U.S. Dollar
Canadian Dollar
Euro
British Pound
Product Description
Clone spigot mount PHBG 21mm BS cable choke carb. This style of mounting can reduce vibrations to the carb and be a little tighter and less prone to air leaks than a clamp style carb that doesn't quite match up. These carbs have three jets, air mixture screw, and endless tuning opportunities thanks to a wide variety of needles, throttle slides, jets, etc. they solve many of the problems had with old inefficient carbs on motobecane, peugeot, puch, minarelli, sachs, garelli...
*Typically includes a 60mm air filter adapter.
Typical jetting:
50 SlideW16 Needle
262AU Atomiser
96 Main jet
48 Idle jet
Recommended Accessories:
5mm Main Jet
PHBG Intake (for your engine type if needed)
Rubber Manifold Coupler
Universal Throttle / Choke Cable
Pull Choke Conversion
60mm Air Filter
PHBG Intake (for your engine type if needed)
Rubber Manifold Coupler
Universal Throttle / Choke Cable
Pull Choke Conversion
60mm Air Filter
