Air & Fuel

Plastic Push In 30mm Gas Cap *no logo*

Push in vented gas cap with no logo.  Works on Puch Maxi N, Ktm/Foxi and similar step thru models who have a 30mm tank opening including the peugeot 102,103, motobecane mobylette, vespa ciao, bravo, Kinetic TFR, Derbi Variant. Sachs Hercules...

15mm Bing Clone Carburetor for Puch

Great replacement and upgrade for your Puch moped.  Top quality clone replica of the original Bing found on Puch, Jc Penny, Sears, Bombardier, Murray and similar Puch based mopeds.. Comes with 82 main jet which is better suited for 70cc setups...

Puch 30mm Step thru Gas Cap - Black with Logo

30mm one quarter turn original black Puch gas cap.    Fits the Maxi, Newport and  Macho  and similar Puch step thru mopeds.   *does not fit Magnum*  

12mm Bing Clone Carburetor for Puch

Great replacement clone of the Bing for  Puch powered mopeds like the maxi, magnum, newport, swinger, dart, murray, bombardier, pinto, etc.  Does not use original bing jets.  Best solution is to swap the orginal atomizer with your old...

12mm Bing Clone Carburetor for Puch (style 2)

Great replacement clone of the Bing for  Puch powered mopeds like the maxi, magnum, newport, swinger, dart, murray, bombardier, pinto, etc.  Does not use original bing jets.  Best solution is to swap the orginal atomizer with your old...

20mm UNI Foam Air Filter for Puch Bing Carburetors

High flow clamp on foam filter with flex core inner spring allows the filter to fit in confined areas and hold its shape for longer life.   Perfect size for Puch Bing Carburetors. 12mm, 14mm or 15mm,  20mm internal diameter

28mm UNI Black Foam Air Filter for Puch Bing Carburetors

High flow clamp on foam filter with flex core inner spring allows the filter to fit in confined areas and hold its shape for longer life.   Our go to filter for best performance. Will work on 20mm to 28mm diameter mounting flanges.

30mm Chrome Gas Cap, For Step Thru Mopeds

30mm chrome gas cap for many step thru mopeds including Tomos, Puch Maxi, Newport, Honda Hobbit and many more.

Amal / Arreche 15mm Pull Choke Carburetor

15mm Amal / Arreche pull choke carburetor. These are high quality Spanish carburetors with more tuning options than a Dellorto SHA and will outperform them with the right tuning. Shim ID 23mmShim OD 25mm#60 main jet.  Recommended Accessories:Amal...

Amal 15mm Cable Choke Carburetor

15mm Amal cable choke carburetor. These are high quality Spanish carburetors with more tuning options than a Dellorto SHA.  Can be used on intakes with a 19mm (SHA intake size) outer diameter with shim or remove the shim and use on 24mm (PHBG size)...

Amal 17mm Cable Choke Carburetor - Extended Adjustment Knobs

17mm Amal cable choke carburetor. These are high quality Spanish carburetors with more tuning options than a Dellorto SHA. Comes with 23.6mm shim. No shim = 26mm#60 main jet.  Recommended Accessories:Amal Carburetor Jets

Athena Style Reed for Puch Reed Type, NS-1, MB5

Puch/Athena MB5 stock Reed valve Fits Puch reed kits with similar intakes and Honda NS-1, MB5. Comes with metal reeds. Recommended Accessories: Carbon Fiber Reeds Tech Tip: Use Red Loctite on screws before installing.  

Athena Style Reed Valve Riser plate for Athena Reed kits, Puch, NSR50 and MB5

The basic building block for getting creative with reeds. This is an Athena Reed riser, and with some pretty simple shaving mods, allow you to put 4 petal reed blocks where you shouldn't. Fits Puch reed kits with similar intakes and Honda NSR50, MB5

Carbon Fiber Reed Set for Athena AJH Reed kits, Puch, Gila, NSR50 and MB5

2 x 2 petal carbon fiber reed set for NSR50, NS-1, Puch Gilardoni Kit and also will work on the MB5 and Puch Athena AJH kits as well as many Minarelli engine based scooters.  

Chrome Top Tank Gas cap 38mm for Puch Magnum, Tomos Targa LX, and others.

CHROME GAS CAP FOR TOP TANK MOPEDS AND MOTORCYCLES Puch: Magnum, Monza, Free Spirit, Swinger, Pinto,  Tomos: Targa LX  Trac: Zundapp: Kreidler   and others! Fits into tanks with 38mm bung

Fuel Petcock 12mm x 1 Left Flow - No Writing

12mm x 1mm left flow petcock for many mopeds, same 12mm thread as Tomos Revival,  Streetmate,Targa, Targa LX, Sprint, Flexer, Arrow, Honda hobbit, camino, PA50, PA50II, vespa bravo, puch swinger, puch freespirit, puch pinto, batavus hs50 and...

Fuel Petcock 12mm x 1.00mm Left Flow for Tomos, Honda, Puch and others.

Left flow petcock for LOTS of mopeds, same 12mm thread as Tomos, Honda hobbit, camino, PA50, PA50II, vespa bravo, puch swinger, puch freespirit, puch pinto, batavus hs50 and many more. fuel flows to the left - for 6mm fuel line 12mm thread

Fuel Petcock 16mm x 1.00mm

Top quality OMG petcock Fits Puch magnum and any other moped or motorcycle with 16mm x 1mm threading + use this on many different vintage motorcycles like Sears Allstate, guzzi, betamotor, ducati, fantic motor, benelli, aprillia, simpson, ktm,...

Fuel Petcock 16mm x 1.00mm for Puch Magnum, Kreidler and Sachs Mopeds

Fits Puch magnum and any other moped or motorcycle with 16mm x 1mm threading on / off / reserve fuel flows down - for 6mm fuel line 16mm x 1mm female thread on coupler nut   + use this on many different vintage motorcycles like motoguzzi,...

Fuel Petcock, for Puch Maxi, Newport and Vespa Ciao

Puch Maxi / Newport style petcock.   

Locking Chrome Top Tank Gas cap 38mm for Puch,, Tomos, and others.

Locking Chrome Gas Cap Puch: Magnum, Monza, Free Spirit, Swinger, Pinto,  Tomos: Targa LX  Trac: Zundapp: Kreidler   and others! Fits into tanks with 38mm bung opening.

Locking Gas Cap for Puch Maxi

Locking gas cap for your Puch Maxi. 30mm.   Tech Tip: If the cap fits too tightly make sure you clean the rust or corrosion inside of your bung, yep that is what it is called, or lightlly sand down the ribs on the gas cap shaft.  Sounds,...

NOS Bing Carburetor Banjo - Barbed Fuel Inlet

NOS replacement for your 12 & 14mm Bing carburetors.   Recommend Accessories: 12mm Bing carburetor

NOS Puch Plastic Gas Cap with Logo

Original NOS Puch gas cap with logo.  Works on Puch  models who have a 30mm tank opening like the Maxi N model.

OMG Fuel Petcock, for Puch Maxi and Newport models

Top quality OMG Puch Maxi / Newport type petcock. Also fits on the Vespa Ciao. Made in Italy. OMG # 01z2141069

Original 15mm Bing Carburetor for Puch

Great replacement and upgrade for your Puch moped.  Original German made quality. Comes with 82 main jet which is better suited for 70cc setups.  Make sure to pick up smaller jets for stock or less 70cc engines. 20mm I.D. clamp on...

Polini Carbon Fiber Reed for Honda MB5, Puch Athena AJH

Polini 2 petal Polini Carbon Fiber Reed for Puch Athena AJH Kits, Honda MB5, NS1 and NS50F like  THIS..3mm ThickComes with only one reed as shown.Polini Part # 213.0520 Tech Tip: Use Red Loctite on screws when installing.

Polyurethane Oil Injection Line / Hose, 2.2mm *by the foot* - Green

Translucent green polyurethane oil injection line for mopeds and many smaller motorcycles, such as Garelli, Puch Magnum, and Tomos. Can also be used for the air injection on your intake or carburetors. *The hose has a 2.2mm I.D. with a...

Puch 15mm Intake for Bing Carburetors - Polished

15mm intake for Puch Maxi, Newport, Magnum and similar mopeds Puch based engines.Works with stock carburetor or 15mm for increased air flow.Square port* Polished for better air flowDimensions:15mm O.D.20mm O.D.54mm Overall height Recommended...

Puch 15mm Intake for Bing Carburetors - Sqaurere Port

Square port 15mm intake for Puch Maxi, Newport, Magnum and similar mopeds Puch based engines.Works with stock carburetor or 15mm for increased air flow.Dimensions:15mm O.D.20mm O.D.8mm Thick flange54mm Overall height Recommended...

Puch 19mm OD Intake for SHA Carburetors - Sqaure Port

19mm intake for Puch mopeds. This will fit the  SHA Carburetors.Dimensions:38mm eye to eye 19mm OD 14mm ID Recommended Accessories:  Intake Gasket 

Puch Athena 15mm Intake for SHA Carburetors

Top quality Athena Intake for Puch E50 engines.  Square port gasket. Made for clamp style carburetors like SHA 15 / 16mm , but may work with others. Please compare before purchasing.    ID - 15mm OD - 19mmm   Recommended...

Puch Athena 19mm Intake

Athena Intake for Puch E50 engines.  PHBG carburetors on ZA50 mopeds work with this intake as well. Square port.Made for clamp style carburetors like PHBG but will also fit the VM18. ID - 19MMOD - 24MM Recommended Accessories: Square...

Puch Bing Metal Mesh High Flow Air Filter

Chrome metal mesh high flow air filter made for  for Puch Bing Style Carburetors with 20mm clamp on filter area (12mm, 14mm and 15mm sized carbs)*May or may not fit under your side covers* Dimensions:With reducing bushing will fit...

Puch Intake for PHBG Carburetors - Raw

Puch PHBG intake manifold for Puch Maxi E50 and similar type mopeds.Allows one to use a Dellorto PHBG clamp on style carburetor.  Also will fit a Dellorto PHBG. Dimensions:19mm I.D.24mm O.D.38mm Eye to eye Recommended Accessories: Square Port...

Puch Intake for PHBG Carburetors, Square Port - Chrome

Chromed PHBG intake manifold for Puch Maxi E50 and similar type mopeds. Chromed for best flow but could still use some finishing with a rotary tool or files. Allows the use of a Dellorto PHBG clamp on style carburetor. Dimensions:19mm I.D.24mm O.D...

Puch Intake for PHBG Carburetors, Square Port - Polished

Polished (not chromed) PHBG intake manifold for Puch Maxi E50 and similar type mopeds. Polished for better flow but could still use some finishing with a rotary tool or files. Allows the use of a Dellorto PHBG clamp on style carburetor. Dimensions:19mm...

Puch Maxi Petcock 12mm

Classy petcock for Puch Maxi / Newport type mopeds.  Will work with the Vespa mopeds as well.12mm x 1mm threadsUp is onRight is reserveDown/Left is off *No longer gold*

Puch MV/VS/DS/MS OMG Fuel Petcock

Top quality OMG Puch MV50, VS50, MS50 Sears Freespirit Mopeds 12mm x 1.00mm Made in Italy.  

Puch Pinto Intake Manifold, 15Id/20 OD - Round Port

Replacement Puch Pinto/X30 Round Port intake manifold. Dimensions:20mm OD15mm ID38mm eye to eyeMounting block is 50mm Long x 24mm wide.7.5mm Thick Mounting block42mm rise from top of block to bottom of inlet.48mm reach from rear of the 90 bend to...