Air and Fuel

Tomos A35 Replacement Reed Valve

Replacement reed valve set up for Tomos A35 and Peugeot 103. Certainly an upgrade over stock, but not a high performance option.

OEM Tomos 12mmLeft Flow Fuel Petcock W/ Extended Knob

Original OEM Tomos Targa petcock. (not for Targa LX)  Can be used for a Vespa Grande as well.12mm threadsFuel flows left for a 6mm fuel line.   Roughly 35mm extension.Tomos Part # 229169  *12mm threads means you can put this on many...

Tomos A35 / Peugeot / Puch Athena Carbon Fiber Reed Valve

Athena reed valve kit for the Tomos A35, Peugeot 103 engines as well as the Puch Polini Reed  valve cylinder.   Bigger opening for more air flow and top quality carbon fiber reeds for optimal performance and reliability.   0.3mm...

Dellorto SHA Carburetor Float Chamber

Dellorto Float chamber with the gasket for SHA carburetors. This is intended for carburetors 14mm to 16mm, these carburetors came stock on many A35 Tomos models.Often called the Float bowl in America.Black Plastic Tomos Part # 219595

6mm Small Paper Fuel Filter

Paper filters trap the finest particles.  Best to run a in line filter on all moped, scooters, motorcycles, atv's, quads, etc.  Catch debris from entering your carburetor and save yourself from a bad day.Height:55mmFuel...

OMG Fuel Petcock 12mm x 1.00mm, Rear Flow with Bowl

Top quality OMG petcock with on / off / reserve (new versions have the position stamped on dial)  for 5mm fuel line 12mm x 1mm female thread coupler nut.  Also has clear sediment bowl and filter for extra protection and convenience. *The...

OMG 12mm x 1mm Right Flow Fuel Petcock - Round Knob

Top quality OMG right flow petcock for many mopeds, same 12mm thread as Sachs Hercules, Columbia Commuter,  Tomos Revival,  Streetmate,Targa, Targa LX, Sprint, Flexer, Arrow, Honda hobbit, camino, PA50, PA50II, vespa bravo, puch swinger,...

OMG 12mm x 1.00mm Right Flow Fuel Petcock

Top quality OMG Right Flow petcock for many mopeds, same 12mm thread as Sachs Hercules, Canadian Moppet(Stepthru late 70s), Columbia Commuter,  Tomos Revival,  Streetmate,Targa, Targa LX, Sprint, Flexer, Arrow, Honda hobbit, camino, PA50,...

OMG 12mm x 1.00mm Left Flow Fuel Petcock

Top quality OMG left flow petcock for many mopeds, same 12mm thread as Tomos Revival,  Streetmate,Targa, Targa LX, Sprint, Flexer, Arrow, Honda hobbit, camino, PA50, PA50II, vespa bravo, puch swinger, puch freespirit, puch pinto, batavus hs50...

Dellorto SHA 14-16mm Carburetor Air Filter Cover Clip 6235

Air filter cover clip  for the Dellorto SHA  14.12, 14.14,  15.15 and 16.16 and similar. Also works with clone carbuetors.   Dellorto # 6235  

Dellorto SHA 14-16mm Carburetor Air Filter 6117

Air filter  for the Dellorto SHA  14.12, 14.14,  15.15 and 16.16 and similar. Also works with clone carburetors.   Dellorto # 6117  

Dellorto SHA 14-16mm Carburetor Air Filter Cover 6183

Air filter cover for the Dellorto SHA  14.12, 14.14,  15.15 and 16.16 and similar. Also works with clone carbuetors.   Dellorto # 6183  

Dellorto SHA 14-16mm Carburetor Rebuild Kit, Tomos

Complete gasket rebuild kit for SHA carburetors  14.12, 14.14,  15.15 and 16.16 and similar. Also works with clone carbuetors.   Dellorto # 52533   Suitable replacement for Tomos Part # 219875 

Dellorto 16.16 SHA Carburetor, Cable Choke

Great upgrade for Motobecane and Peugeot mopeds. Pairs well with 70cc kits as well. Internal mounting diameter is 19mm.  Dellorto # 2150 Recommended Accessories: 5mm Main Jets Throttle / Choke Cable

OEM Tomos Dellorto 14.12P SHA Lever Choke Carburetor 230260

Original Tomos carburetor found on the Tomos A35 engine standard on the sprint, targa, targa lx, mc50, flexxer, classic tt, quadro and similar engine models. The same carburetor was also found original on most Garelli, Minarelli and can be also be used...

PHBG 19mm DS Black Racing Carburetor - CLONE

Nice quality clone of the Dellorto PHBG Racing Edition Carburetor.  The most noticable feature of the 19mm carb (type PHBG) is its black color. The metal float bowl is equipped with a central screw that allows you to easily change the main jet...

Tomos A35 / Peugeot / Puch Polini Carbon Fiber Reed Valve

Puch Polini reed valve kit. Also fits the Tomos A35 and Peugeot 103 engines.  Comes with carbon reeds and 2 new gaskets for easy install. Bigger opening for more air flow and great quality reeds for optimal performance and reliability.

Dellorto SHA Carburetor 1.5mm Intake Shim for Tomos

1.5mm thick shim for SHA carburetors.  14.12, 15.15, 16.16 . . . Does not fit old model 14.12 Carburetors that came on Tomos A3 and some early moped A35s.  Inspect and measure  yours before ordering! The correct size for the  Tomos...

OMG 12mm x 1.00mm Fuel Petcock, Left Flow - Round Knob

Tomos OMG left flow petcock with big knob that fits many mopeds, same 12mm thread as Tomos Revival,  Streetmate, Targa, Targa Lx,  Flexer, Arrow, Honda hobbit, camino, PA50, PA50II, vespa bravo, puch swinger, puch freespirit, puch pinto,...

Dellorto 15.15 SHA Carburetor with Lever Choke

The Dellorto SHA is a great replacement to many stock carburetors and is an upgrade from the stock carburetor found on many mopeds. This will work with many different brands, including Tomos, Garelli, Motobecane, Morini based, and Minarelli based mopeds...

Universal 6mm Exhaust / Intake Studs *Sold Each*

These 6mm engine studs are for almost all cylinders and kits, and can be used for exhaust and intake.   6mm x 30mm

60mm Clear Cover Air Filter, fits SHA Style Carburetors

Metal Mesh, K & N style Hi Flow air filter for the SHA 14.12- 16.16 carburetors OD = 74mmID = 60mmlength = 81mm Perfect for Tomos, Garelli and other mopeds that use this type of carburetor. Include plastic clear cover to keep the elements out...

Tomos A35 15mm intake, With Oil Injection

Stock style intake from the Targa LX but with 15mm internal diameter instead of 14mm. Upgrade yours or use it on other Tomos models that has the hard to access straight intake. Works with the stock 14.12 SHA carburetor as well as the 15mm and 16mm. You...

Fuel Petcock 12mm x 1.00mm for Tomos Mopeds and others

Left flow petcock with big knob for LOTS of mopeds, same 12mm thread as Tomos Revival,  Streetmate, Targa, Targa Lx,  Flexer, Arrow, Honda hobbit, camino, PA50, PA50II, vespa bravo, puch swinger, puch freespirit, puch pinto, batavus hs50...

Polini 5mm Jet Assortment 90-99 for Dellorto PHBG and SHA Carburetors

  Jet Assortment of 10 for Dellorto PHBG and SHA carburetors. 90,91,92,93,94,95,96,97,98,99 Jets included Made in Italy by Polini Polini # 360.0005

Polini 5mm Jet Assortment 80-89 for Dellorto PHBG and SHA Carburetors

  Jet Assortment of 10 for Dellorto PHBG and SHA carburetors. 80,81,82,83,84,85,86,87,88,89 Jets included Made in Italy by Polini Polini # 360.0004

Polini 5mm Jet Assortment 60-78 for Dellorto PHBG and SHA Carburetors

  Jet Assortment of 10 for Dellorto PHBG and SHA carburetors. 60,62,64,66,68,70,72,74,76,78 Jets included Made in Italy by Polini Polini # 360.0003

OMG Fuel Petcock 12mm x 1.00mm Left Flow

Left flow petcock for LOTS of mopeds, same 12mm thread as Tomos Revival,  Streetmate,Targa, Targa LX, Sprint, Flexer, Arrow, Honda hobbit, camino, PA50, PA50II, vespa bravo, puch swinger, puch freespirit, puch pinto, batavus hs50 and many more...

Tomos A35 Weak-ends Racing Intake for PHBG Carburetors

Tomos A35 PHBG Racing Intake.  Works with 19mm or 21mm size PHBG models.  Fits snuggly between frame and cylinder with rubber intake manifold (not included)  No bends = better flow and more power. Handmade and  finished  in a...

Dellorto SHA Fuel Filter Screen for 14mm-16mm Carburetors

Round internal fuel filter for the larger size dellorto SHA carburetors 14mm - 16mm. for sizes like 14.12, 15.15, 16.16 that are commonly found on Tomos A35 and Garelli mopeds Tomos Part # 219585 Dellorto # 6109

Dellorto 16.16 SHA Carburetor, Lever Choke

Great upgrade for Tomos, Garelli and Peugeot mopeds. Pairs well with 70cc kits as well. Internal mounting diameter is 19mm. You will need a smaller 18mm shim to fit on Tomos intakes.

Delloroto Float Needle SHA PHBG Carburetors

Float needle for Dellorto SHA and PHBG carburetors. Use this along with a new gasket to fix annoying leaks.Tomos # 219589 Dellorto # 2838

Dellorto SHA Float Bowl Gasket, Tomos Vespa Mopeds

Fix your leaking bowl with a new gasket. Fits all SHA type carburetors.

Airsal Tomos A35 Reed Valve. Also fits Peugeot 103

Tomos A35 Airsal replacement reed valve with fiberglass reeds. Fits on original or Airsal cylinder kits.   Will also work on the Peugeot 103 and with the Puch Polini Reed Kit.   Recommended Accessories:     Intake Gasket...

Tomos A35 14mm intake with Oil Injection

Stock style intake for the Targa LX. Use it on your Tomos model that has the hard to access straight style. Works with the stock 14.12 SHA carburetor as well as the 15mm and 16mm.  This version is with 14mm I.D. diameter, with oil injection hole...

21mm PHBG intake for Tomos A35

21mm PHBG intake for your Tomos A35. This will allow you put on one of the best carburetors out there. Dellorto PHBG clamp on or  spigot mount (rubber manifold) type for 19mm or 21mm carburetors. Can even work with a PHVA.  Allows for best...

Fuel Petcock 12mm x 1.00mm Left Flow for Tomos, Honda, Puch and others.

Left flow petcock for LOTS of mopeds, same 12mm thread as Tomos, Honda hobbit, camino, PA50, PA50II, vespa bravo, puch swinger, puch freespirit, puch pinto, batavus hs50 and many more. fuel flows to the left - for 6mm fuel line 12mm thread

Fuel Petcock 12mm x 1.00mm, Rear Flow with Bowl

Rear flow style petcock with removable metal bowl.  This helps catches larger debris and prevents it from entering the carburetor. Perfect for Honda hobbit, camino, PA50, PA50ii and garelli VIP, katia, eureka, gulp and flex mopeds + this 12mm size...

OEM Tomos Intake Manifold Straight for SHA Carburetors

OEM straight intake for Tomos mopeds with A35 engines.  Tomos Part # 223603 18mm O.D. 15mm I.D.

60mm Chrome Metal Mesh Air Filter, fits SHA Style Carburetors

Metal Mesh, K & N style Hi Flow air filter for the SHA 10- 16.16 carburetors. Perfect for Tomos, Garelli and other mopeds that use this type of carburetor.OD 74mmID 60mm length 81mm