Puch

Inner Tube pair 2.00 X 17 PUCH *front & rear*

Quality motorcycle or moped tube.  Tubes will fit 2.00" - 2.50" tires on 16- 17" rims.  *This kit includes TWO of these tubes, one for each wheel.

Plastic Push In 30mm Gas Cap *no logo*

Push in vented gas cap with no logo.  Works on Puch Maxi N, Ktm/Foxi and similar step thru models who have a 30mm tank opening including the peugeot 102,103, motobecane mobylette, vespa ciao, bravo, Kinetic TFR, Derbi Variant. Sachs Hercules...

5" Round Chrome Headlight

5" round head for many mopeds. Such as the Puch Maxi, Magnum, Newport, Tomos, Garelli and loads more.    Does not come with bulb, but does come with mounting hardware and a ground wire.  Mounting width is 5.25"Takes BAX15D or BAY15D Style...

Kenda K260 17 x 2.25 Tire

The Kenda K260  is a  classic style tire and perfect replacement/upgrade for mopeds with 2.25-17  tires and some mopeds that originally had 2.00-17 size.   4PR 33L TT Rating Range B.  2 ply, Max load 254lbs.  This...

Kenda K201 17 x 2.25 Tire, Board Tracker Style

The Kenda K201 is a classic board tracker  firestone ribbed vintage chopper style tire that is a replacement/upgrade for mopeds with 2.25-17  tires and some mopeds that originally had 2.00-17 size.   4PR 33L TT Rating Range B...

Reed Valve Intake Gasket for Honda NSR, NS, MB5 and Puch AJH Reed Kits

Reed valve intake gasket for many Honda motorcycles like the NSR50, NSR50r, MB5, MB50, MBX, NS1 and NS50.  Also works with the Puch Athena AJH  style reed valve cylinder kits.  *Sold each, normally you need two*      

Puch Style 3 way Black Switch *Guia*

 Puch  style black switch.   3 way position for headlights, low beam/high beam/off.  Plus there is a button on the top and side that can be used for a horn or kill switch. Can be used on Puch or any other mopeds / motorcycles...

Universal Chrome Moped Pedal Arm s and cotter pins. *kit* 125mm

This kit includes:2 Pedal arms + 2 Cotter pins The universal chrome pedal crank arms. Works on almost all mopeds, and clears most performance exhausts. Great on Puch Magnums, Hondas, Tomos, Sachs, Motobecane, Peugeot. Pretty much everything with 16mm...

Puch 50cc 4p Cylinder Kit, DMP 38mm

Works wih any E50 engines found on various Puch engine mopeds like the maxi, newport, magnum, swinger, pinto, freespirit and many others.  Magnum ZA50 engines will need to use a Maxi flat flange style exhaust. 4 port, ight weight aluminum cylinder...

Puch 50cc 6p Racing Cylinder Kit, DMP 38mm

Works wih any E50 engines found on various Puch engine mopeds like the maxi, newport, magnum, swinger, pinto, freespirit and many others.  Magnum ZA50 engines will need to use a Maxi flat flange style exhaust.  6 ports cylinder with large...

Cylinder Stud m6 x 105mm for Puch *each*

Puch cylinder stud for E50 and ZA50 Engines. Works on the batavus laura m48 engine as well.*Sold each*Dimensions:M6 threading105mm Length

12mm Wrist Pin, NOS Tomos and Puch replacement

New old stock 12mm wrist pin. 12mm Diameter x 30.9mm Long This is good on Puch and Tomos 12mm con rods. Please measure and be sure you need this. *Might need a polish from years in a bag on the self but, no pitting, no scrapes, no issues...

CEV lens and bezel, NOS Puch Headlight Insert

New old stock CEV 216 lens with a 19783 bezel. Use these on CEV 19781 buckets with corresponding 3-hole bolt pattern. 6V - 21W" CEV  part # R2004910 OEM Puch Numbers: 38623 349.4.53.808.2

NOS CEV 210 Tail Light Lens for Puch / Tomos and more

CEV 210 Tail light lens for 19845 Tail light base.Use this on Tomos, Puch, and many other mopeds.  Even motorcycles like the Ducati pantah 500 & 600. *Does not have orange sides* Puch Part # 3492553062  - 349.4.55.806.2 Made in...

NOS CEV 210 Tail Light Assembly for Puch Tomos and more!

CEV Tail light assembly! Real NOS CEV product. This is the 210 Lens with a 19845 Base. Use this on Tomos, Puch, and many other mopeds. Consider this a universal tail light.* Red sides Uses Ba15s bulbs Use on 6 or 12 volt systems.  Puch #...

Mikuni TM24 Flatslide Spigot Carburetor

High quality Mikuni performance. Great carburetor for many heavily modified applications using a 70+ cc kit . Uses the same jets as the VM series carb. 44mm OD filter mount.31mm OD Spigot mount*Typically supplied with#130 main jet.#15 Piolet jet...

Puch DMP 45mm 70cc Complete Cylinder Kit

Giant transfers and 6 cylinder ports will give you a huge boost over stock and you will be doing over 50mph with proper tuning.  Light weight aluminum with Nikasil plating for long lasting usage and reliability. Works with all E50 engines found on...

Puch ZA50 Complete Original Starter Cable Assembly

This is a new original Puch Starter cable for your ZA50 engine.Made for the starter assemblies that accept cable barrel ends, NOT the screw in type. 41" overallRecommended Accessories:Adjuster ( Control End) **No longer included

Sedona Inner Tube pair 2.25 / 2.50 - 17 for Puch *front and rear*

High quality Sedona brand motorcycle or moped tube.  Talcum powder coated for easy installation   For 17 x 2.25 to 2.5in tires. Great fo Puch Maxi, Magnum, and Newport mopeds. Also found on most Peugeot, and Motobecane mopeds...

Puch Logo, Med. round decal - 3"

3" Puch logo sticker with thin text and a rounded shield. 

Puch Logo, Large round decal *style 1*

Puch logo sticker with large text and a pointed shield. 94mm or 3.7 inch diameter.

Puch E50 Engine Hardware Set

Hardware set for your Puch E50 powered mopeds like the Maxi, etc. Zinc plating for rust resistance. Package includes:  (8) M6 x 31mm, (5) M6 x 55mm engine case allen bolts (4) M6 x 25mm clutch cover countersunk allen bolts (2) M6...

Steyr-Daimler-Puch Logo Decal

Steyr-Daimler-Puch Logo Sticker. 86mm long by 56 wide or 3.4 inches long by 2.2 inches wide.

Puch Homeland Sticker Mixer

(1) One awesome little Puch logo sticker. 45mm or 1.77 inch diameter. (2) Puch text above the Steyr Coat of Arms. This is from way back, Looks great! 86mm long by 56 wide or 3.4 inches long by 2.2 inches wide. (3) Puch moped logo inside...

Puch Eagle Wings Decal

Another sweet throw back sticker.This is the Austrian national bird the black eagle. 86mm long by 56 wide or 3.4 inches long by 2.2 inches wide.

Puch Text Above Steyr Coat of Arms Decal

Puch text above the Steyr Coat of Arms. This is from way back, Looks great! 86mm long by 56 wide or 3.4 inches long by 2.2 inches wide.

Puch Logo inside Austrian flag Decal

Puch moped logo inside of the Austrian flag. Represent your moped's homeland.  86mm long by 56 wide or 3.4 inches long by 2.2 inches wide.

Puch Logo, Small round decal - 2"

One awesome little Puch logo sticker. 2" diamter

Intake Gasket - 21mm Inner Diameter for Derbi, Minarelli, and Puch

This gasket is used on Minarelli, Derbi, and Puch PISTON PORT engine equipped mopeds.   Super duper tech specs: 21mm ID x .01 thick x 38mm center eye to center eye... 25mm inner eye edges and 44mm outer eye edges.

Puch 70cc AJH Reed Valve Gasket Set

Quality gasket set for the AJH cylinder kit. Includes: Intake, base, head, and exhaust gaskets.   Recommended Accessories: Puch 70cc AJH Cylinder kit

12mm Bing Clone Carburetor for Puch (style 2)

Great replacement clone of the Bing for  Puch powered mopeds like the maxi, magnum, newport, swinger, dart, murray, bombardier, pinto, etc.  Does not use original bing jets.  Best solution is to swap the orginal atomizer with your old...

CEV Headlight Bezel for all standard CEV Buckets 04522

CEV Headlight rim/bezel. 105mm  Fits all CEV bullet and standard headlight buckets, as found on Puch, Peugeot, Italian bikes, and many more. Part # 04522 and or CEV # 105 Made in Italy Recommended Accessories : 6v Sealed Bulb 12v Sealed...

CEV Keyed Ignition Switch

CEV keyed ignition switch for your moped or small motorcycle project. Came stock on a large amount of mopeds including Vespa models. Nice and classic.   Sized to fit in holes 12.5mm up to 16mm.

Puch VDO Style Speedometer Drive. *Right*

Generic VDO style speedometer drive for Puch mopeds. 12mm axle hole10mm cable threadsFits 1.6mm speedo cable *Measure and compare yours for best fitment. Right hand Fitment.  

11mm x 200mm Loose Bearing Axle Complete Kit

Comes with axle, caged wheel bearings, cones, nuts and washers.  Perfect for Puch front or rear wheels.  Snowflake, spokes, five stars.   Will also work on many other applications.  Measure first buy second.  11mm diameter x...

NOS CEV Puch Maxi / Newport Headlight *Grey*

 Super rare NOS original CEV rectangle / Euro style headlight. This  version was normally found on Puch Maxi / Newport,  Solo, Moto Guzzi, Benelli,  Zundapps and Hercules mopeds.  Can be used with many other mopeds...

NOS CEV Puch Maxi / Newport Headlight *baby blue*

Super rare NOS original CEV rectangle / Euro style headlight. This  version was normally found on Puch Maxi / Newport,  Solo, Moto Guzzi, Benelli,  Zundapps and Hercules mopeds.  Can be used with many other mopeds.  Bolt...

CEV 2152u 5" Headlight. Low / High Beam Non-Sealed Type

New Old Stock CEV  Headlight.  Extremely rare dual filament, high low beam type.  Fits most mopeds and is 5" wide mount to mount.  Like Puch,KTM,  Foxi and many others. BULBS NOT INCLUDED Top qualtiy metal head light...

Puch Maxi Cable Guide/Cover *Black*

Black plastic cable guide cover for the Puch Maxi, Newport and similar models.    Recommended Accessories: Side Panels

Puch Carburetor Rebuild kit, Bing 12mm/15mm - Round

A rebuild kit for round Bing 12 and 15 millimeter carburetors.Great option for those who want to rebuild rather than buy a replacement.These carburetors were found on most Puch powered mopeds like the maxi, magnum, Newport, swinger, dart, Murray,...