ELEC

Vespa Piaggio Ciao / Citta Wiring Harness

Vespa Piaggio Ciao wiring harness.   Can also be used on a Citta. Possibly Bravo and Boxer.  Grande may be too short.  Life's short, take chances.NOTE: This is not a complete...

Vintage Style Metal Spark Plug Boot, Resistor type

New  vintage style spark plug boot / cap. 5k Resistor type.** For threaded tops, simply remove the nipple on your spark plug to fit this boot.  Recommended Accessories:Spark...

Bullet Headlight, Non- Sealed - Smaller CEV Style

Nice clean Black Bullet Headlight now available. Non-sealed beam bulb allows for easy replacement. Dual filament style for low and high beam applications.  Dimensions: Measure first!Diameter =...

CEV / Ducati Style Point with Wire. Tomos A3, Morini and Minarelli

Replacement points for CEV/Ducati ignitions found on some Tomos A3, Garelli, Minarelli, Cimatti and Morini mopeds.  Please compare before yours buying.   DOES NOT FIT THE TOMOS...

Clear Spark Plug Cap, Resistor type

  Fresh clear view  spark plug boot / cap for that Greased Lightning feel.   For spark plugs with terminal nuts not threaded studs   Resistor...

Electric Wire Sheathing / Tubing, 8mm - By the Foot

Black mm or 5/16" wire sheathing so by the foot.Excellent for tidying up those old cables or your new project. 

Honda MB5 Battery Strap Replacement - Rubber

Replacement rubber battery strap for Honda MB5 motorcycles. 

Honda MB5 Rear Brake Light Switch w/ Spring

Aftermarket replacement taillight switch for Honda MB/MT 50. Includes the switch, spring, and 26mm long leads with 3.5mm male and female ends.

Honda MB5 Wiring Harness

Replacement wiring harness for the Honda MB5. Roughly 63" Long.

Honda MB5, NSR Complete CDI Stator Plate, 50 - 80cc

Stock CDI Ignition stator assembly for Honda MB5, NSR and others, will work on 50-80cc. Be sure to check timing. 2 teal1 white1 blue1 black1 yellow MB, MT, MTX-SH, NSR/NS1,Honda 80MB 80, MBX 80, MT...

Honda MB5/MT50 Turn Signal, Each - aftermarket

Replacement / aftermarket Honda MB5 turn signals. Fits MB5 (MB50), MT5 (MT50).Includes 12V 10W bulb.Could be used on many custom applications.Dimensions:82mm High71mm Wide78mm Deep

Piaggio Vespa Internal Ignition Coil

Replacement internal ignition coil. Includes the grounding(earth) wire. Works with all Vespa Models.Please compare before purchasing. Dimensions:12mm plate thickness(18mm including fins)50mm eye to...

Piaggio Vespa Internal Light Coil

Replacement internal light coil. Includes the grounding(earth) wire. Works with all Vespa Models.Please compare before purchasing. Dimensions:12mm plate thickness(18mm including fins)50mm eye to...

Puch and Peugeot Internal Ignition Coil - 6 Volt

6 Volt internal ignition coil for Bosch style stators found on Puch, Peugeot, Zundapp, and Kreidler mopeds.Roughly 52-54mm Eye to eye. Recommended Accessories:Spark Plug CapSpark Plug Wire

Puch Internal Light Coil - 17 Watt

Replacement 6 volt 17 watt light coil for mopeds with Bosch style ignitions such as puch E50, ZA50, batavus M48 etc. 

Puch Internal Light Coil - 35 Watt

Upgraded 6 volt 35 watt light coil for mopeds with Bosch style ignitions such as puch E50, ZA50, batavus M48 etc. great upgrade over the stock lighting coil. Dimensions:53.7mm Eye to eye

Racing Spark Plug Cable / Cap, 90 Degree Threaded Post Terminal

This CR2 style is for using the threaded post / no nut.  If your spark plug has a nut most can be uncrewed to expose the threads and use this type of spark plug cap.  Low resistant racing...

Replacement Spark Plug boot / Cap, Small - Black

Replacement universal silicone spark plug cap. Use with terminal nut style plugs. Accepts 7mm spark plug wires.  Dimensions:46mm from spark wire to top of cap36mm from spark plug to top of...

Replacement Spark Plug boot / Cap, Small - Red

Replacement universal silicone spark plug cap. Use with terminal nut style plugs. Accepts 7mm spark plug wires.  Dimensions:46mm from spark wire to top of cap36mm from spark plug to top of...

Replacement Spark Plug boot / Cap, T shape - Red

Replacement universal silicone spark plug cap. Use with threaded terminal style spark plugs. You can remove the nipple on most spark plugs with a pair of pliers. Accepts 7mm spark plug wires...

Tail Light Assembly for Puch Tomos and more - CEV Style

Kinetic original, use this on Tomos, Puch, and many other mopeds. Consider this a universal tail light.Red sides Use on 6 or 12 volt systems.  Puch # 349.2.55.300.0Tomos # 222639Kinetic #...

Tomos / Kinetic Rectangular Moped Headlight - Large

Used on many mopeds, but mostly found on Tomos.Takes a 12v 35/35w BA20D bulb, not included.*Please be sure to check the below dimensions before purchasing. Dimensions:148mm(5.8")...

Tomos / Puch /Sachs Bosch Condenser - Screw On

 Bosch Style condenser. Fits Tomos A35 with Bosch / Iskra points ignition and various Puch powered mopeds with Bosch ignitions.  As well as Batavus and Sachs 505 engines. Screw on terminal...

Tomos Turn Signal Replacement - Sold Each

Replacement turn signal for Tomos mopeds. Can be used on other mopeds. 

Universal Tail Light Assembly - ULO Style

Replacement ULO style tail light assembly. Includes 12V 21W/5W bulb (BAY15D)

Universal Turn Signal - Tomos, Kinetic , Peugeot *Per piece*

Replacement turn signals. Perfect for Tomos, Kinetic and some Peugeot mopeds.  Will fit many other mopeds as well.  Wiring terminal connector modification may be necessary.Same as the...

Vespa Piaggio Ciao Condenser w/ 2 Wires

Vespa Piaggio Ciao Condenser with 2 leads. Be sure to compare first, this is only for Ciao models with the condenser on the outside of the engine case. Dimensions:18mm OD

Vespa Piaggio Horn Button w/ Lead - Yellow Ver. 2

Version 2 Vespa Piaggio horn button with lead. This is for the European models only. Perhaps you can fit it to usa versions or even a custom project. 27" lead.   Attaches to some...

Vespa Piaggio Ignition Coil with Spark Plug Wire - Blue

Replacement points ignition coil for Vespa Piaggio and Kinetic mopeds. Ciao, Bravo, Grillo, etc32mm eye to eye. Replaces Piaggio # 24411 Recommended Accessories:Spark Plug Boot

Vespa Piaggio Kinetic CDI & Ignition Coil w/ Wire (Ducati Style) - Black

Ducati style CDI box plus ignition coil with spark plug wire. Convenient all in one package for late model Vespa CDI mopeds or used with the Polini Speed Engine Case for CDI ignitions.Includes...