Cita, SI Kinetic TFR (not tfr usa) and... MSRP: Now: $39.28 Add to Cart Previous 1 2 Previous 1 2 Compare Selected × OK
Kinetic OEM | sku: 1687 Original Kinetic TFR Moped Single Speed Clutch - 13227680 MSRP: Now: $129.06 Out of stock SALE Adige | sku: 1686 Vespa / Kinetic Non Variating Performance Clutch by Adige MSRP: Was: $70.07 Now: $40.68 Add to Cart SALE Kinetic OEM | sku: 1667 OEM Kinetic 105mm Rear Drive Pulley for Non-Variated Mopeds - TFR MSRP: Was: $21.04 Now: $14.01 Add to Cart Kinetic OEM | sku: 1637 Kinetic Moped Starter Weights, Shoes / Pads - Magnum, Luna, Swift MSRP: Now: $35.07 Add to Cart Kinetic OEM | sku: 1641 Kinetic TFR Magnum RIGHT Pedal Crank Arm, 20mm - Chrome MSRP: Now: $28.04 Add to Cart Kinetic OEM | sku: 1636 Kinetic TFR Magnum LEFT Pedal Crank Arm, 20mm - Chrome MSRP: Now: $28.04 Add to Cart CIF | sku: 745 CIF Clutch Set for Vespa / Kinetic Non-Variated Mopeds MSRP: Now: $49.03 Add to Cart DR Racing | sku: 492 Vespa Non-Variated Clutch Weight Set with springs. DR Racing MSRP: Now: $39.28 Add to Cart Kinetic OEM | sku: KI-1789 Original Kinetic Non Variating Clutch Plate - TFR / Vespa Piaggio Original Kinetic Clutch plate for non variating mopeds. Will also fit Vespa Piaggio non variating mopeds. Intended for the old style Luna / TFR mopeds with > This Style Clutch < and > Shoes <*Be sure to compare before purchasing. Kinetic #... MSRP: Now: $11.21 Out of stock Ventico | sku: 1778 Vespa Piaggio Ciao 10mm x 950mm Ribbed Drive Belt for 80mm Pulley - Non Variated Ventico 10mm x 950mm drive belt for non variated Vespa Piaggio Ciao mopeds and some model TFR mopeds. For use on 80mm Pulleys.*May fit 95mm pulley but it will be a very tight fit. 10mm W x 8mm H x 950mm L MSRP: Now: $18.22 Add to Cart Kinetic OEM | sku: 1777 Original Kinetic One Speed Clutch Assembly, No Bell - TFR Original non variating Kinetic clutch assembly for single speed TFR / luna mopeds. Includes clutch plate, shoes, and springs. The clutch plate is D shaped on one side and circular on the other just like non variating Vespa Piaggio mopeds. *Be... MSRP: Now: $61.72 Out of stock SALE Kinetic OEM | sku: 1776 OEM Kinetic 95mm Rear Drive Pulley for Non-Variated Mopeds - TFR New original 95mm Rear drive pulley for non variated Kinetic models like the TFR, Luna etc. This is the smooth round 11mm hole with a Woodruff keyway version.Black. Please be sure to compare before purchasing. MSRP: Was: $21.04 Now: $14.01 Add to Cart Polini | sku: 1775 Polini Clutch Spring sets, 3 Tensions - Vespa & Kinetic New Polini clutch springs for non variated Vespa Piaggio mopeds and non variated TFR mopeds. (3)metal = stiff, (3)green = stiffer, (3)blue = Stiffest. *You must compare before purchasing, these can only be used for Vespa Piaggio mopeds or the... MSRP: Now: $44.89 Out of stock Kinetic OEM | sku: 1774 Original Kinetic Clutch Pad / Weight / Bushing - TFR USA Version New original Kinetic one speed TFR USA / Luna Double / Plus Super clutch pad / weight / bushing. This slides over the pins on your kinetic # 13304360 support plate. Works with > SKU 1687 complete clutch <*You only receive one. Specifications:10... MSRP: Now: $5.60 Out of stock Kinetic OEM | sku: 1773 Original Kinetic One Speed Clutch Shoe Set - TFR USA Version new OEM Kinetic Clutch shoe set (3 pads / shoes). These are for the TFR USA or Luna Double plus / Super version mopeds. *You must compare before purchasing, the older(1990s) TFR mopeds used the > Vespa style pads. <Kinetic # 13229270 and 06029600 MSRP: Now: $49.10 Add to Cart Kinetic OEM | sku: 1757 Original Kinetic Moped Pedal Crank Spindle Bushing - Each OEM Kinetic metal pedal crank arm bushing for the larger pedal cranks arms found on the TFR, Magnum and Luna. Does not fit the 16mm TFR USA type. You need one for each side of the pedal crank. Dimensions:20mm Inner Diameter26mm Outer Diameter31mm... MSRP: Now: $5.60 Add to Cart Kinetic OEM | sku: 1739 Kinetic Moped Starter Weights, Shoes / Pads - Non variated, TFR Original starter weights for Non-variated TFR Kinetic mopeds. *Be sure to compare before purchasing. Kinetic Part #03029450 Upgraded version available > here <Recommended Accessories:Starter Clutch SpringStarter Weight Retainer MSRP: Now: $35.07 Out of stock Kinetic OEM | sku: 1687 Original Kinetic TFR Moped Single Speed Clutch - 13227680 Original Kinetic TFR moped single speed clutch. Please please please compare before purchasing or send in pictures of your moped if not sure this is for you. May also fit the Piaggio Vespa Ciao.Single speeds only, not Variated models. Includes what... MSRP: Now: $129.06 Out of stock SALE Adige | sku: 1686 Vespa / Kinetic Non Variating Performance Clutch by Adige Italian made Adige performance clutch innards for Single speed non-variating version models. Fits inside the stock clutch bell. *Best for tuning projects up to 43mm cylinder size. Try it out, let us know. Fits: Single Speed -... MSRP: Was: $70.07 Now: $40.68 Add to Cart SALE Kinetic OEM | sku: 1667 OEM Kinetic 105mm Rear Drive Pulley for Non-Variated Mopeds - TFR New original 105mm Rear drive pulley for non variated Kinetic models like the TFR, Luna etc. This is the smooth round 11mm hole with a Woodruff keyway version.Grey. Please be sure to compare before purchasing. MSRP: Was: $21.04 Now: $14.01 Add to Cart Kinetic OEM | sku: 1637 Kinetic Moped Starter Weights, Shoes / Pads - Magnum, Luna, Swift Original starter weights for Kinetic mopeds. Installation is based upon the moped. one way for Magnum models, the other for Luna Swift models. No springs, no rubber pads. Kinetic Part # #05029590 Recommended Accessories:Starter Clutch Spring MSRP: Now: $35.07 Add to Cart Kinetic OEM | sku: 1641 Kinetic TFR Magnum RIGHT Pedal Crank Arm, 20mm - Chrome New RIGHT hand side chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though... MSRP: Now: $28.04 Add to Cart Kinetic OEM | sku: 1636 Kinetic TFR Magnum LEFT Pedal Crank Arm, 20mm - Chrome New LEFT chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though some newer... MSRP: Now: $28.04 Add to Cart CIF | sku: 745 CIF Clutch Set for Vespa / Kinetic Non-Variated Mopeds CIF repalcement 3 Piece Clutch Weight, spring and plate set. Made in Italy CIF Part # 5570K Fits: Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, SI Kinetic TFR and similar MSRP: Now: $49.03 Add to Cart DR Racing | sku: 492 Vespa Non-Variated Clutch Weight Set with springs. DR Racing Top quality DR Racing replacement 3 Piece Clutch Weight Set and Reinforced springs for additional acceleration performance, Fits: Non-Variated Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, Gillera, Cita, SI Kinetic TFR (not tfr usa) and... MSRP: Now: $39.28 Add to Cart Previous 1 2 Previous 1 2 Compare Selected × OK
SALE Adige | sku: 1686 Vespa / Kinetic Non Variating Performance Clutch by Adige MSRP: Was: $70.07 Now: $40.68 Add to Cart
SALE Kinetic OEM | sku: 1667 OEM Kinetic 105mm Rear Drive Pulley for Non-Variated Mopeds - TFR MSRP: Was: $21.04 Now: $14.01 Add to Cart
Kinetic OEM | sku: 1637 Kinetic Moped Starter Weights, Shoes / Pads - Magnum, Luna, Swift MSRP: Now: $35.07 Add to Cart Kinetic OEM | sku: 1641 Kinetic TFR Magnum RIGHT Pedal Crank Arm, 20mm - Chrome MSRP: Now: $28.04 Add to Cart Kinetic OEM | sku: 1636 Kinetic TFR Magnum LEFT Pedal Crank Arm, 20mm - Chrome MSRP: Now: $28.04 Add to Cart CIF | sku: 745 CIF Clutch Set for Vespa / Kinetic Non-Variated Mopeds MSRP: Now: $49.03 Add to Cart DR Racing | sku: 492 Vespa Non-Variated Clutch Weight Set with springs. DR Racing MSRP: Now: $39.28 Add to Cart Kinetic OEM | sku: KI-1789 Original Kinetic Non Variating Clutch Plate - TFR / Vespa Piaggio Original Kinetic Clutch plate for non variating mopeds. Will also fit Vespa Piaggio non variating mopeds. Intended for the old style Luna / TFR mopeds with > This Style Clutch < and > Shoes <*Be sure to compare before purchasing. Kinetic #... MSRP: Now: $11.21 Out of stock Ventico | sku: 1778 Vespa Piaggio Ciao 10mm x 950mm Ribbed Drive Belt for 80mm Pulley - Non Variated Ventico 10mm x 950mm drive belt for non variated Vespa Piaggio Ciao mopeds and some model TFR mopeds. For use on 80mm Pulleys.*May fit 95mm pulley but it will be a very tight fit. 10mm W x 8mm H x 950mm L MSRP: Now: $18.22 Add to Cart Kinetic OEM | sku: 1777 Original Kinetic One Speed Clutch Assembly, No Bell - TFR Original non variating Kinetic clutch assembly for single speed TFR / luna mopeds. Includes clutch plate, shoes, and springs. The clutch plate is D shaped on one side and circular on the other just like non variating Vespa Piaggio mopeds. *Be... MSRP: Now: $61.72 Out of stock SALE Kinetic OEM | sku: 1776 OEM Kinetic 95mm Rear Drive Pulley for Non-Variated Mopeds - TFR New original 95mm Rear drive pulley for non variated Kinetic models like the TFR, Luna etc. This is the smooth round 11mm hole with a Woodruff keyway version.Black. Please be sure to compare before purchasing. MSRP: Was: $21.04 Now: $14.01 Add to Cart Polini | sku: 1775 Polini Clutch Spring sets, 3 Tensions - Vespa & Kinetic New Polini clutch springs for non variated Vespa Piaggio mopeds and non variated TFR mopeds. (3)metal = stiff, (3)green = stiffer, (3)blue = Stiffest. *You must compare before purchasing, these can only be used for Vespa Piaggio mopeds or the... MSRP: Now: $44.89 Out of stock Kinetic OEM | sku: 1774 Original Kinetic Clutch Pad / Weight / Bushing - TFR USA Version New original Kinetic one speed TFR USA / Luna Double / Plus Super clutch pad / weight / bushing. This slides over the pins on your kinetic # 13304360 support plate. Works with > SKU 1687 complete clutch <*You only receive one. Specifications:10... MSRP: Now: $5.60 Out of stock Kinetic OEM | sku: 1773 Original Kinetic One Speed Clutch Shoe Set - TFR USA Version new OEM Kinetic Clutch shoe set (3 pads / shoes). These are for the TFR USA or Luna Double plus / Super version mopeds. *You must compare before purchasing, the older(1990s) TFR mopeds used the > Vespa style pads. <Kinetic # 13229270 and 06029600 MSRP: Now: $49.10 Add to Cart Kinetic OEM | sku: 1757 Original Kinetic Moped Pedal Crank Spindle Bushing - Each OEM Kinetic metal pedal crank arm bushing for the larger pedal cranks arms found on the TFR, Magnum and Luna. Does not fit the 16mm TFR USA type. You need one for each side of the pedal crank. Dimensions:20mm Inner Diameter26mm Outer Diameter31mm... MSRP: Now: $5.60 Add to Cart Kinetic OEM | sku: 1739 Kinetic Moped Starter Weights, Shoes / Pads - Non variated, TFR Original starter weights for Non-variated TFR Kinetic mopeds. *Be sure to compare before purchasing. Kinetic Part #03029450 Upgraded version available > here <Recommended Accessories:Starter Clutch SpringStarter Weight Retainer MSRP: Now: $35.07 Out of stock Kinetic OEM | sku: 1687 Original Kinetic TFR Moped Single Speed Clutch - 13227680 Original Kinetic TFR moped single speed clutch. Please please please compare before purchasing or send in pictures of your moped if not sure this is for you. May also fit the Piaggio Vespa Ciao.Single speeds only, not Variated models. Includes what... MSRP: Now: $129.06 Out of stock SALE Adige | sku: 1686 Vespa / Kinetic Non Variating Performance Clutch by Adige Italian made Adige performance clutch innards for Single speed non-variating version models. Fits inside the stock clutch bell. *Best for tuning projects up to 43mm cylinder size. Try it out, let us know. Fits: Single Speed -... MSRP: Was: $70.07 Now: $40.68 Add to Cart SALE Kinetic OEM | sku: 1667 OEM Kinetic 105mm Rear Drive Pulley for Non-Variated Mopeds - TFR New original 105mm Rear drive pulley for non variated Kinetic models like the TFR, Luna etc. This is the smooth round 11mm hole with a Woodruff keyway version.Grey. Please be sure to compare before purchasing. MSRP: Was: $21.04 Now: $14.01 Add to Cart Kinetic OEM | sku: 1637 Kinetic Moped Starter Weights, Shoes / Pads - Magnum, Luna, Swift Original starter weights for Kinetic mopeds. Installation is based upon the moped. one way for Magnum models, the other for Luna Swift models. No springs, no rubber pads. Kinetic Part # #05029590 Recommended Accessories:Starter Clutch Spring MSRP: Now: $35.07 Add to Cart Kinetic OEM | sku: 1641 Kinetic TFR Magnum RIGHT Pedal Crank Arm, 20mm - Chrome New RIGHT hand side chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though... MSRP: Now: $28.04 Add to Cart Kinetic OEM | sku: 1636 Kinetic TFR Magnum LEFT Pedal Crank Arm, 20mm - Chrome New LEFT chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though some newer... MSRP: Now: $28.04 Add to Cart CIF | sku: 745 CIF Clutch Set for Vespa / Kinetic Non-Variated Mopeds CIF repalcement 3 Piece Clutch Weight, spring and plate set. Made in Italy CIF Part # 5570K Fits: Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, SI Kinetic TFR and similar MSRP: Now: $49.03 Add to Cart DR Racing | sku: 492 Vespa Non-Variated Clutch Weight Set with springs. DR Racing Top quality DR Racing replacement 3 Piece Clutch Weight Set and Reinforced springs for additional acceleration performance, Fits: Non-Variated Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, Gillera, Cita, SI Kinetic TFR (not tfr usa) and... MSRP: Now: $39.28 Add to Cart Previous 1 2 Previous 1 2 Compare Selected × OK
Kinetic OEM | sku: 1641 Kinetic TFR Magnum RIGHT Pedal Crank Arm, 20mm - Chrome MSRP: Now: $28.04 Add to Cart Kinetic OEM | sku: 1636 Kinetic TFR Magnum LEFT Pedal Crank Arm, 20mm - Chrome MSRP: Now: $28.04 Add to Cart CIF | sku: 745 CIF Clutch Set for Vespa / Kinetic Non-Variated Mopeds MSRP: Now: $49.03 Add to Cart DR Racing | sku: 492 Vespa Non-Variated Clutch Weight Set with springs. DR Racing MSRP: Now: $39.28 Add to Cart Kinetic OEM | sku: KI-1789 Original Kinetic Non Variating Clutch Plate - TFR / Vespa Piaggio Original Kinetic Clutch plate for non variating mopeds. Will also fit Vespa Piaggio non variating mopeds. Intended for the old style Luna / TFR mopeds with > This Style Clutch < and > Shoes <*Be sure to compare before purchasing. Kinetic #... MSRP: Now: $11.21 Out of stock Ventico | sku: 1778 Vespa Piaggio Ciao 10mm x 950mm Ribbed Drive Belt for 80mm Pulley - Non Variated Ventico 10mm x 950mm drive belt for non variated Vespa Piaggio Ciao mopeds and some model TFR mopeds. For use on 80mm Pulleys.*May fit 95mm pulley but it will be a very tight fit. 10mm W x 8mm H x 950mm L MSRP: Now: $18.22 Add to Cart Kinetic OEM | sku: 1777 Original Kinetic One Speed Clutch Assembly, No Bell - TFR Original non variating Kinetic clutch assembly for single speed TFR / luna mopeds. Includes clutch plate, shoes, and springs. The clutch plate is D shaped on one side and circular on the other just like non variating Vespa Piaggio mopeds. *Be... MSRP: Now: $61.72 Out of stock SALE Kinetic OEM | sku: 1776 OEM Kinetic 95mm Rear Drive Pulley for Non-Variated Mopeds - TFR New original 95mm Rear drive pulley for non variated Kinetic models like the TFR, Luna etc. This is the smooth round 11mm hole with a Woodruff keyway version.Black. Please be sure to compare before purchasing. MSRP: Was: $21.04 Now: $14.01 Add to Cart Polini | sku: 1775 Polini Clutch Spring sets, 3 Tensions - Vespa & Kinetic New Polini clutch springs for non variated Vespa Piaggio mopeds and non variated TFR mopeds. (3)metal = stiff, (3)green = stiffer, (3)blue = Stiffest. *You must compare before purchasing, these can only be used for Vespa Piaggio mopeds or the... MSRP: Now: $44.89 Out of stock Kinetic OEM | sku: 1774 Original Kinetic Clutch Pad / Weight / Bushing - TFR USA Version New original Kinetic one speed TFR USA / Luna Double / Plus Super clutch pad / weight / bushing. This slides over the pins on your kinetic # 13304360 support plate. Works with > SKU 1687 complete clutch <*You only receive one. Specifications:10... MSRP: Now: $5.60 Out of stock Kinetic OEM | sku: 1773 Original Kinetic One Speed Clutch Shoe Set - TFR USA Version new OEM Kinetic Clutch shoe set (3 pads / shoes). These are for the TFR USA or Luna Double plus / Super version mopeds. *You must compare before purchasing, the older(1990s) TFR mopeds used the > Vespa style pads. <Kinetic # 13229270 and 06029600 MSRP: Now: $49.10 Add to Cart Kinetic OEM | sku: 1757 Original Kinetic Moped Pedal Crank Spindle Bushing - Each OEM Kinetic metal pedal crank arm bushing for the larger pedal cranks arms found on the TFR, Magnum and Luna. Does not fit the 16mm TFR USA type. You need one for each side of the pedal crank. Dimensions:20mm Inner Diameter26mm Outer Diameter31mm... MSRP: Now: $5.60 Add to Cart Kinetic OEM | sku: 1739 Kinetic Moped Starter Weights, Shoes / Pads - Non variated, TFR Original starter weights for Non-variated TFR Kinetic mopeds. *Be sure to compare before purchasing. Kinetic Part #03029450 Upgraded version available > here <Recommended Accessories:Starter Clutch SpringStarter Weight Retainer MSRP: Now: $35.07 Out of stock Kinetic OEM | sku: 1687 Original Kinetic TFR Moped Single Speed Clutch - 13227680 Original Kinetic TFR moped single speed clutch. Please please please compare before purchasing or send in pictures of your moped if not sure this is for you. May also fit the Piaggio Vespa Ciao.Single speeds only, not Variated models. Includes what... MSRP: Now: $129.06 Out of stock SALE Adige | sku: 1686 Vespa / Kinetic Non Variating Performance Clutch by Adige Italian made Adige performance clutch innards for Single speed non-variating version models. Fits inside the stock clutch bell. *Best for tuning projects up to 43mm cylinder size. Try it out, let us know. Fits: Single Speed -... MSRP: Was: $70.07 Now: $40.68 Add to Cart SALE Kinetic OEM | sku: 1667 OEM Kinetic 105mm Rear Drive Pulley for Non-Variated Mopeds - TFR New original 105mm Rear drive pulley for non variated Kinetic models like the TFR, Luna etc. This is the smooth round 11mm hole with a Woodruff keyway version.Grey. Please be sure to compare before purchasing. MSRP: Was: $21.04 Now: $14.01 Add to Cart Kinetic OEM | sku: 1637 Kinetic Moped Starter Weights, Shoes / Pads - Magnum, Luna, Swift Original starter weights for Kinetic mopeds. Installation is based upon the moped. one way for Magnum models, the other for Luna Swift models. No springs, no rubber pads. Kinetic Part # #05029590 Recommended Accessories:Starter Clutch Spring MSRP: Now: $35.07 Add to Cart Kinetic OEM | sku: 1641 Kinetic TFR Magnum RIGHT Pedal Crank Arm, 20mm - Chrome New RIGHT hand side chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though... MSRP: Now: $28.04 Add to Cart Kinetic OEM | sku: 1636 Kinetic TFR Magnum LEFT Pedal Crank Arm, 20mm - Chrome New LEFT chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though some newer... MSRP: Now: $28.04 Add to Cart CIF | sku: 745 CIF Clutch Set for Vespa / Kinetic Non-Variated Mopeds CIF repalcement 3 Piece Clutch Weight, spring and plate set. Made in Italy CIF Part # 5570K Fits: Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, SI Kinetic TFR and similar MSRP: Now: $49.03 Add to Cart DR Racing | sku: 492 Vespa Non-Variated Clutch Weight Set with springs. DR Racing Top quality DR Racing replacement 3 Piece Clutch Weight Set and Reinforced springs for additional acceleration performance, Fits: Non-Variated Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, Gillera, Cita, SI Kinetic TFR (not tfr usa) and... MSRP: Now: $39.28 Add to Cart Previous 1 2 Previous 1 2 Compare Selected × OK
Kinetic OEM | sku: 1636 Kinetic TFR Magnum LEFT Pedal Crank Arm, 20mm - Chrome MSRP: Now: $28.04 Add to Cart CIF | sku: 745 CIF Clutch Set for Vespa / Kinetic Non-Variated Mopeds MSRP: Now: $49.03 Add to Cart DR Racing | sku: 492 Vespa Non-Variated Clutch Weight Set with springs. DR Racing MSRP: Now: $39.28 Add to Cart Kinetic OEM | sku: KI-1789 Original Kinetic Non Variating Clutch Plate - TFR / Vespa Piaggio Original Kinetic Clutch plate for non variating mopeds. Will also fit Vespa Piaggio non variating mopeds. Intended for the old style Luna / TFR mopeds with > This Style Clutch < and > Shoes <*Be sure to compare before purchasing. Kinetic #... MSRP: Now: $11.21 Out of stock Ventico | sku: 1778 Vespa Piaggio Ciao 10mm x 950mm Ribbed Drive Belt for 80mm Pulley - Non Variated Ventico 10mm x 950mm drive belt for non variated Vespa Piaggio Ciao mopeds and some model TFR mopeds. For use on 80mm Pulleys.*May fit 95mm pulley but it will be a very tight fit. 10mm W x 8mm H x 950mm L MSRP: Now: $18.22 Add to Cart Kinetic OEM | sku: 1777 Original Kinetic One Speed Clutch Assembly, No Bell - TFR Original non variating Kinetic clutch assembly for single speed TFR / luna mopeds. Includes clutch plate, shoes, and springs. The clutch plate is D shaped on one side and circular on the other just like non variating Vespa Piaggio mopeds. *Be... MSRP: Now: $61.72 Out of stock SALE Kinetic OEM | sku: 1776 OEM Kinetic 95mm Rear Drive Pulley for Non-Variated Mopeds - TFR New original 95mm Rear drive pulley for non variated Kinetic models like the TFR, Luna etc. This is the smooth round 11mm hole with a Woodruff keyway version.Black. Please be sure to compare before purchasing. MSRP: Was: $21.04 Now: $14.01 Add to Cart Polini | sku: 1775 Polini Clutch Spring sets, 3 Tensions - Vespa & Kinetic New Polini clutch springs for non variated Vespa Piaggio mopeds and non variated TFR mopeds. (3)metal = stiff, (3)green = stiffer, (3)blue = Stiffest. *You must compare before purchasing, these can only be used for Vespa Piaggio mopeds or the... MSRP: Now: $44.89 Out of stock Kinetic OEM | sku: 1774 Original Kinetic Clutch Pad / Weight / Bushing - TFR USA Version New original Kinetic one speed TFR USA / Luna Double / Plus Super clutch pad / weight / bushing. This slides over the pins on your kinetic # 13304360 support plate. Works with > SKU 1687 complete clutch <*You only receive one. Specifications:10... MSRP: Now: $5.60 Out of stock Kinetic OEM | sku: 1773 Original Kinetic One Speed Clutch Shoe Set - TFR USA Version new OEM Kinetic Clutch shoe set (3 pads / shoes). These are for the TFR USA or Luna Double plus / Super version mopeds. *You must compare before purchasing, the older(1990s) TFR mopeds used the > Vespa style pads. <Kinetic # 13229270 and 06029600 MSRP: Now: $49.10 Add to Cart Kinetic OEM | sku: 1757 Original Kinetic Moped Pedal Crank Spindle Bushing - Each OEM Kinetic metal pedal crank arm bushing for the larger pedal cranks arms found on the TFR, Magnum and Luna. Does not fit the 16mm TFR USA type. You need one for each side of the pedal crank. Dimensions:20mm Inner Diameter26mm Outer Diameter31mm... MSRP: Now: $5.60 Add to Cart Kinetic OEM | sku: 1739 Kinetic Moped Starter Weights, Shoes / Pads - Non variated, TFR Original starter weights for Non-variated TFR Kinetic mopeds. *Be sure to compare before purchasing. Kinetic Part #03029450 Upgraded version available > here <Recommended Accessories:Starter Clutch SpringStarter Weight Retainer MSRP: Now: $35.07 Out of stock Kinetic OEM | sku: 1687 Original Kinetic TFR Moped Single Speed Clutch - 13227680 Original Kinetic TFR moped single speed clutch. Please please please compare before purchasing or send in pictures of your moped if not sure this is for you. May also fit the Piaggio Vespa Ciao.Single speeds only, not Variated models. Includes what... MSRP: Now: $129.06 Out of stock SALE Adige | sku: 1686 Vespa / Kinetic Non Variating Performance Clutch by Adige Italian made Adige performance clutch innards for Single speed non-variating version models. Fits inside the stock clutch bell. *Best for tuning projects up to 43mm cylinder size. Try it out, let us know. Fits: Single Speed -... MSRP: Was: $70.07 Now: $40.68 Add to Cart SALE Kinetic OEM | sku: 1667 OEM Kinetic 105mm Rear Drive Pulley for Non-Variated Mopeds - TFR New original 105mm Rear drive pulley for non variated Kinetic models like the TFR, Luna etc. This is the smooth round 11mm hole with a Woodruff keyway version.Grey. Please be sure to compare before purchasing. MSRP: Was: $21.04 Now: $14.01 Add to Cart Kinetic OEM | sku: 1637 Kinetic Moped Starter Weights, Shoes / Pads - Magnum, Luna, Swift Original starter weights for Kinetic mopeds. Installation is based upon the moped. one way for Magnum models, the other for Luna Swift models. No springs, no rubber pads. Kinetic Part # #05029590 Recommended Accessories:Starter Clutch Spring MSRP: Now: $35.07 Add to Cart Kinetic OEM | sku: 1641 Kinetic TFR Magnum RIGHT Pedal Crank Arm, 20mm - Chrome New RIGHT hand side chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though... MSRP: Now: $28.04 Add to Cart Kinetic OEM | sku: 1636 Kinetic TFR Magnum LEFT Pedal Crank Arm, 20mm - Chrome New LEFT chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though some newer... MSRP: Now: $28.04 Add to Cart CIF | sku: 745 CIF Clutch Set for Vespa / Kinetic Non-Variated Mopeds CIF repalcement 3 Piece Clutch Weight, spring and plate set. Made in Italy CIF Part # 5570K Fits: Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, SI Kinetic TFR and similar MSRP: Now: $49.03 Add to Cart DR Racing | sku: 492 Vespa Non-Variated Clutch Weight Set with springs. DR Racing Top quality DR Racing replacement 3 Piece Clutch Weight Set and Reinforced springs for additional acceleration performance, Fits: Non-Variated Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, Gillera, Cita, SI Kinetic TFR (not tfr usa) and... MSRP: Now: $39.28 Add to Cart Previous 1 2 Previous 1 2 Compare Selected × OK
CIF | sku: 745 CIF Clutch Set for Vespa / Kinetic Non-Variated Mopeds MSRP: Now: $49.03 Add to Cart DR Racing | sku: 492 Vespa Non-Variated Clutch Weight Set with springs. DR Racing MSRP: Now: $39.28 Add to Cart Kinetic OEM | sku: KI-1789 Original Kinetic Non Variating Clutch Plate - TFR / Vespa Piaggio Original Kinetic Clutch plate for non variating mopeds. Will also fit Vespa Piaggio non variating mopeds. Intended for the old style Luna / TFR mopeds with > This Style Clutch < and > Shoes <*Be sure to compare before purchasing. Kinetic #... MSRP: Now: $11.21 Out of stock Ventico | sku: 1778 Vespa Piaggio Ciao 10mm x 950mm Ribbed Drive Belt for 80mm Pulley - Non Variated Ventico 10mm x 950mm drive belt for non variated Vespa Piaggio Ciao mopeds and some model TFR mopeds. For use on 80mm Pulleys.*May fit 95mm pulley but it will be a very tight fit. 10mm W x 8mm H x 950mm L MSRP: Now: $18.22 Add to Cart Kinetic OEM | sku: 1777 Original Kinetic One Speed Clutch Assembly, No Bell - TFR Original non variating Kinetic clutch assembly for single speed TFR / luna mopeds. Includes clutch plate, shoes, and springs. The clutch plate is D shaped on one side and circular on the other just like non variating Vespa Piaggio mopeds. *Be... MSRP: Now: $61.72 Out of stock SALE Kinetic OEM | sku: 1776 OEM Kinetic 95mm Rear Drive Pulley for Non-Variated Mopeds - TFR New original 95mm Rear drive pulley for non variated Kinetic models like the TFR, Luna etc. This is the smooth round 11mm hole with a Woodruff keyway version.Black. Please be sure to compare before purchasing. MSRP: Was: $21.04 Now: $14.01 Add to Cart Polini | sku: 1775 Polini Clutch Spring sets, 3 Tensions - Vespa & Kinetic New Polini clutch springs for non variated Vespa Piaggio mopeds and non variated TFR mopeds. (3)metal = stiff, (3)green = stiffer, (3)blue = Stiffest. *You must compare before purchasing, these can only be used for Vespa Piaggio mopeds or the... MSRP: Now: $44.89 Out of stock Kinetic OEM | sku: 1774 Original Kinetic Clutch Pad / Weight / Bushing - TFR USA Version New original Kinetic one speed TFR USA / Luna Double / Plus Super clutch pad / weight / bushing. This slides over the pins on your kinetic # 13304360 support plate. Works with > SKU 1687 complete clutch <*You only receive one. Specifications:10... MSRP: Now: $5.60 Out of stock Kinetic OEM | sku: 1773 Original Kinetic One Speed Clutch Shoe Set - TFR USA Version new OEM Kinetic Clutch shoe set (3 pads / shoes). These are for the TFR USA or Luna Double plus / Super version mopeds. *You must compare before purchasing, the older(1990s) TFR mopeds used the > Vespa style pads. <Kinetic # 13229270 and 06029600 MSRP: Now: $49.10 Add to Cart Kinetic OEM | sku: 1757 Original Kinetic Moped Pedal Crank Spindle Bushing - Each OEM Kinetic metal pedal crank arm bushing for the larger pedal cranks arms found on the TFR, Magnum and Luna. Does not fit the 16mm TFR USA type. You need one for each side of the pedal crank. Dimensions:20mm Inner Diameter26mm Outer Diameter31mm... MSRP: Now: $5.60 Add to Cart Kinetic OEM | sku: 1739 Kinetic Moped Starter Weights, Shoes / Pads - Non variated, TFR Original starter weights for Non-variated TFR Kinetic mopeds. *Be sure to compare before purchasing. Kinetic Part #03029450 Upgraded version available > here <Recommended Accessories:Starter Clutch SpringStarter Weight Retainer MSRP: Now: $35.07 Out of stock Kinetic OEM | sku: 1687 Original Kinetic TFR Moped Single Speed Clutch - 13227680 Original Kinetic TFR moped single speed clutch. Please please please compare before purchasing or send in pictures of your moped if not sure this is for you. May also fit the Piaggio Vespa Ciao.Single speeds only, not Variated models. Includes what... MSRP: Now: $129.06 Out of stock SALE Adige | sku: 1686 Vespa / Kinetic Non Variating Performance Clutch by Adige Italian made Adige performance clutch innards for Single speed non-variating version models. Fits inside the stock clutch bell. *Best for tuning projects up to 43mm cylinder size. Try it out, let us know. Fits: Single Speed -... MSRP: Was: $70.07 Now: $40.68 Add to Cart SALE Kinetic OEM | sku: 1667 OEM Kinetic 105mm Rear Drive Pulley for Non-Variated Mopeds - TFR New original 105mm Rear drive pulley for non variated Kinetic models like the TFR, Luna etc. This is the smooth round 11mm hole with a Woodruff keyway version.Grey. Please be sure to compare before purchasing. MSRP: Was: $21.04 Now: $14.01 Add to Cart Kinetic OEM | sku: 1637 Kinetic Moped Starter Weights, Shoes / Pads - Magnum, Luna, Swift Original starter weights for Kinetic mopeds. Installation is based upon the moped. one way for Magnum models, the other for Luna Swift models. No springs, no rubber pads. Kinetic Part # #05029590 Recommended Accessories:Starter Clutch Spring MSRP: Now: $35.07 Add to Cart Kinetic OEM | sku: 1641 Kinetic TFR Magnum RIGHT Pedal Crank Arm, 20mm - Chrome New RIGHT hand side chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though... MSRP: Now: $28.04 Add to Cart Kinetic OEM | sku: 1636 Kinetic TFR Magnum LEFT Pedal Crank Arm, 20mm - Chrome New LEFT chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though some newer... MSRP: Now: $28.04 Add to Cart CIF | sku: 745 CIF Clutch Set for Vespa / Kinetic Non-Variated Mopeds CIF repalcement 3 Piece Clutch Weight, spring and plate set. Made in Italy CIF Part # 5570K Fits: Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, SI Kinetic TFR and similar MSRP: Now: $49.03 Add to Cart DR Racing | sku: 492 Vespa Non-Variated Clutch Weight Set with springs. DR Racing Top quality DR Racing replacement 3 Piece Clutch Weight Set and Reinforced springs for additional acceleration performance, Fits: Non-Variated Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, Gillera, Cita, SI Kinetic TFR (not tfr usa) and... MSRP: Now: $39.28 Add to Cart Previous 1 2 Previous 1 2 Compare Selected × OK
DR Racing | sku: 492 Vespa Non-Variated Clutch Weight Set with springs. DR Racing MSRP: Now: $39.28 Add to Cart Kinetic OEM | sku: KI-1789 Original Kinetic Non Variating Clutch Plate - TFR / Vespa Piaggio Original Kinetic Clutch plate for non variating mopeds. Will also fit Vespa Piaggio non variating mopeds. Intended for the old style Luna / TFR mopeds with > This Style Clutch < and > Shoes <*Be sure to compare before purchasing. Kinetic #... MSRP: Now: $11.21 Out of stock Ventico | sku: 1778 Vespa Piaggio Ciao 10mm x 950mm Ribbed Drive Belt for 80mm Pulley - Non Variated Ventico 10mm x 950mm drive belt for non variated Vespa Piaggio Ciao mopeds and some model TFR mopeds. For use on 80mm Pulleys.*May fit 95mm pulley but it will be a very tight fit. 10mm W x 8mm H x 950mm L MSRP: Now: $18.22 Add to Cart Kinetic OEM | sku: 1777 Original Kinetic One Speed Clutch Assembly, No Bell - TFR Original non variating Kinetic clutch assembly for single speed TFR / luna mopeds. Includes clutch plate, shoes, and springs. The clutch plate is D shaped on one side and circular on the other just like non variating Vespa Piaggio mopeds. *Be... MSRP: Now: $61.72 Out of stock SALE Kinetic OEM | sku: 1776 OEM Kinetic 95mm Rear Drive Pulley for Non-Variated Mopeds - TFR New original 95mm Rear drive pulley for non variated Kinetic models like the TFR, Luna etc. This is the smooth round 11mm hole with a Woodruff keyway version.Black. Please be sure to compare before purchasing. MSRP: Was: $21.04 Now: $14.01 Add to Cart Polini | sku: 1775 Polini Clutch Spring sets, 3 Tensions - Vespa & Kinetic New Polini clutch springs for non variated Vespa Piaggio mopeds and non variated TFR mopeds. (3)metal = stiff, (3)green = stiffer, (3)blue = Stiffest. *You must compare before purchasing, these can only be used for Vespa Piaggio mopeds or the... MSRP: Now: $44.89 Out of stock Kinetic OEM | sku: 1774 Original Kinetic Clutch Pad / Weight / Bushing - TFR USA Version New original Kinetic one speed TFR USA / Luna Double / Plus Super clutch pad / weight / bushing. This slides over the pins on your kinetic # 13304360 support plate. Works with > SKU 1687 complete clutch <*You only receive one. Specifications:10... MSRP: Now: $5.60 Out of stock Kinetic OEM | sku: 1773 Original Kinetic One Speed Clutch Shoe Set - TFR USA Version new OEM Kinetic Clutch shoe set (3 pads / shoes). These are for the TFR USA or Luna Double plus / Super version mopeds. *You must compare before purchasing, the older(1990s) TFR mopeds used the > Vespa style pads. <Kinetic # 13229270 and 06029600 MSRP: Now: $49.10 Add to Cart Kinetic OEM | sku: 1757 Original Kinetic Moped Pedal Crank Spindle Bushing - Each OEM Kinetic metal pedal crank arm bushing for the larger pedal cranks arms found on the TFR, Magnum and Luna. Does not fit the 16mm TFR USA type. You need one for each side of the pedal crank. Dimensions:20mm Inner Diameter26mm Outer Diameter31mm... MSRP: Now: $5.60 Add to Cart Kinetic OEM | sku: 1739 Kinetic Moped Starter Weights, Shoes / Pads - Non variated, TFR Original starter weights for Non-variated TFR Kinetic mopeds. *Be sure to compare before purchasing. Kinetic Part #03029450 Upgraded version available > here <Recommended Accessories:Starter Clutch SpringStarter Weight Retainer MSRP: Now: $35.07 Out of stock Kinetic OEM | sku: 1687 Original Kinetic TFR Moped Single Speed Clutch - 13227680 Original Kinetic TFR moped single speed clutch. Please please please compare before purchasing or send in pictures of your moped if not sure this is for you. May also fit the Piaggio Vespa Ciao.Single speeds only, not Variated models. Includes what... MSRP: Now: $129.06 Out of stock SALE Adige | sku: 1686 Vespa / Kinetic Non Variating Performance Clutch by Adige Italian made Adige performance clutch innards for Single speed non-variating version models. Fits inside the stock clutch bell. *Best for tuning projects up to 43mm cylinder size. Try it out, let us know. Fits: Single Speed -... MSRP: Was: $70.07 Now: $40.68 Add to Cart SALE Kinetic OEM | sku: 1667 OEM Kinetic 105mm Rear Drive Pulley for Non-Variated Mopeds - TFR New original 105mm Rear drive pulley for non variated Kinetic models like the TFR, Luna etc. This is the smooth round 11mm hole with a Woodruff keyway version.Grey. Please be sure to compare before purchasing. MSRP: Was: $21.04 Now: $14.01 Add to Cart Kinetic OEM | sku: 1637 Kinetic Moped Starter Weights, Shoes / Pads - Magnum, Luna, Swift Original starter weights for Kinetic mopeds. Installation is based upon the moped. one way for Magnum models, the other for Luna Swift models. No springs, no rubber pads. Kinetic Part # #05029590 Recommended Accessories:Starter Clutch Spring MSRP: Now: $35.07 Add to Cart Kinetic OEM | sku: 1641 Kinetic TFR Magnum RIGHT Pedal Crank Arm, 20mm - Chrome New RIGHT hand side chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though... MSRP: Now: $28.04 Add to Cart Kinetic OEM | sku: 1636 Kinetic TFR Magnum LEFT Pedal Crank Arm, 20mm - Chrome New LEFT chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though some newer... MSRP: Now: $28.04 Add to Cart CIF | sku: 745 CIF Clutch Set for Vespa / Kinetic Non-Variated Mopeds CIF repalcement 3 Piece Clutch Weight, spring and plate set. Made in Italy CIF Part # 5570K Fits: Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, SI Kinetic TFR and similar MSRP: Now: $49.03 Add to Cart DR Racing | sku: 492 Vespa Non-Variated Clutch Weight Set with springs. DR Racing Top quality DR Racing replacement 3 Piece Clutch Weight Set and Reinforced springs for additional acceleration performance, Fits: Non-Variated Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, Gillera, Cita, SI Kinetic TFR (not tfr usa) and... MSRP: Now: $39.28 Add to Cart Previous 1 2 Previous 1 2 Compare Selected × OK
Kinetic OEM | sku: KI-1789 Original Kinetic Non Variating Clutch Plate - TFR / Vespa Piaggio Original Kinetic Clutch plate for non variating mopeds. Will also fit Vespa Piaggio non variating mopeds. Intended for the old style Luna / TFR mopeds with > This Style Clutch < and > Shoes <*Be sure to compare before purchasing. Kinetic #... MSRP: Now: $11.21 Out of stock Ventico | sku: 1778 Vespa Piaggio Ciao 10mm x 950mm Ribbed Drive Belt for 80mm Pulley - Non Variated Ventico 10mm x 950mm drive belt for non variated Vespa Piaggio Ciao mopeds and some model TFR mopeds. For use on 80mm Pulleys.*May fit 95mm pulley but it will be a very tight fit. 10mm W x 8mm H x 950mm L MSRP: Now: $18.22 Add to Cart Kinetic OEM | sku: 1777 Original Kinetic One Speed Clutch Assembly, No Bell - TFR Original non variating Kinetic clutch assembly for single speed TFR / luna mopeds. Includes clutch plate, shoes, and springs. The clutch plate is D shaped on one side and circular on the other just like non variating Vespa Piaggio mopeds. *Be... MSRP: Now: $61.72 Out of stock SALE Kinetic OEM | sku: 1776 OEM Kinetic 95mm Rear Drive Pulley for Non-Variated Mopeds - TFR New original 95mm Rear drive pulley for non variated Kinetic models like the TFR, Luna etc. This is the smooth round 11mm hole with a Woodruff keyway version.Black. Please be sure to compare before purchasing. MSRP: Was: $21.04 Now: $14.01 Add to Cart Polini | sku: 1775 Polini Clutch Spring sets, 3 Tensions - Vespa & Kinetic New Polini clutch springs for non variated Vespa Piaggio mopeds and non variated TFR mopeds. (3)metal = stiff, (3)green = stiffer, (3)blue = Stiffest. *You must compare before purchasing, these can only be used for Vespa Piaggio mopeds or the... MSRP: Now: $44.89 Out of stock Kinetic OEM | sku: 1774 Original Kinetic Clutch Pad / Weight / Bushing - TFR USA Version New original Kinetic one speed TFR USA / Luna Double / Plus Super clutch pad / weight / bushing. This slides over the pins on your kinetic # 13304360 support plate. Works with > SKU 1687 complete clutch <*You only receive one. Specifications:10... MSRP: Now: $5.60 Out of stock Kinetic OEM | sku: 1773 Original Kinetic One Speed Clutch Shoe Set - TFR USA Version new OEM Kinetic Clutch shoe set (3 pads / shoes). These are for the TFR USA or Luna Double plus / Super version mopeds. *You must compare before purchasing, the older(1990s) TFR mopeds used the > Vespa style pads. <Kinetic # 13229270 and 06029600 MSRP: Now: $49.10 Add to Cart Kinetic OEM | sku: 1757 Original Kinetic Moped Pedal Crank Spindle Bushing - Each OEM Kinetic metal pedal crank arm bushing for the larger pedal cranks arms found on the TFR, Magnum and Luna. Does not fit the 16mm TFR USA type. You need one for each side of the pedal crank. Dimensions:20mm Inner Diameter26mm Outer Diameter31mm... MSRP: Now: $5.60 Add to Cart Kinetic OEM | sku: 1739 Kinetic Moped Starter Weights, Shoes / Pads - Non variated, TFR Original starter weights for Non-variated TFR Kinetic mopeds. *Be sure to compare before purchasing. Kinetic Part #03029450 Upgraded version available > here <Recommended Accessories:Starter Clutch SpringStarter Weight Retainer MSRP: Now: $35.07 Out of stock Kinetic OEM | sku: 1687 Original Kinetic TFR Moped Single Speed Clutch - 13227680 Original Kinetic TFR moped single speed clutch. Please please please compare before purchasing or send in pictures of your moped if not sure this is for you. May also fit the Piaggio Vespa Ciao.Single speeds only, not Variated models. Includes what... MSRP: Now: $129.06 Out of stock SALE Adige | sku: 1686 Vespa / Kinetic Non Variating Performance Clutch by Adige Italian made Adige performance clutch innards for Single speed non-variating version models. Fits inside the stock clutch bell. *Best for tuning projects up to 43mm cylinder size. Try it out, let us know. Fits: Single Speed -... MSRP: Was: $70.07 Now: $40.68 Add to Cart SALE Kinetic OEM | sku: 1667 OEM Kinetic 105mm Rear Drive Pulley for Non-Variated Mopeds - TFR New original 105mm Rear drive pulley for non variated Kinetic models like the TFR, Luna etc. This is the smooth round 11mm hole with a Woodruff keyway version.Grey. Please be sure to compare before purchasing. MSRP: Was: $21.04 Now: $14.01 Add to Cart Kinetic OEM | sku: 1637 Kinetic Moped Starter Weights, Shoes / Pads - Magnum, Luna, Swift Original starter weights for Kinetic mopeds. Installation is based upon the moped. one way for Magnum models, the other for Luna Swift models. No springs, no rubber pads. Kinetic Part # #05029590 Recommended Accessories:Starter Clutch Spring MSRP: Now: $35.07 Add to Cart Kinetic OEM | sku: 1641 Kinetic TFR Magnum RIGHT Pedal Crank Arm, 20mm - Chrome New RIGHT hand side chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though... MSRP: Now: $28.04 Add to Cart Kinetic OEM | sku: 1636 Kinetic TFR Magnum LEFT Pedal Crank Arm, 20mm - Chrome New LEFT chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though some newer... MSRP: Now: $28.04 Add to Cart CIF | sku: 745 CIF Clutch Set for Vespa / Kinetic Non-Variated Mopeds CIF repalcement 3 Piece Clutch Weight, spring and plate set. Made in Italy CIF Part # 5570K Fits: Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, SI Kinetic TFR and similar MSRP: Now: $49.03 Add to Cart DR Racing | sku: 492 Vespa Non-Variated Clutch Weight Set with springs. DR Racing Top quality DR Racing replacement 3 Piece Clutch Weight Set and Reinforced springs for additional acceleration performance, Fits: Non-Variated Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, Gillera, Cita, SI Kinetic TFR (not tfr usa) and... MSRP: Now: $39.28 Add to Cart Previous 1 2 Previous 1 2 Compare Selected × OK
Ventico | sku: 1778 Vespa Piaggio Ciao 10mm x 950mm Ribbed Drive Belt for 80mm Pulley - Non Variated Ventico 10mm x 950mm drive belt for non variated Vespa Piaggio Ciao mopeds and some model TFR mopeds. For use on 80mm Pulleys.*May fit 95mm pulley but it will be a very tight fit. 10mm W x 8mm H x 950mm L MSRP: Now: $18.22 Add to Cart Kinetic OEM | sku: 1777 Original Kinetic One Speed Clutch Assembly, No Bell - TFR Original non variating Kinetic clutch assembly for single speed TFR / luna mopeds. Includes clutch plate, shoes, and springs. The clutch plate is D shaped on one side and circular on the other just like non variating Vespa Piaggio mopeds. *Be... MSRP: Now: $61.72 Out of stock SALE Kinetic OEM | sku: 1776 OEM Kinetic 95mm Rear Drive Pulley for Non-Variated Mopeds - TFR New original 95mm Rear drive pulley for non variated Kinetic models like the TFR, Luna etc. This is the smooth round 11mm hole with a Woodruff keyway version.Black. Please be sure to compare before purchasing. MSRP: Was: $21.04 Now: $14.01 Add to Cart Polini | sku: 1775 Polini Clutch Spring sets, 3 Tensions - Vespa & Kinetic New Polini clutch springs for non variated Vespa Piaggio mopeds and non variated TFR mopeds. (3)metal = stiff, (3)green = stiffer, (3)blue = Stiffest. *You must compare before purchasing, these can only be used for Vespa Piaggio mopeds or the... MSRP: Now: $44.89 Out of stock Kinetic OEM | sku: 1774 Original Kinetic Clutch Pad / Weight / Bushing - TFR USA Version New original Kinetic one speed TFR USA / Luna Double / Plus Super clutch pad / weight / bushing. This slides over the pins on your kinetic # 13304360 support plate. Works with > SKU 1687 complete clutch <*You only receive one. Specifications:10... MSRP: Now: $5.60 Out of stock Kinetic OEM | sku: 1773 Original Kinetic One Speed Clutch Shoe Set - TFR USA Version new OEM Kinetic Clutch shoe set (3 pads / shoes). These are for the TFR USA or Luna Double plus / Super version mopeds. *You must compare before purchasing, the older(1990s) TFR mopeds used the > Vespa style pads. <Kinetic # 13229270 and 06029600 MSRP: Now: $49.10 Add to Cart Kinetic OEM | sku: 1757 Original Kinetic Moped Pedal Crank Spindle Bushing - Each OEM Kinetic metal pedal crank arm bushing for the larger pedal cranks arms found on the TFR, Magnum and Luna. Does not fit the 16mm TFR USA type. You need one for each side of the pedal crank. Dimensions:20mm Inner Diameter26mm Outer Diameter31mm... MSRP: Now: $5.60 Add to Cart Kinetic OEM | sku: 1739 Kinetic Moped Starter Weights, Shoes / Pads - Non variated, TFR Original starter weights for Non-variated TFR Kinetic mopeds. *Be sure to compare before purchasing. Kinetic Part #03029450 Upgraded version available > here <Recommended Accessories:Starter Clutch SpringStarter Weight Retainer MSRP: Now: $35.07 Out of stock Kinetic OEM | sku: 1687 Original Kinetic TFR Moped Single Speed Clutch - 13227680 Original Kinetic TFR moped single speed clutch. Please please please compare before purchasing or send in pictures of your moped if not sure this is for you. May also fit the Piaggio Vespa Ciao.Single speeds only, not Variated models. Includes what... MSRP: Now: $129.06 Out of stock SALE Adige | sku: 1686 Vespa / Kinetic Non Variating Performance Clutch by Adige Italian made Adige performance clutch innards for Single speed non-variating version models. Fits inside the stock clutch bell. *Best for tuning projects up to 43mm cylinder size. Try it out, let us know. Fits: Single Speed -... MSRP: Was: $70.07 Now: $40.68 Add to Cart SALE Kinetic OEM | sku: 1667 OEM Kinetic 105mm Rear Drive Pulley for Non-Variated Mopeds - TFR New original 105mm Rear drive pulley for non variated Kinetic models like the TFR, Luna etc. This is the smooth round 11mm hole with a Woodruff keyway version.Grey. Please be sure to compare before purchasing. MSRP: Was: $21.04 Now: $14.01 Add to Cart Kinetic OEM | sku: 1637 Kinetic Moped Starter Weights, Shoes / Pads - Magnum, Luna, Swift Original starter weights for Kinetic mopeds. Installation is based upon the moped. one way for Magnum models, the other for Luna Swift models. No springs, no rubber pads. Kinetic Part # #05029590 Recommended Accessories:Starter Clutch Spring MSRP: Now: $35.07 Add to Cart Kinetic OEM | sku: 1641 Kinetic TFR Magnum RIGHT Pedal Crank Arm, 20mm - Chrome New RIGHT hand side chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though... MSRP: Now: $28.04 Add to Cart Kinetic OEM | sku: 1636 Kinetic TFR Magnum LEFT Pedal Crank Arm, 20mm - Chrome New LEFT chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though some newer... MSRP: Now: $28.04 Add to Cart CIF | sku: 745 CIF Clutch Set for Vespa / Kinetic Non-Variated Mopeds CIF repalcement 3 Piece Clutch Weight, spring and plate set. Made in Italy CIF Part # 5570K Fits: Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, SI Kinetic TFR and similar MSRP: Now: $49.03 Add to Cart DR Racing | sku: 492 Vespa Non-Variated Clutch Weight Set with springs. DR Racing Top quality DR Racing replacement 3 Piece Clutch Weight Set and Reinforced springs for additional acceleration performance, Fits: Non-Variated Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, Gillera, Cita, SI Kinetic TFR (not tfr usa) and... MSRP: Now: $39.28 Add to Cart Previous 1 2 Previous 1 2 Compare Selected × OK
Kinetic OEM | sku: 1777 Original Kinetic One Speed Clutch Assembly, No Bell - TFR Original non variating Kinetic clutch assembly for single speed TFR / luna mopeds. Includes clutch plate, shoes, and springs. The clutch plate is D shaped on one side and circular on the other just like non variating Vespa Piaggio mopeds. *Be... MSRP: Now: $61.72 Out of stock SALE Kinetic OEM | sku: 1776 OEM Kinetic 95mm Rear Drive Pulley for Non-Variated Mopeds - TFR New original 95mm Rear drive pulley for non variated Kinetic models like the TFR, Luna etc. This is the smooth round 11mm hole with a Woodruff keyway version.Black. Please be sure to compare before purchasing. MSRP: Was: $21.04 Now: $14.01 Add to Cart Polini | sku: 1775 Polini Clutch Spring sets, 3 Tensions - Vespa & Kinetic New Polini clutch springs for non variated Vespa Piaggio mopeds and non variated TFR mopeds. (3)metal = stiff, (3)green = stiffer, (3)blue = Stiffest. *You must compare before purchasing, these can only be used for Vespa Piaggio mopeds or the... MSRP: Now: $44.89 Out of stock Kinetic OEM | sku: 1774 Original Kinetic Clutch Pad / Weight / Bushing - TFR USA Version New original Kinetic one speed TFR USA / Luna Double / Plus Super clutch pad / weight / bushing. This slides over the pins on your kinetic # 13304360 support plate. Works with > SKU 1687 complete clutch <*You only receive one. Specifications:10... MSRP: Now: $5.60 Out of stock Kinetic OEM | sku: 1773 Original Kinetic One Speed Clutch Shoe Set - TFR USA Version new OEM Kinetic Clutch shoe set (3 pads / shoes). These are for the TFR USA or Luna Double plus / Super version mopeds. *You must compare before purchasing, the older(1990s) TFR mopeds used the > Vespa style pads. <Kinetic # 13229270 and 06029600 MSRP: Now: $49.10 Add to Cart Kinetic OEM | sku: 1757 Original Kinetic Moped Pedal Crank Spindle Bushing - Each OEM Kinetic metal pedal crank arm bushing for the larger pedal cranks arms found on the TFR, Magnum and Luna. Does not fit the 16mm TFR USA type. You need one for each side of the pedal crank. Dimensions:20mm Inner Diameter26mm Outer Diameter31mm... MSRP: Now: $5.60 Add to Cart Kinetic OEM | sku: 1739 Kinetic Moped Starter Weights, Shoes / Pads - Non variated, TFR Original starter weights for Non-variated TFR Kinetic mopeds. *Be sure to compare before purchasing. Kinetic Part #03029450 Upgraded version available > here <Recommended Accessories:Starter Clutch SpringStarter Weight Retainer MSRP: Now: $35.07 Out of stock Kinetic OEM | sku: 1687 Original Kinetic TFR Moped Single Speed Clutch - 13227680 Original Kinetic TFR moped single speed clutch. Please please please compare before purchasing or send in pictures of your moped if not sure this is for you. May also fit the Piaggio Vespa Ciao.Single speeds only, not Variated models. Includes what... MSRP: Now: $129.06 Out of stock SALE Adige | sku: 1686 Vespa / Kinetic Non Variating Performance Clutch by Adige Italian made Adige performance clutch innards for Single speed non-variating version models. Fits inside the stock clutch bell. *Best for tuning projects up to 43mm cylinder size. Try it out, let us know. Fits: Single Speed -... MSRP: Was: $70.07 Now: $40.68 Add to Cart SALE Kinetic OEM | sku: 1667 OEM Kinetic 105mm Rear Drive Pulley for Non-Variated Mopeds - TFR New original 105mm Rear drive pulley for non variated Kinetic models like the TFR, Luna etc. This is the smooth round 11mm hole with a Woodruff keyway version.Grey. Please be sure to compare before purchasing. MSRP: Was: $21.04 Now: $14.01 Add to Cart Kinetic OEM | sku: 1637 Kinetic Moped Starter Weights, Shoes / Pads - Magnum, Luna, Swift Original starter weights for Kinetic mopeds. Installation is based upon the moped. one way for Magnum models, the other for Luna Swift models. No springs, no rubber pads. Kinetic Part # #05029590 Recommended Accessories:Starter Clutch Spring MSRP: Now: $35.07 Add to Cart Kinetic OEM | sku: 1641 Kinetic TFR Magnum RIGHT Pedal Crank Arm, 20mm - Chrome New RIGHT hand side chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though... MSRP: Now: $28.04 Add to Cart Kinetic OEM | sku: 1636 Kinetic TFR Magnum LEFT Pedal Crank Arm, 20mm - Chrome New LEFT chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though some newer... MSRP: Now: $28.04 Add to Cart CIF | sku: 745 CIF Clutch Set for Vespa / Kinetic Non-Variated Mopeds CIF repalcement 3 Piece Clutch Weight, spring and plate set. Made in Italy CIF Part # 5570K Fits: Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, SI Kinetic TFR and similar MSRP: Now: $49.03 Add to Cart DR Racing | sku: 492 Vespa Non-Variated Clutch Weight Set with springs. DR Racing Top quality DR Racing replacement 3 Piece Clutch Weight Set and Reinforced springs for additional acceleration performance, Fits: Non-Variated Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, Gillera, Cita, SI Kinetic TFR (not tfr usa) and... MSRP: Now: $39.28 Add to Cart Previous 1 2 Previous 1 2 Compare Selected × OK
SALE Kinetic OEM | sku: 1776 OEM Kinetic 95mm Rear Drive Pulley for Non-Variated Mopeds - TFR New original 95mm Rear drive pulley for non variated Kinetic models like the TFR, Luna etc. This is the smooth round 11mm hole with a Woodruff keyway version.Black. Please be sure to compare before purchasing. MSRP: Was: $21.04 Now: $14.01 Add to Cart
Polini | sku: 1775 Polini Clutch Spring sets, 3 Tensions - Vespa & Kinetic New Polini clutch springs for non variated Vespa Piaggio mopeds and non variated TFR mopeds. (3)metal = stiff, (3)green = stiffer, (3)blue = Stiffest. *You must compare before purchasing, these can only be used for Vespa Piaggio mopeds or the... MSRP: Now: $44.89 Out of stock Kinetic OEM | sku: 1774 Original Kinetic Clutch Pad / Weight / Bushing - TFR USA Version New original Kinetic one speed TFR USA / Luna Double / Plus Super clutch pad / weight / bushing. This slides over the pins on your kinetic # 13304360 support plate. Works with > SKU 1687 complete clutch <*You only receive one. Specifications:10... MSRP: Now: $5.60 Out of stock Kinetic OEM | sku: 1773 Original Kinetic One Speed Clutch Shoe Set - TFR USA Version new OEM Kinetic Clutch shoe set (3 pads / shoes). These are for the TFR USA or Luna Double plus / Super version mopeds. *You must compare before purchasing, the older(1990s) TFR mopeds used the > Vespa style pads. <Kinetic # 13229270 and 06029600 MSRP: Now: $49.10 Add to Cart Kinetic OEM | sku: 1757 Original Kinetic Moped Pedal Crank Spindle Bushing - Each OEM Kinetic metal pedal crank arm bushing for the larger pedal cranks arms found on the TFR, Magnum and Luna. Does not fit the 16mm TFR USA type. You need one for each side of the pedal crank. Dimensions:20mm Inner Diameter26mm Outer Diameter31mm... MSRP: Now: $5.60 Add to Cart Kinetic OEM | sku: 1739 Kinetic Moped Starter Weights, Shoes / Pads - Non variated, TFR Original starter weights for Non-variated TFR Kinetic mopeds. *Be sure to compare before purchasing. Kinetic Part #03029450 Upgraded version available > here <Recommended Accessories:Starter Clutch SpringStarter Weight Retainer MSRP: Now: $35.07 Out of stock Kinetic OEM | sku: 1687 Original Kinetic TFR Moped Single Speed Clutch - 13227680 Original Kinetic TFR moped single speed clutch. Please please please compare before purchasing or send in pictures of your moped if not sure this is for you. May also fit the Piaggio Vespa Ciao.Single speeds only, not Variated models. Includes what... MSRP: Now: $129.06 Out of stock SALE Adige | sku: 1686 Vespa / Kinetic Non Variating Performance Clutch by Adige Italian made Adige performance clutch innards for Single speed non-variating version models. Fits inside the stock clutch bell. *Best for tuning projects up to 43mm cylinder size. Try it out, let us know. Fits: Single Speed -... MSRP: Was: $70.07 Now: $40.68 Add to Cart SALE Kinetic OEM | sku: 1667 OEM Kinetic 105mm Rear Drive Pulley for Non-Variated Mopeds - TFR New original 105mm Rear drive pulley for non variated Kinetic models like the TFR, Luna etc. This is the smooth round 11mm hole with a Woodruff keyway version.Grey. Please be sure to compare before purchasing. MSRP: Was: $21.04 Now: $14.01 Add to Cart Kinetic OEM | sku: 1637 Kinetic Moped Starter Weights, Shoes / Pads - Magnum, Luna, Swift Original starter weights for Kinetic mopeds. Installation is based upon the moped. one way for Magnum models, the other for Luna Swift models. No springs, no rubber pads. Kinetic Part # #05029590 Recommended Accessories:Starter Clutch Spring MSRP: Now: $35.07 Add to Cart Kinetic OEM | sku: 1641 Kinetic TFR Magnum RIGHT Pedal Crank Arm, 20mm - Chrome New RIGHT hand side chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though... MSRP: Now: $28.04 Add to Cart Kinetic OEM | sku: 1636 Kinetic TFR Magnum LEFT Pedal Crank Arm, 20mm - Chrome New LEFT chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though some newer... MSRP: Now: $28.04 Add to Cart CIF | sku: 745 CIF Clutch Set for Vespa / Kinetic Non-Variated Mopeds CIF repalcement 3 Piece Clutch Weight, spring and plate set. Made in Italy CIF Part # 5570K Fits: Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, SI Kinetic TFR and similar MSRP: Now: $49.03 Add to Cart DR Racing | sku: 492 Vespa Non-Variated Clutch Weight Set with springs. DR Racing Top quality DR Racing replacement 3 Piece Clutch Weight Set and Reinforced springs for additional acceleration performance, Fits: Non-Variated Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, Gillera, Cita, SI Kinetic TFR (not tfr usa) and... MSRP: Now: $39.28 Add to Cart Previous 1 2 Previous 1 2 Compare Selected × OK
Kinetic OEM | sku: 1774 Original Kinetic Clutch Pad / Weight / Bushing - TFR USA Version New original Kinetic one speed TFR USA / Luna Double / Plus Super clutch pad / weight / bushing. This slides over the pins on your kinetic # 13304360 support plate. Works with > SKU 1687 complete clutch <*You only receive one. Specifications:10... MSRP: Now: $5.60 Out of stock Kinetic OEM | sku: 1773 Original Kinetic One Speed Clutch Shoe Set - TFR USA Version new OEM Kinetic Clutch shoe set (3 pads / shoes). These are for the TFR USA or Luna Double plus / Super version mopeds. *You must compare before purchasing, the older(1990s) TFR mopeds used the > Vespa style pads. <Kinetic # 13229270 and 06029600 MSRP: Now: $49.10 Add to Cart Kinetic OEM | sku: 1757 Original Kinetic Moped Pedal Crank Spindle Bushing - Each OEM Kinetic metal pedal crank arm bushing for the larger pedal cranks arms found on the TFR, Magnum and Luna. Does not fit the 16mm TFR USA type. You need one for each side of the pedal crank. Dimensions:20mm Inner Diameter26mm Outer Diameter31mm... MSRP: Now: $5.60 Add to Cart Kinetic OEM | sku: 1739 Kinetic Moped Starter Weights, Shoes / Pads - Non variated, TFR Original starter weights for Non-variated TFR Kinetic mopeds. *Be sure to compare before purchasing. Kinetic Part #03029450 Upgraded version available > here <Recommended Accessories:Starter Clutch SpringStarter Weight Retainer MSRP: Now: $35.07 Out of stock Kinetic OEM | sku: 1687 Original Kinetic TFR Moped Single Speed Clutch - 13227680 Original Kinetic TFR moped single speed clutch. Please please please compare before purchasing or send in pictures of your moped if not sure this is for you. May also fit the Piaggio Vespa Ciao.Single speeds only, not Variated models. Includes what... MSRP: Now: $129.06 Out of stock SALE Adige | sku: 1686 Vespa / Kinetic Non Variating Performance Clutch by Adige Italian made Adige performance clutch innards for Single speed non-variating version models. Fits inside the stock clutch bell. *Best for tuning projects up to 43mm cylinder size. Try it out, let us know. Fits: Single Speed -... MSRP: Was: $70.07 Now: $40.68 Add to Cart SALE Kinetic OEM | sku: 1667 OEM Kinetic 105mm Rear Drive Pulley for Non-Variated Mopeds - TFR New original 105mm Rear drive pulley for non variated Kinetic models like the TFR, Luna etc. This is the smooth round 11mm hole with a Woodruff keyway version.Grey. Please be sure to compare before purchasing. MSRP: Was: $21.04 Now: $14.01 Add to Cart Kinetic OEM | sku: 1637 Kinetic Moped Starter Weights, Shoes / Pads - Magnum, Luna, Swift Original starter weights for Kinetic mopeds. Installation is based upon the moped. one way for Magnum models, the other for Luna Swift models. No springs, no rubber pads. Kinetic Part # #05029590 Recommended Accessories:Starter Clutch Spring MSRP: Now: $35.07 Add to Cart Kinetic OEM | sku: 1641 Kinetic TFR Magnum RIGHT Pedal Crank Arm, 20mm - Chrome New RIGHT hand side chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though... MSRP: Now: $28.04 Add to Cart Kinetic OEM | sku: 1636 Kinetic TFR Magnum LEFT Pedal Crank Arm, 20mm - Chrome New LEFT chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though some newer... MSRP: Now: $28.04 Add to Cart CIF | sku: 745 CIF Clutch Set for Vespa / Kinetic Non-Variated Mopeds CIF repalcement 3 Piece Clutch Weight, spring and plate set. Made in Italy CIF Part # 5570K Fits: Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, SI Kinetic TFR and similar MSRP: Now: $49.03 Add to Cart DR Racing | sku: 492 Vespa Non-Variated Clutch Weight Set with springs. DR Racing Top quality DR Racing replacement 3 Piece Clutch Weight Set and Reinforced springs for additional acceleration performance, Fits: Non-Variated Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, Gillera, Cita, SI Kinetic TFR (not tfr usa) and... MSRP: Now: $39.28 Add to Cart Previous 1 2 Previous 1 2 Compare Selected × OK
Kinetic OEM | sku: 1773 Original Kinetic One Speed Clutch Shoe Set - TFR USA Version new OEM Kinetic Clutch shoe set (3 pads / shoes). These are for the TFR USA or Luna Double plus / Super version mopeds. *You must compare before purchasing, the older(1990s) TFR mopeds used the > Vespa style pads. <Kinetic # 13229270 and 06029600 MSRP: Now: $49.10 Add to Cart Kinetic OEM | sku: 1757 Original Kinetic Moped Pedal Crank Spindle Bushing - Each OEM Kinetic metal pedal crank arm bushing for the larger pedal cranks arms found on the TFR, Magnum and Luna. Does not fit the 16mm TFR USA type. You need one for each side of the pedal crank. Dimensions:20mm Inner Diameter26mm Outer Diameter31mm... MSRP: Now: $5.60 Add to Cart Kinetic OEM | sku: 1739 Kinetic Moped Starter Weights, Shoes / Pads - Non variated, TFR Original starter weights for Non-variated TFR Kinetic mopeds. *Be sure to compare before purchasing. Kinetic Part #03029450 Upgraded version available > here <Recommended Accessories:Starter Clutch SpringStarter Weight Retainer MSRP: Now: $35.07 Out of stock Kinetic OEM | sku: 1687 Original Kinetic TFR Moped Single Speed Clutch - 13227680 Original Kinetic TFR moped single speed clutch. Please please please compare before purchasing or send in pictures of your moped if not sure this is for you. May also fit the Piaggio Vespa Ciao.Single speeds only, not Variated models. Includes what... MSRP: Now: $129.06 Out of stock SALE Adige | sku: 1686 Vespa / Kinetic Non Variating Performance Clutch by Adige Italian made Adige performance clutch innards for Single speed non-variating version models. Fits inside the stock clutch bell. *Best for tuning projects up to 43mm cylinder size. Try it out, let us know. Fits: Single Speed -... MSRP: Was: $70.07 Now: $40.68 Add to Cart SALE Kinetic OEM | sku: 1667 OEM Kinetic 105mm Rear Drive Pulley for Non-Variated Mopeds - TFR New original 105mm Rear drive pulley for non variated Kinetic models like the TFR, Luna etc. This is the smooth round 11mm hole with a Woodruff keyway version.Grey. Please be sure to compare before purchasing. MSRP: Was: $21.04 Now: $14.01 Add to Cart Kinetic OEM | sku: 1637 Kinetic Moped Starter Weights, Shoes / Pads - Magnum, Luna, Swift Original starter weights for Kinetic mopeds. Installation is based upon the moped. one way for Magnum models, the other for Luna Swift models. No springs, no rubber pads. Kinetic Part # #05029590 Recommended Accessories:Starter Clutch Spring MSRP: Now: $35.07 Add to Cart Kinetic OEM | sku: 1641 Kinetic TFR Magnum RIGHT Pedal Crank Arm, 20mm - Chrome New RIGHT hand side chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though... MSRP: Now: $28.04 Add to Cart Kinetic OEM | sku: 1636 Kinetic TFR Magnum LEFT Pedal Crank Arm, 20mm - Chrome New LEFT chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though some newer... MSRP: Now: $28.04 Add to Cart CIF | sku: 745 CIF Clutch Set for Vespa / Kinetic Non-Variated Mopeds CIF repalcement 3 Piece Clutch Weight, spring and plate set. Made in Italy CIF Part # 5570K Fits: Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, SI Kinetic TFR and similar MSRP: Now: $49.03 Add to Cart DR Racing | sku: 492 Vespa Non-Variated Clutch Weight Set with springs. DR Racing Top quality DR Racing replacement 3 Piece Clutch Weight Set and Reinforced springs for additional acceleration performance, Fits: Non-Variated Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, Gillera, Cita, SI Kinetic TFR (not tfr usa) and... MSRP: Now: $39.28 Add to Cart Previous 1 2 Previous 1 2 Compare Selected × OK
Kinetic OEM | sku: 1757 Original Kinetic Moped Pedal Crank Spindle Bushing - Each OEM Kinetic metal pedal crank arm bushing for the larger pedal cranks arms found on the TFR, Magnum and Luna. Does not fit the 16mm TFR USA type. You need one for each side of the pedal crank. Dimensions:20mm Inner Diameter26mm Outer Diameter31mm... MSRP: Now: $5.60 Add to Cart Kinetic OEM | sku: 1739 Kinetic Moped Starter Weights, Shoes / Pads - Non variated, TFR Original starter weights for Non-variated TFR Kinetic mopeds. *Be sure to compare before purchasing. Kinetic Part #03029450 Upgraded version available > here <Recommended Accessories:Starter Clutch SpringStarter Weight Retainer MSRP: Now: $35.07 Out of stock Kinetic OEM | sku: 1687 Original Kinetic TFR Moped Single Speed Clutch - 13227680 Original Kinetic TFR moped single speed clutch. Please please please compare before purchasing or send in pictures of your moped if not sure this is for you. May also fit the Piaggio Vespa Ciao.Single speeds only, not Variated models. Includes what... MSRP: Now: $129.06 Out of stock SALE Adige | sku: 1686 Vespa / Kinetic Non Variating Performance Clutch by Adige Italian made Adige performance clutch innards for Single speed non-variating version models. Fits inside the stock clutch bell. *Best for tuning projects up to 43mm cylinder size. Try it out, let us know. Fits: Single Speed -... MSRP: Was: $70.07 Now: $40.68 Add to Cart SALE Kinetic OEM | sku: 1667 OEM Kinetic 105mm Rear Drive Pulley for Non-Variated Mopeds - TFR New original 105mm Rear drive pulley for non variated Kinetic models like the TFR, Luna etc. This is the smooth round 11mm hole with a Woodruff keyway version.Grey. Please be sure to compare before purchasing. MSRP: Was: $21.04 Now: $14.01 Add to Cart Kinetic OEM | sku: 1637 Kinetic Moped Starter Weights, Shoes / Pads - Magnum, Luna, Swift Original starter weights for Kinetic mopeds. Installation is based upon the moped. one way for Magnum models, the other for Luna Swift models. No springs, no rubber pads. Kinetic Part # #05029590 Recommended Accessories:Starter Clutch Spring MSRP: Now: $35.07 Add to Cart Kinetic OEM | sku: 1641 Kinetic TFR Magnum RIGHT Pedal Crank Arm, 20mm - Chrome New RIGHT hand side chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though... MSRP: Now: $28.04 Add to Cart Kinetic OEM | sku: 1636 Kinetic TFR Magnum LEFT Pedal Crank Arm, 20mm - Chrome New LEFT chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though some newer... MSRP: Now: $28.04 Add to Cart CIF | sku: 745 CIF Clutch Set for Vespa / Kinetic Non-Variated Mopeds CIF repalcement 3 Piece Clutch Weight, spring and plate set. Made in Italy CIF Part # 5570K Fits: Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, SI Kinetic TFR and similar MSRP: Now: $49.03 Add to Cart DR Racing | sku: 492 Vespa Non-Variated Clutch Weight Set with springs. DR Racing Top quality DR Racing replacement 3 Piece Clutch Weight Set and Reinforced springs for additional acceleration performance, Fits: Non-Variated Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, Gillera, Cita, SI Kinetic TFR (not tfr usa) and... MSRP: Now: $39.28 Add to Cart Previous 1 2 Previous 1 2 Compare Selected × OK
Kinetic OEM | sku: 1739 Kinetic Moped Starter Weights, Shoes / Pads - Non variated, TFR Original starter weights for Non-variated TFR Kinetic mopeds. *Be sure to compare before purchasing. Kinetic Part #03029450 Upgraded version available > here <Recommended Accessories:Starter Clutch SpringStarter Weight Retainer MSRP: Now: $35.07 Out of stock Kinetic OEM | sku: 1687 Original Kinetic TFR Moped Single Speed Clutch - 13227680 Original Kinetic TFR moped single speed clutch. Please please please compare before purchasing or send in pictures of your moped if not sure this is for you. May also fit the Piaggio Vespa Ciao.Single speeds only, not Variated models. Includes what... MSRP: Now: $129.06 Out of stock SALE Adige | sku: 1686 Vespa / Kinetic Non Variating Performance Clutch by Adige Italian made Adige performance clutch innards for Single speed non-variating version models. Fits inside the stock clutch bell. *Best for tuning projects up to 43mm cylinder size. Try it out, let us know. Fits: Single Speed -... MSRP: Was: $70.07 Now: $40.68 Add to Cart SALE Kinetic OEM | sku: 1667 OEM Kinetic 105mm Rear Drive Pulley for Non-Variated Mopeds - TFR New original 105mm Rear drive pulley for non variated Kinetic models like the TFR, Luna etc. This is the smooth round 11mm hole with a Woodruff keyway version.Grey. Please be sure to compare before purchasing. MSRP: Was: $21.04 Now: $14.01 Add to Cart Kinetic OEM | sku: 1637 Kinetic Moped Starter Weights, Shoes / Pads - Magnum, Luna, Swift Original starter weights for Kinetic mopeds. Installation is based upon the moped. one way for Magnum models, the other for Luna Swift models. No springs, no rubber pads. Kinetic Part # #05029590 Recommended Accessories:Starter Clutch Spring MSRP: Now: $35.07 Add to Cart Kinetic OEM | sku: 1641 Kinetic TFR Magnum RIGHT Pedal Crank Arm, 20mm - Chrome New RIGHT hand side chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though... MSRP: Now: $28.04 Add to Cart Kinetic OEM | sku: 1636 Kinetic TFR Magnum LEFT Pedal Crank Arm, 20mm - Chrome New LEFT chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though some newer... MSRP: Now: $28.04 Add to Cart CIF | sku: 745 CIF Clutch Set for Vespa / Kinetic Non-Variated Mopeds CIF repalcement 3 Piece Clutch Weight, spring and plate set. Made in Italy CIF Part # 5570K Fits: Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, SI Kinetic TFR and similar MSRP: Now: $49.03 Add to Cart DR Racing | sku: 492 Vespa Non-Variated Clutch Weight Set with springs. DR Racing Top quality DR Racing replacement 3 Piece Clutch Weight Set and Reinforced springs for additional acceleration performance, Fits: Non-Variated Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, Gillera, Cita, SI Kinetic TFR (not tfr usa) and... MSRP: Now: $39.28 Add to Cart Previous 1 2 Previous 1 2 Compare Selected × OK
Kinetic OEM | sku: 1687 Original Kinetic TFR Moped Single Speed Clutch - 13227680 Original Kinetic TFR moped single speed clutch. Please please please compare before purchasing or send in pictures of your moped if not sure this is for you. May also fit the Piaggio Vespa Ciao.Single speeds only, not Variated models. Includes what... MSRP: Now: $129.06 Out of stock SALE Adige | sku: 1686 Vespa / Kinetic Non Variating Performance Clutch by Adige Italian made Adige performance clutch innards for Single speed non-variating version models. Fits inside the stock clutch bell. *Best for tuning projects up to 43mm cylinder size. Try it out, let us know. Fits: Single Speed -... MSRP: Was: $70.07 Now: $40.68 Add to Cart SALE Kinetic OEM | sku: 1667 OEM Kinetic 105mm Rear Drive Pulley for Non-Variated Mopeds - TFR New original 105mm Rear drive pulley for non variated Kinetic models like the TFR, Luna etc. This is the smooth round 11mm hole with a Woodruff keyway version.Grey. Please be sure to compare before purchasing. MSRP: Was: $21.04 Now: $14.01 Add to Cart Kinetic OEM | sku: 1637 Kinetic Moped Starter Weights, Shoes / Pads - Magnum, Luna, Swift Original starter weights for Kinetic mopeds. Installation is based upon the moped. one way for Magnum models, the other for Luna Swift models. No springs, no rubber pads. Kinetic Part # #05029590 Recommended Accessories:Starter Clutch Spring MSRP: Now: $35.07 Add to Cart Kinetic OEM | sku: 1641 Kinetic TFR Magnum RIGHT Pedal Crank Arm, 20mm - Chrome New RIGHT hand side chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though... MSRP: Now: $28.04 Add to Cart Kinetic OEM | sku: 1636 Kinetic TFR Magnum LEFT Pedal Crank Arm, 20mm - Chrome New LEFT chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though some newer... MSRP: Now: $28.04 Add to Cart CIF | sku: 745 CIF Clutch Set for Vespa / Kinetic Non-Variated Mopeds CIF repalcement 3 Piece Clutch Weight, spring and plate set. Made in Italy CIF Part # 5570K Fits: Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, SI Kinetic TFR and similar MSRP: Now: $49.03 Add to Cart DR Racing | sku: 492 Vespa Non-Variated Clutch Weight Set with springs. DR Racing Top quality DR Racing replacement 3 Piece Clutch Weight Set and Reinforced springs for additional acceleration performance, Fits: Non-Variated Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, Gillera, Cita, SI Kinetic TFR (not tfr usa) and... MSRP: Now: $39.28 Add to Cart Previous 1 2 Previous 1 2 Compare Selected × OK
SALE Adige | sku: 1686 Vespa / Kinetic Non Variating Performance Clutch by Adige Italian made Adige performance clutch innards for Single speed non-variating version models. Fits inside the stock clutch bell. *Best for tuning projects up to 43mm cylinder size. Try it out, let us know. Fits: Single Speed -... MSRP: Was: $70.07 Now: $40.68 Add to Cart
SALE Kinetic OEM | sku: 1667 OEM Kinetic 105mm Rear Drive Pulley for Non-Variated Mopeds - TFR New original 105mm Rear drive pulley for non variated Kinetic models like the TFR, Luna etc. This is the smooth round 11mm hole with a Woodruff keyway version.Grey. Please be sure to compare before purchasing. MSRP: Was: $21.04 Now: $14.01 Add to Cart
Kinetic OEM | sku: 1637 Kinetic Moped Starter Weights, Shoes / Pads - Magnum, Luna, Swift Original starter weights for Kinetic mopeds. Installation is based upon the moped. one way for Magnum models, the other for Luna Swift models. No springs, no rubber pads. Kinetic Part # #05029590 Recommended Accessories:Starter Clutch Spring MSRP: Now: $35.07 Add to Cart Kinetic OEM | sku: 1641 Kinetic TFR Magnum RIGHT Pedal Crank Arm, 20mm - Chrome New RIGHT hand side chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though... MSRP: Now: $28.04 Add to Cart Kinetic OEM | sku: 1636 Kinetic TFR Magnum LEFT Pedal Crank Arm, 20mm - Chrome New LEFT chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though some newer... MSRP: Now: $28.04 Add to Cart CIF | sku: 745 CIF Clutch Set for Vespa / Kinetic Non-Variated Mopeds CIF repalcement 3 Piece Clutch Weight, spring and plate set. Made in Italy CIF Part # 5570K Fits: Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, SI Kinetic TFR and similar MSRP: Now: $49.03 Add to Cart DR Racing | sku: 492 Vespa Non-Variated Clutch Weight Set with springs. DR Racing Top quality DR Racing replacement 3 Piece Clutch Weight Set and Reinforced springs for additional acceleration performance, Fits: Non-Variated Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, Gillera, Cita, SI Kinetic TFR (not tfr usa) and... MSRP: Now: $39.28 Add to Cart Previous 1 2 Previous 1 2 Compare Selected × OK
Kinetic OEM | sku: 1641 Kinetic TFR Magnum RIGHT Pedal Crank Arm, 20mm - Chrome New RIGHT hand side chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though... MSRP: Now: $28.04 Add to Cart Kinetic OEM | sku: 1636 Kinetic TFR Magnum LEFT Pedal Crank Arm, 20mm - Chrome New LEFT chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though some newer... MSRP: Now: $28.04 Add to Cart CIF | sku: 745 CIF Clutch Set for Vespa / Kinetic Non-Variated Mopeds CIF repalcement 3 Piece Clutch Weight, spring and plate set. Made in Italy CIF Part # 5570K Fits: Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, SI Kinetic TFR and similar MSRP: Now: $49.03 Add to Cart DR Racing | sku: 492 Vespa Non-Variated Clutch Weight Set with springs. DR Racing Top quality DR Racing replacement 3 Piece Clutch Weight Set and Reinforced springs for additional acceleration performance, Fits: Non-Variated Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, Gillera, Cita, SI Kinetic TFR (not tfr usa) and... MSRP: Now: $39.28 Add to Cart Previous 1 2 Previous 1 2 Compare Selected × OK
Kinetic OEM | sku: 1636 Kinetic TFR Magnum LEFT Pedal Crank Arm, 20mm - Chrome New LEFT chrome pedal crank arm for Kinetic mopeds. These are for the older TFR, Luna and Magnum models. *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though some newer... MSRP: Now: $28.04 Add to Cart CIF | sku: 745 CIF Clutch Set for Vespa / Kinetic Non-Variated Mopeds CIF repalcement 3 Piece Clutch Weight, spring and plate set. Made in Italy CIF Part # 5570K Fits: Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, SI Kinetic TFR and similar MSRP: Now: $49.03 Add to Cart DR Racing | sku: 492 Vespa Non-Variated Clutch Weight Set with springs. DR Racing Top quality DR Racing replacement 3 Piece Clutch Weight Set and Reinforced springs for additional acceleration performance, Fits: Non-Variated Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, Gillera, Cita, SI Kinetic TFR (not tfr usa) and... MSRP: Now: $39.28 Add to Cart Previous 1 2 Previous 1 2 Compare Selected × OK
CIF | sku: 745 CIF Clutch Set for Vespa / Kinetic Non-Variated Mopeds CIF repalcement 3 Piece Clutch Weight, spring and plate set. Made in Italy CIF Part # 5570K Fits: Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, SI Kinetic TFR and similar MSRP: Now: $49.03 Add to Cart DR Racing | sku: 492 Vespa Non-Variated Clutch Weight Set with springs. DR Racing Top quality DR Racing replacement 3 Piece Clutch Weight Set and Reinforced springs for additional acceleration performance, Fits: Non-Variated Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, Gillera, Cita, SI Kinetic TFR (not tfr usa) and... MSRP: Now: $39.28 Add to Cart Previous 1 2 Previous 1 2 Compare Selected
DR Racing | sku: 492 Vespa Non-Variated Clutch Weight Set with springs. DR Racing Top quality DR Racing replacement 3 Piece Clutch Weight Set and Reinforced springs for additional acceleration performance, Fits: Non-Variated Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, Gillera, Cita, SI Kinetic TFR (not tfr usa) and... MSRP: Now: $39.28 Add to Cart Previous 1 2 Previous 1 2 Compare Selected
U.S. Dollar
Canadian Dollar
Euro
British Pound
