Gaskets and Seals

Tomos Headlight Bracket/Fork Sleeve O Ring

Tomos Headlight Bracket/Fork Sleeve O Ring. This O ring fits under your headlight bracket sleeve to calm vibration and noise. * Two per moped. Works with 93-06 Tomos A35 mopeds. Replaces Tomos # 229399

Tomos A35 Complete 50cc Engine Gasket Set - 11 Hole

Replacement complete 50cc/38mm gasket set for Tomos mopeds with A35 reed engines. Models like the Targa, LX, Sprint, etc.This is the 11 hole version which is for pre 2003 models. Gaskets Included:ClutchCaseBaseHeadReed(x2)

Tomos A3 / A35 Base Gasket , 0.3mm - Fits Puch

Quality base gasket for A3 / A35 equipped Tomos mopeds as well as Puch engines.0.3mm thickness Replaces Tomos # 227144

Tomos Magneto / Case Wire Rubber Grommet - 3 hole version

New rubber grommet for the magneto wires that travel through your case on the A3, A35, A55 mopeds. *Please note, This has 2 small and one large hole most have a closed large hole, you may need to plug it with some silicone or use this grommet with...

50cc/38mm Aluminum / Fiber Head Gasket for Puch & Tomos - 1.5mm

Replacement 50cc head gasket for Tomos with A3, A35, and A55 Engines as well as Puch mopeds with E50 Engines. 38mm1.5mm thickness

Tomos A3 Complete Engine Gasket Set - Top End + Case

Original Tomos A3 Complete Gasket Set. Made for 1975-1991 Tomos A3 powered mopeds.*Be sure to compare before purchasing.Tomos # 209787

Tomos A3 38mm 50cc Gasket Set: Base, Head, Intake, Exhaust

Tomos A3 38mm 50cc top end engine gasket kit for piston port style tomos mopeds.Includes: Head, Base, Intake, exhaust. *Be sure to compare before purchasing.

Tomos A35 38mm 50cc Gasket Set: Base, Head, Intake, Exhaust

Tomos A35 top end engine gasket kit for Reed valve style tomos mopeds.Includes: Head, Base, Reed(x2), exhaust.*Be sure to compare before purchasing. 

Exhaust Gasket for Puch, Tomos, & More 24mm

This gasket is used on Minarelli, Derbi, Puch, Tomos, Garelli, and Morini mopeds. This is an upgrade to the stock 20 or 23mm gasket. 24mm  I.D.   2mm Thickness. 43mm center hole to center hole. Tomos # 203862 , 227149   Recommended...

Tomos A35 Clutch Cover Gasket - 222087

High quality Tomos A35 clutch cover gasket, for 1992 - 2003 A35 mopeds only.  Works for Targa, Sprint, St, Etc. Thickness is  0.30mm Replaces Tomos # 232971 , 222087

Dellorto SHA 14-16mm Carburetor Plastic Air Filter Cover 6183

Air filter cover for the Dellorto SHA  14.12, 14.14,  15.15 and 16.16 and similar. Also works with clone carbuetors.   Dellorto # 6183     *This is NOT a genuine Dellorto product.    Genuine Dellorto...

Tomos A35, Peugeot 103 Reed Valve / Intake Gasket

Reed valve gasket for the Tomos A35 and Peugeot 103 intakes and certain Pollini reed valves.0.3mm thickness*Sometimes orange, sometimes black, same thickness.  Tomos replacement part # 223748  

Tomos Airsal 44mm Reed Valve Gasket Kit - A35

Airsal 44mm gasket kit.  Includes: Intake gaskets Base gasket   Recommended Accessories:  Airsal 44mm Cylinder Kit w/ Head

Tomos A35 / A55 Center Case Gasket

Tomos OEM A35 A55 center case gasket Thickness 0.35mm Tomos#  222098

NOS Tomos A3 Crankcase Gasket

Tomos A3 crankcase gasket  Thickness 0.35mm Tomos#  219368

NOS Tomos A3 Clutch Cover Gasket

NOS Tomos A3 clutch cover gasket  Thickness is  0.40mm Tomos#  209084

Tomos A3 / A35 Base Gasket , 1mm - Fits Puch

Quality base gasket for A3 / A35 equipped Tomos mopeds as well as Puch engines.1mm thickness Replaces Tomos # 223796

Puch / Tomos 38mm Head Gasket

Puch 38mm head gasket for 50cc cylinder kits.  Will also work on Tomos

Dellorto SHA 14-16mm Carburetor Air Filter Cover 6183

Air filter cover for the Dellorto SHA  14.12, 14.14,  15.15 and 16.16 and similar. Also works with clone carbuetors.   Dellorto # 6183  

Dellorto SHA 14-16mm Carburetor Rebuild Kit, Tomos

Complete gasket rebuild kit for SHA carburetors  14.12, 14.14,  15.15 and 16.16 and similar. Also works with clone carbuetors.   Dellorto # 52533   Suitable replacement for Tomos Part # 219875 

Engine Oil Seal Set Tomos A3 A35 A55

 Oil seal set for your Tomos A3, A35, A55 engine. Comes with four seals shown.

Quality Engine Oil Seal Set Tomos A3 A35 A55

Quality Oil seal set for your Tomos A3, A35, A55 engine.*Comes with four seals shown. Dimensions:35mm ID x 47mm OD x 7mm Thick15mm ID x 24mm OD x 7mm Thick(x2)17mm ID x 35mm OD x 7mm Thick

28mm Puch / Tomos Exhaust Gasket *Crush Type*

Metal lined, crush style  exhaust gasket for Puch, Tomos and other mopeds.  Top quality! Best used with performance exhaust and larger cylinder kits or with heavy porting. 28mm I.D. 2mm Thick 42mm center hole to hole

20mm Stock Exhaust Gasket for Puch and Tomos

2mm thick  asbestos high quality stock style exhaust gasket  Fits:   Tomos, Puch 20mm ID 42.5 center to center holes 

Puch, Tomos Base Gasket .5mm

Meedium version base gasket for Puch and Tomos mopeds. Extra thin so you can seal your kit with out loosing compression from gaskets that are too thick. .5mm

Performance Exhaust Gasket for Puch, Tomos & More, 28mm

This gasket is used on Minarelli, Derbi, Puch, Tomos, Garelli, and Morini mopeds. Basically anything with a performance exhaust can use it. 28mm  I.D. for unrestricted power.   Metal lined for long lasting reliability. 42mm center hole to...

Engine Oil Seal Set Tomos A3 A35 A55

Oil seal set for your Tomos A3, A35, A55 engine. Best for the Tomos 4l.*Be sure to measure and compare before purchasing.   Dimensions:18mm ID x 30mm ID12mm ID x 22mm OD15mm ID x 24mm OD (x2) 17mm ID x 35mm OD x 7mm Width

Tomos A35 Moped Complete Engine Gasket Set

Top quality complete gasket set for the Tomos mopeds with A35 engine. Comes with everything shown. Color may vary. Tomos # 227331

Tomos A3 Complete Engine Gasket Set

Top quality  complete engine gasket set for Tomos A3 mopeds.   Comes with everything shown.    

Tomos A35, Peugeot 103, Polini style Reed Valve / Intake Gasket

Reed valve gasket for the Tomos A35 and Peugeot 103 intakes and certain polini reed valves Replaces Tomos # 223748

Tomos A35 70cc Gasket Set: Base, Head, Intake, Exhaust

Gasket set for  Tomos A35 70cc Cylinder Kits,  Includes:  Head, Base, Intake x2 and exhaust