Bearings and Seals

Puch E50 4 Bearings Set

Bearings set for rebuilding Puch E50 engines. Found on many mopeds like the  Maxi, Newport, Pinto, Swinger, Dart, etc. Includes:(x3) 6203 C3 Bearings(x1) 6203 NR C3 Bearing Recommended Accessories:  3 Seal Set Complete Seal Set

Motobecane Crankshaft Seal - Per Piece

Seals for your crankshaft on your Motobecane moped.  AV7 or AV10 **Sold per piece. Order one, get one. 21mm x 4mm x 13mm

Original Crankshaft Bearing / Seal Set for Vespa, Piaggio, Kinetic

Original crankshaft and seal kit made by SKF in Italy. Comes with 2 main crankshaft bearings and the seal as shown.  Quality SKF, from Italy. Fits: Vespa / Piaggio / Kinetic mopeds.  Bravo, Ciao, Ecco, Grande, Grillo, SI, TFR,

Puch E50 Crankshaft Bearings - BAC

BAC quality bearing kit for Puch E50 powered mopeds like the Maxi, Newport, freespirit, pinto, etc.  Includes:1 - 6203 /C3 bearing (clip groove)1 - 6203 / ST Bearing (unsealed)Recommend Accessories:Oil Seal - 22 x 40 x 7  

Athena Wrist Pin Bearing, Honda MB5 / NSR50 / NS-1 / NS50f 12 x 17 x 14

Athena racing 12mm x 17mm x 14.2mm wrist pin needle bearing. For the crankshaft connecting rod, commonly referred to as the con rod. Dimensions:12 x 17 x 14 = 12 ID x  17 OD x 14.2 Width Known fitments:Honda NSR50, NS-1, NS50F, MT50,...

Puch E50 Bearings and Seal Set - 4 Bearings / 3 Seals

Bearings and seals set for rebuilding Puch E50 powered mopeds. Includes:(x3) 6203 C3 Bearings(x1) 6203 NR C3 Bearing(x2) Crank seals 17 x 40 x 7(x1) output shaft seal 22 x 40 x 7

Copper Exhaust Seam Ring Gasket, fits Honda, Motobecane, Peugeot - Polini

Polini brand copper crush gasket to keep your exhaust leak free. Fits Honda Hobbit PA50II, Camino, Express, Urban Express, Peugeot 103, Motobecane with engines Av7, Av10, Av87, AV88 and others...  As well as the Yamaha QT50.  *Does not fit the...

Puch 12mm Connecting Rod Bushing - 12 x 14 x 12

Replacement Puch connecting rod bushing. No lubrication hole, drill one yourself.Will fit Vespa Piaggio mopeds such as the Ciao, Grande, Si, and Bravo. *Must have 12mm wrist pin. **If you do not check the specs of your wrist pin you may have fitment...

Wrist Pin Needle Bearing, 12 x 15 x 15

Standard wrist pin bearing for the crankshaft connecting rod, commonly referred to as the con rod.12x15 x15 - 12=ID 15 =OD 15 =Width*Please measure your current bearing or con rod to confirm your needed size. This bearing will fit:Tomos A35, A55, Puch,...

Wrist Pin Bearing 12 x 15 x 15

Replacement wrist pin bearing for the crankshaft connecting rod, commonly referred to as the con rod. 12 x 15 x 15 12= ID 15= OD 15= Width This bearing will fit:Tomos A35, A55, Puch, some Vespa and Peugeots, and many more moped con rods with a 12mm...

Puch E50 Output Shaft Viton Oil Seal - 22 x 40 x 7

Puch E50 Output shaft seal. Viton Seal made by Artein Dimensions:22 x 40 x 7

6203 NR Crankshaft Bearing - Puch E50, Tomos, Peugeot, Garelli

Replacement NTN 6203 NR bearing. Fits post 1984 Puch E50 powered mopeds like the Maxi, Newport, freespirit, pinto, etc. Also fits Tomos A3 (post 1986),  A35 / A55 engines and Minarelli V1, Puch ZA50 output shaft and many more brands and models...

Puch Maxi E50 Crank Oil Seal - 17 x 40 x 7

Replacement crank seal for Puch E50 powered mopeds like the Maxi, Newport, freespirit, pinto, etc. Also fits Garelli VIP crank. Includes:(x1) Crank seal 17 x 40 x 7

Vespa Piaggio Kinetic Complete Gaskets and Seals Kit - Engine Rebuild

Olympia brand rebuild kit. Made for Vespa Piaggio and kinetic mopeds such as the ciao, boxer, si, bravo, TFR.  Includes:Case gasketGear box GasketBase gasketCrankshaft sealCrankshaft bearings(Taiwan)Flywheel woodruff key

Tomos Engine Oil Seal Set Tomos A3 A35 A55

Tomos engine oil seal replacement kit. Includes crank seals, output shaft seal, and distance bushing. NO pedal crank seal. Dimensions:(x2) 17ID x 35OD x 7W Seals35ID x 47OD x 7W Seal30ID x 35OD x 11W Bushing

6202 Bearing 35x15x11 - Kinetic Original

Original Kinetic Crankshaft bearing for all kinetic mopeds. This will fit Vespa Piaggio and Sachs cranks as well. 6202 bearing 35OD x 15ID X 11 W (mm) Made in India

Puch E50 Crankshaft Bearings and Seals Kit - BAC

BAC quality bearing and seal kit for Puch E50 powered mopeds like the Maxi, Newport, freespirit, pinto, etc.  Includes:1 - 6203 /C3 bearing (clip groove)1 - 6203 / ST Bearing (unsealed)2 - 17x40x7 SealsRecommend Accessories:Oil Seal - 22 x 40...

Kinetic / Vespa Moped Crank Shaft Oil Seal - 15 x 24 x 5

Original Kinetic seal 24mm outer diameter, 15mm inner diameter with a 5mm thickness. Crankshaft oil seal for all kinetic mopeds. Will also fit Vespa crankshafts, minarelli V1 output shaft and pedal shaft seals along with the morini m1/m01...

Wrist Pin Bearing, Honda MB5 / NSR50 / NS-1 / NS50f 12 x 17 x 13

Racing wrist pin needle bearing for the crankshaft connecting rod, commonly referred to as the con rod. This bearing will fit: Honda NSR50, NS-1, NS50F, MT50, MB5, MB50, MTX50, X8R, SFX, Bali.Kymco DJY50, KB, K12, Heroism, Top Boy, Dink.Piaggio...

SKF Motobecane Engine Bearings and Seals Set - 6302

SKF Engine Bearings for Motobecane mopeds like the AV7, AV10, AV88, 50v, and 51v.   Bearings are 16 x 42 x 13 - 6302/16   *You receive 2 bearings and 2 seals.   Made in Italy

Original Tomos Wrist Pin Bearing, 12 x 15 x 15

NOS original Tomos wrist pin bearing for the cranshaft connecting rod, commonly referred to as the con rod. This bearing will fit Tomos A35, A55 Puch, some Vespa and Peugeots, and many more moped con rods with a 12mm bearing. 12 x 15 x 15   12= I...

Motobecane Wrist Pin Bearing

 Motobecane wrist pin bearing 13 x 16 x 14mm

Motobecane Crankshaft Seal Set

Seals for your crankshaft on your Motobecane moped.  AV7 or AV10 Includes 2 21mm x 4mm x 13mm

Motobecane Engine Bearings and Seals Set - 6302

Engine Bearings for Motobecane mopeds like the AV7, AV10, AV88, 50v, and 51v.   Bearings are 16 x 42 x 13 - 6302/16

Piston Wrist Pin Bearing, 12 x 15 x 15

Wrist pin bearing for the crankshaft connecting rod, commonly referred to as the con rod. 12x15x15 12=ID 15 =OD 15 =Width This bearing will fit: Tomos A35, A55, Puch, some Vespa and Peugeots, and many more moped con rods with a 12mm bearing.Honda...

Wrist Pin Bearing, Racing Style 10 x 14 x 13

Racing wrist pin needle bearing for the cranshaft connecting rod, commonly referred to as the con rod. This bearing will fit Tomos A3, Honda, some Vespa, Peugeot, and many mopeds with  10mm wrist pins. 10 x 14 x 13   10= I.D  14 = O.D...

Wrist Pin Needle Bearing, 10 x 14 x 13

Standard wrist pin needle bearing for the crankshaft connecting rod, commonly referred to as the con rod.This bearing will fit Tomos A3, Honda, some Vespa, Peugeot, and many mopeds with 10mm wrist pins. 10 x 14 x 13   10= I.D  14 = O.D. 13 =...

Athena Honda Hobbit PA50 Engine Seal Kit

Top quality seal kit by Athena. Includes: 2x - 15 x 25.5 x 71x - 12 x 22 x 51x - 23 x 34 x 5 Fits: Honda PA50I, PA50II, Camino / Hobbit, PX50.   Athena # P400210400005      

Honda Hobbit PA50 / Camino Performance Crankshaft Seal 17 x 25.5 x 7

Top quality Honda crankshaft seals for the Hobbit, PA50I, PA50II when used with the performance crankshaft. 17 x 25.5 x 7  Honda Part # 91201-GB7-631  

Honda Hobbit PA50 Crankshaft Seal 15 x 25.5 x 7

Top quality Honda crankshaft seals for the Hobbit, PA50I, PA50II, NU50 Urban Express, NC50 Express and others with similar engine setup.   15 x 25.5 x 7     

SKF 6004 C3 Crankshaft Bearing

Top quality bearings made by SKF, Germany. Mostly used for crankshaft bearing for the Honda PA50 Hobbit, Camino, Express, Urban Express and similar engined models. Sold each.

Athena Crankshaft bearing and Seal Set for Vespa, Piaggio, Kinetic

Comes with 2 main crankshaft bearings and seal shown.  High quality by Athena Italy.Fits: Vespa / Piaggio / Kinetic mopeds.  Bravo, Ciao, Ecco, Grande, Grillo, SI, TFR, Athena # p400480444002

Engine Oil Seal Set Tomos A3 A35 A55

 Oil seal set for your Tomos A3, A35, A55 engine. Comes with four seals shown.

Quality Engine Oil Seal Set Tomos A3 A35 A55

Quality Oil seal set for your Tomos A3, A35, A55 engine.*Comes with four seals shown. Dimensions:35mm ID x 47mm OD x 7mm Thick15mm ID x 24mm OD x 7mm Thick(x2)17mm ID x 35mm OD x 7mm Thick

Crankshaft Bearing and Seal Kit for Tomos and Minarelli V1Engines

Two 17 x 40 x 12 6203 C3 bearings and two 17 x 35 x 7 seals.Fits Tomos A3(after 1986 only), A35 and A55 engines.  As well as the Minarelli V1*Please be sure to measure and compare before purchasing.