Moped Make / Model

EBR Double fork Stabilizer for Stock Puch Maxi Forks - Chrome

EBR double fork brace for you stock Puch Maxi forks.  Dimensions and details:6mm hole in top tab.5mm holes on lower mounts.About 85mm side-to-side for tire.62-64mm distance between lower mounts.

38mm Black Star Locking Gas Cap

1/4 Turn Locking Gas Cap with two keys. Fits top tank mopeds with 38mm openings such as Puch: Magnum, Monza, Free Spirit, Swinger, Pinto. Tomos: Targa LX. Trac, Zundapp, Kreidler and others.   Cap is 3.8 inches wide which may...

Universal Moped Springer seat - Neon Yellow

Comfortable springer seat for your moped.  Mounting hole 21.5mm inner diameter that is nearly universal for most mopeds with bicycle type seat mount.  No logo on this one so it is good for  any brand that fits, Puch Maxi / Newport,...

NOS Tomos Original Top Tank LX Decal Set - Black and Gold

New Old Stock decal set for top tank Tomos LX models. Fits years 03-06 Tomos # 230679

NOS CEV Tomos 40mph Speedometer - Black

NOS 40mph Tomos Speedometer found on older A3 models.(1987-91)  Can certainly work with newer A35, but make sure to check the cable size. M11 x .75 threadingUses 1.8mm inner cable end 60mm mounting diameter.  Tomos # 222006...

Honda Hobbit 40mm Stock Piston kit

Stock 40mm piston kit for Honda mopeds. Fits Hobbit, Camino, PA50 and most Express models like the NC50, NU50, NA50.Includes Piston, Wrist pin, Rings, and circlips.*Be sure to measure and compare before purchasing, we have been told you may need to shave...

30mm Black Locking Gas Cap, For Step Thru Mopeds

Locking 30mm gas cap for most step thru stye mopeds. Such as Tomos, Honda Hobbit and many others.  (Does not lock on the maxi.) Matte Black    

28mm Red and Chrome Metal Mesh Air Filter

 Metal mesh high flow design for long lasting and easy cleaning.  28mm internal diameter will clamp down 22mm-28mm. 24-29mm opening 64mm Overall length 51mm Small end diameter 60mm Large end diameter         Fits:...

Headlight Bulb 12V 25/25W PX15D Base

Quality dual filament lightbulbs. Can be used as a headlight. 12 volt 25/25 watt T19 bulb with a PX15D base (P15D25-1) Base is 15mm diameter, Tab/Flange is 25mm. Glass is 19mm diameter. Overall length is 46mm.   *Known to fit many Honda models...

PHVA 17.5mm Clone Carburetor with Pull choke

Clone Carburetor of the Dellorto PHVA 17.5mm. Excellent upgrade for Tomos A55 moped from the stock 14mm to a 17.5mm.  Works well with 50cc or 70cc setups.  Fits exactly the same as the stock carburetor so you can still use your oil...

Original Tomos " A35 " Decal - Blue with silver outline

NOS Sticker for your moped. Dark blue with a dark silver outline.   Dimensions 45 x 20mm tomos # 227739

Original Tomos Wrist Pin Bearing, 12 x 15 x 15

NOS original Tomos wrist pin bearing for the cranshaft connecting rod, commonly referred to as the con rod. This bearing will fit Tomos A35, A55 Puch, some Vespa and Peugeots, and many more moped con rods with a 12mm bearing. 12 x 15 x 15   12= I...

Motobecane Wrist Pin Bearing

 Motobecane wrist pin bearing 13 x 16 x 14mm

Motobecane AV7 Flywheel Cover - Black

 Motobecane AV7 flywheel cover, keeps moisture and dirt out.   Novi-ignition-style mopeds. About 124mm ID  Straps included.Accessories:Extra cover straps

Puch Side Cover / Panel Bolt "Long" 45mm

Puch moped side fairing 45mm long bolt. *Sold Eachfits puch mopeds like maxi, magnum, murray, freespirit, pinto, swinger, dart, etc...M5 x 0.8mm Threads

NOS Tomos Bulb Holder for lights in Dashboard

New old stock bulb holder for your turn signal and high beam indicator on your Tomos dashboard.   Tomos # 217679

Motobecane Crankshaft Seal Set

Seals for your crankshaft on your Motobecane moped.  AV7 or AV10 Includes 2 21mm x 4mm x 13mm

NOS Domino Brake Light Switch

NOS Domino Brake light switch. Also workds with Magura. This switch will turn your brake lights on when you pull your brake lever. Just the way we want it to.  Will fit all 2008 and up mopeds that use this switch.  6mm threads, threads are...

NOS Puch Za50 Starter Clutch Adjuster

NOS starter clutch adjuster for Puch 2-speed ZA50 engines.

Motobecane Engine Bearings and Seals Set - 6302

Engine Bearings for Motobecane mopeds like the AV7, AV10, AV88, 50v, and 51v.   Bearings are 16 x 42 x 13 - 6302/16

MLM Mopeds Honda Express na50 nc50 SHA Carburetor Intake

MLM Mopeds intake for the Honda express NC50 NA50. Lets you mount a 15mm Dellorto SHA carburetor. 38mm-eye to eye / 15mmID / 19OD   Recommended Accessories:  Lever Choke SHA Carburetor

Puch Athena 19mm Intake

Athena Intake for Puch E50 engines.  PHBG carburetors on ZA50 mopeds work with this intake as well. Square port.Made for clamp style carburetors like PHBG but will also fit the VM18. ID - 19MMOD - 24MM Recommended Accessories: Square...

Motobecane Original CDI Box

Original Stock 12V Motobecane CDI box.    Green - ignition coilRed - pickupOrange - high tension coilBlack/white - kill switch Black - ground    

Motobecane Speedometer Cable - 570mm (22.5")

Motobecane speedometer cable. 1.7mm inner cable ends / 22.5"L cable / 21.5" housing  

Motobecane AV10 50cc Complete Gasket Set

Motobecane 50cc complete gasket set for AV10 engines.    

Motobecane AV10 Engine Case 7mm Hardware Set

 7mm hardware set for the Motobecane AV10 engine case.   (5)75mm bolts / (1)80mm bolt / (1) 55mm Bolt / (7) washers and nuts  

Motobecane AV10 Complete Engine Case with Bearings, Seals, and Cylinder Studs,

Motobecane AV10 complete engine case w/ bearings, seals, and cylinder studs included. Build your own AV10! Bearing lubrication channels are present.     Recommended Accessories:  Case Hardware Complete Gasket Set Athena 50cc...

Motobecane AV7 50cc Cylinder Head W Decomp

Motobecane AV7 50cc cylinder head w/decomp - 38mm

Motobecane AV10 50cc Cylinder Head W Decomp

Motobecane AV10 cylinder head  w/decomp - 50cc - 39mm  

Puch e50 Top End Gasket Set- 46mm - 70cc

Puch e50  top end gasket set - 46mm - 70cc  

Honda Hobbit Front Brake Cable - 78.5"

Honda Hobbit front brake cable - 78.5" Cable stop is 15mmL by 8mm Diameter  

Puch Moped VDO Speedometer Cable - 60cm

Puch moped VDO speedometer cable - 60cm Inner cable is 1.6mm and the threads are 10mm *A little too short for a maxi/newport.  For stock applications, best to get the 70cm or larger*  

Puch Moped VDO Speedometer Cable - 70cm

Puch moped VDO speedometer cable - 70cm Inner cable is 1.6mm and threads are 10mm Perfect size for the Maxi, Newport and simialr models.  Too short for a Magnum.

Motobecane AV7 SHA and Amal Intake

Use this intake to mount 15mm , 16mm SHA style or Amal  15mm or 17mm carburetors onto the Motobecane AV7 type engines. Great upgrade over the stock Gurtner carburetor. ID=15mm OD=19mm 44-45mm eye to eye Tech Tip: You may need...

Tomos A35 / A55 Center Case Gasket

Tomos OEM A35 A55 center case gasket Thickness 0.35mm Tomos#  222098

NOS Tomos A3 Crankcase Gasket

Tomos A3 crankcase gasket  Thickness 0.35mm Tomos#  219368

NOS Tomos A3 Clutch Cover Gasket

NOS Tomos A3 clutch cover gasket  Thickness is  0.40mm Tomos#  209084

Tomos OEM Lef Black Mirror, 8mm 237309

OEM Tomos left side mount mirror with black metal backing and rubber lined mirror.4 inch diameter mirror. 8 inch long mirror mount shaft. designed to be threaded onto the mounting hole on your brake assembly.For Arrow, Streetmate Revival, LX, ST,...

NOS Tomos Side Cover for Left Hand Side - Silver

Tomos NOS OE silver side cover for the left hand side. fits top tank models like the TT bullet and LX   Tomos#  229616

NOS Tomos Dashboard / Speedometer Holder

NOS dashboard / speedometer holder for Tomos mopeds like the bullet, Colibri, LX, TT, Sprint, and Targa.   Speedom hole:  60mm  ID Ignition hole:  20mm  ID Mounting Width:  6.25"     Tomos#...