Sachs

NOS CEV Bulb Socket for Non-Sealed Moped Headlights

Non-sealed Headlight socket for CEV headlights.Made in Italy by CEVPuch # 349.2.53.819.2. CEV # 18889 Fits:CEV 2157B Headlamp Found on some models of: Batavus, Beta, Bianchi, Cimatti, Fantic, Garelli, Intramotor, Italjet, Malaguti, Motron, Negrini,...

Neon Yellow Universal Cable Housing *Sold by the Foot*

Cable housing for custom applications.  Reuse you inner cable and fit a knarp if needed.  Or use new inner cable and make any length desired. Large enough internal diameter for 2.2mm brake cables, but can be used for throttle, decomp, choke or...

Neon Green Universal Cable Housing *Sold by the Foot*

Cable housing for custom applications.  Reuse you inner cable and fit a knarp if needed.  Or use new inner cable and make any length desired. Large enough internal diameter for maximum 2.2 mm brake cables, but can be used for throttle, decomp,...

Neon Pink Universal Cable Housing *Sold by the Foot*

Cable housing for custom applications.  Reuse you inner cable and fit a knarp if needed.  Or use new inner cable and make any length desired. Large enough internal diameter for maximum  2.2mm brake cables, but can be used for throttle,...

Puch VDO Speedometer Cable - 85cm

Speedometer cabke for most Puch Mopeds like the Maxi, Magnum Newport, Swinger, Pinto, Freespirit, Murray, Bombardier etc. as well as Sachs and Kreidler For VDO speedometers 850mm Long = 85cm 1.6mm inner cable end  Measure and compare yours for...

Puch VDO Speedometer Cable - 75cm

Speedometer cabke for most Puch Mopeds like the Maxi, Magnum Newport, Swinger, Pinto, Freespirit, Murray, Bombardier etc. as well as Sachs and Kreidler For VDO speedometers 750mm Long. 1.6mm inner cable end  Measure and compare yours for best...

Universal 12v Regulator for Mopeds and Motorcycles

Use this on 12v CDI and Points ignitions to prevent blowing out of light bulbs from voltage surges. Connect white wire in between (parallel) with ignition power output wire and ground the black wire.

Heavy Duty Voltage Regulator

Protects light bulbs from blowouts. Universal application for mopeds and motorcycles.  Connect yellow wire in between (parallel) with ignition power output wire (or in-line to headlights or taillights) and ground the black wire.Great...

NGK B7ES Long Reach Spark Plug

NGK long thread ES spark plugs longer thread for use in sachs, derbi and tomos A55, and more!  numbers correspond to the temperature of the spark. 5 is the hottest and 10 is the coolest. stock mopeds will generally run a 5 or 6, 60cc-70cc mopeds...

415 x 122L Drive Chain

 Moped Drive chain for most mopeds.  Great quality and dependably strong. 415 x 122Includes Clip Style Master Link. Links may have to be removed depending on your model and gearing.   Recommended Accessories: Chain Breaker

300mm MKX Black Moped Shocks

Replacement pair of 300mm Black on Chrome adjustable shocks for many mopeds and small motorcycles. Measure from eye to eye and compare. Some mopeds you can go a little longer for more travel and clearance.  Stiffen or loosen up your rear end with...

Speedometer Cable Inner Cable for CEV, Tomos and other Mopeds

Fits Tomos A3, A35, A-3, A-35, Targa, Targa LX, Targa TT, Sprint, Bullet, Silver Bullet, Gold Bullet and most other mopeds with a CEV Speedometer. May fit some A55 models as well. 2mm x 2mm  cable end 31" Long

Speedometer Cable with 10mm & 11m ends. For Tomos Pre 01/03 Models / Sachs Columbia Commuter / Garelli

 Normally fits the A3 87-91 Golden Bullet, A35 92-06 Targa, LX, Sprint, Bullet, TT Classic, Sachs Columbia Commuter and Garelli.  **Please check yours and compare before ordering.  Some model mopeds have the same size cable ends on both...

9.5mm Pedal Arm Pin

Replace your worn, stripped pins.    9.5mm SOLD EACH!

Sedona Inner Tube 2.25" - 2.50" - 17" for Mopeds / Motorcycles

High quality Sedona brand motorcycle or moped tube.  For 17 x 2.25 to 2.5in tires. Most commonly used size tube. Talcum powder coated for easy installation.Great fo Puch Maxi, Magnum, and Newport mopeds. Also found on  most Peugeot, and...

Shinko SR704 2.25" x 17" Moped Tire

The SR704 is designed as an OEM replacement for mopeds with 2.25-17  tires and some that originally had 2.00-17 size. Features include: Tough nylon carcass 4 ply rated DOT approved L speed rating (75mph) Tube type Can be used on front or...

CEV 5" Round Metal Moped Headlight for Puch, Tomos and more. *Gloss Black*

New Old Stock Puch Headlight Bucket.   Comes with a single filament 6v sealed bulb.  Fits most mopeds and is 5" wide mount to mount.Top qualtiy steel and glass.  Made in Italy! GLOSS BLACK CEV 2143 Recommended Accessories : 12volt...

Universal Spark Plug Cap for 2 stroke Mopeds &Motorcycles LB05F

Generic NGK Clone LB05F 5k Resistor cover used on most 2 stroke mopeds, vintage motorcycles and scooters. For spark plugs with terminal threads. Not nut type Got a nut on your plug? No worries, most are removable from the spark plug to expose the...

Universal Round Moped Mirror Set 8mm threads with clamps. Tomos A3/ A35

4" round black mirrors with 8" chrome stems.  Perfect for Tomos A3 and A35 mopeds with mirror non-threaded mirror brackets.  Or use the universal clamps to attach to any 7/8" handlebars on any other mopeds, scooters or motorcycle. Comes with...

Universal Choke / Decompression / Starter Plastic Lever *Matte Black*

Lever for cable choke or decompression on mopeds like Motobecane, Puch, Peugeot, Honda PA50 and many more. For bars from 20mm to 24mm (any 7/8" Bar) Recomended accessories:      Universal cable      Cable Knarp

Clear PVC Spark Plug Wire *by the foot*

High quality american made spark plug wire for classic mopeds, motorcycles, cars and even tractors. 7mm Clear PVC Spark Plug Wire (Has Copper Conductor & PVC Insulation.  Super cool see through wire. *SOLD BY THE FOOT*  Depending on your...

Black PVC Spark Plug Wire *by the foot*

High quality american made spark plug wire for classic mopeds, motorcycles, cars and even tractors. 7mm Black PVC Spark Plug Wire (Has Copper Conductor & PVC Insulation. *SOLD BY THE FOOT*  Depending on your application 1 or 2 feet will be...

Cotton Braided Spark Plug Wire, Black with Blue Tracers *by the foot*

Great quality american made bradied spark plug wire for classic mopeds, motorcycles, cars and even tractors. 7mm  Cotton Braided Spark Plug Wire with Copper Conductor & PVC Insulation with 1 Layer of Cotton Braid & Lacquer for protection...

Cotton Braided Spark Plug Wire, Green with Yellow Tracers *by the foot*

Great quality american made bradied spark plug wire for classic mopeds, motorcycles, cars and even tractors. 7mm  Cotton Braided Spark Plug Wire with Copper Conductor & PVC Insulation with 1 Layer of Cotton Braid & Lacquer for protection...

Cotton Braided Spark Plug Wire, Black with Green Tracers *by the foot*

Great quality american made bradied spark plug wire for classic mopeds, motorcycles, cars and even tractors. 7mm  Cotton Braided Spark Plug Wire with Copper Conductor & PVC Insulation with 1 Layer of Cotton Braid & Lacquer for protection...

Cotton Braided Spark Plug Wire, Red with Black/Yellow Tracers *by the foot*

Great quality american made bradied spark plug wire for classic mopeds, motorcycles, cars and even tractors. 7mm Red with Black & Yellow Tracers, Cotton Braid Spark Plug Wire with Copper Conductor & PVC Insulation with 1 Layer of Cotton Braid...

415 Master Link for Moped Drive Chains

415 Chain Master Link  The missing link you need to connect your drive chain on Tomos, Puch, Motobecane, Peugeot and many others.

Red Handle Fuel Petcock 16mm x 1.00mm

Fits Puch magnum, Columbia Commuter,  and any other moped or motorcycle with 16mm x 1mm threading + use this on many different vintage motorcycles like guzzi, betamotor, ducati, fantic motor, benelli, aprillia, simpson, ktm, husqvarna, adler, ardie,...

Trail Tech TTO Universal Tachometer and Hour Meter / Gauge

Trail Tech Tachometer and Hour Meter Great product to quickly and easily add a Tachometer to your moped.  A small wire wraps around your spark plug wire.  Once started the gauge records how much total elapsed time the engine has run as well as...

Bosch style condenser for Puch, Tomos A35, Sachs 505 *Screw on*

Top quality aftermarket  condenser for various Puch powered mopeds with Boscho ignitions. Tomos A35 with Bosch / Iskra points ignition.  As well as Batavu and  Sachs 505 engines. Screw on terminal for easy connection  18mm wide...

Universal Throttle / Choke / Decompression Inner Cable

1mm diamter inner cable perfect for replacing your worn or damaged throttle, choke or decompression  cable.   3mm x 5mm end barrel 2 meters long = 6.5'  Cut to length! Recommend accessories: Throttle Knarp

Puch Style 3 way Chrome Switch *Guia*

 Puch  style chrome switch.   3 way position for headlights, low beam/high beam/off.  Plus there is a button on the top and side that can be used for a horn or kill switch. Can be used on Puch or any other mopeds / motorcycles...

Black Euro Style Headlight with Switch

  This version was normally found on Solo,  Zundap's and Hercules mopeds.  Can be used with many other mopeds like the Puch maxi and Newport too.   It features a on and off switch on top. Comes with a speedometer cover or use...

Gold 30mm Gas Cap, For Step Thru Mopeds

30mm chrome gas cap for many step thru mopeds including Tomos, Puch Maxi, Sachs, Hercules Honda Hobbit and many more. Goldish color.  

Sachs / Hercules 28mm Left Hand Exhaust Header

Chrome exhaust header for use on Sachs powered mopeds with exhaust flange and left hand mounted exhausts.  Allows for the use of a universal type exhaust for models that normally have no options.28mm od, 25mm id flange14.5" / 37cm overall...

Sachs / Hercules Prima 25 Exhaust Header

28mm od, 26mm id flange 17mm id For Sachs / Hercules Prima 25 HA10022211 Made in Germany

Sachs / Hercules Prima 26mm Exhaust Header *Right*

Replacement stock exhaust header for various mopeds which used the Sachs 504 and 505 engines.  Comes with clamp, not shown 26mm i.d. Cylinder connection 28mm Exhaust connection and smaller end tube is 22mm For:  Sachs 504 505 /...

Block Pedal Set - No Logo

Piaggio/Vespa style pedals with reflectors that are the kind that came stock on the Ciao, SI, Bravo and probably others.  Fits 99% of mopeds.   9/16th threads.   Pedals are the same but NO longer include the Piaggio logo.  

Classic Union Moped Pedal Set

Top quality Union brand Classic style pedals with reflectors.  Fits 99% of mopeds.   Just like many original pedals that came standard. 9/16th threads. Comes with left and right pedals. Union now made by Marwi

Fuel Petcock 16mm x 1.00mm for Puch Magnum, Kreidler and Sachs Mopeds

Fits Puch magnum and any other moped or motorcycle with 16mm x 1mm threading on / off / reserve fuel flows down - for 6mm fuel line 16mm x 1mm female thread on coupler nut   + use this on many different vintage motorcycles like motoguzzi,...