Air / Fuel / Intake

Original Dellorto SHA Air Filter, Cover and Clip

This it the stock air filter and cover for the Dellorto SHA style carburetor. It will work on the SHA 14.9, 14.12, 14.14, 15.15, 16.16. This filter is found commonly on Italian mopeds, and Tomos A35 models with the Dellorto carb.  To replace...

Dellorto 16.16 SHA Carburetor, Cable Choke

Great upgrade for Motobecane and Peugeot mopeds. Pairs well with 70cc kits as well. Internal mounting diameter is 19mm.  Dellorto # 2150 Recommended Accessories: 5mm Main Jets Throttle / Choke Cable

OEM Tomos Dellorto 14.12P SHA Lever Choke Carburetor 230260

Original Tomos carburetor found on the Tomos A35 engine standard on the sprint, targa, targa lx, mc50, flexxer, classic tt, quadro and similar engine models. The same carburetor was also found original on most Garelli, Minarelli and can be also be used...

PHBG 19mm DS Black Racing Carburetor - CLONE

Nice quality clone of the Dellorto PHBG Racing Edition Carburetor.  The most noticable feature of the 19mm carb (type PHBG) is its black color. The metal float bowl is equipped with a central screw that allows you to easily change the main jet...

Puch 15mm Intake for Bing Carburetors - Sqaurere Port

Square port 15mm intake for Puch Maxi, Newport, Magnum and similar mopeds Puch based engines.Works with stock carburetor or 15mm for increased air flow.Dimensions:15mm O.D.20mm O.D.8mm Thick flange54mm Overall height Recommended...

Tomos A35 / Peugeot / Puch Polini Carbon Fiber Reed Valve

Puch Polini reed valve kit. Also fits the Tomos A35 and Peugeot 103 engines.  Comes with carbon reeds and 2 new gaskets for easy install. Bigger opening for more air flow and great quality reeds for optimal performance and reliability.

Malossi Stainless Steel Metal Clamp for Rubber Intake Couplers

 Stainless steel hose clamp by Malossi.  Made for intakes, but can be used on exhaust shields, brackets, header wrap etc. 25- 50mm Diameter 8mm Wide   Malossi Part #111-6220   Recommended Accessorires: Rubber Intake Coupler

Malossi PHBG & PHVA Rubber Intake Coupler

Specially designed for mounting 15-21mm PHBG and PHVA DS style carburetors 24mm Intake Side25mm Carburetor Side with groove to mate with carburetor for perfect seal37mm long Malossi Part # 13 6085 Recommended Accessories:Metal Clamps  

Dellorto PHVA 17.5mm ED Carburetor 1407

Excellent carburetor upgrade for Tomos A55 mopeds. Move from the stock 14mm to a increased 17.5mm.  Works well with 50cc or 70cc setups.  Fits exactly the same as the stock carburetor so you can still use your oil injection and airbox.Features...

Dellorto SHA Carburetor 1.5mm Intake Shim for Tomos

1.5mm thick shim for SHA carburetors.  14.12, 15.15, 16.16 . . . Does not fit old model 14.12 Carburetors that came on Tomos A3 and some early moped A35s.  Inspect and measure  yours before ordering! The correct size for the  Tomos...

OMG 12mm x 1.00mm Fuel Petcock, Left Flow - Round Knob

Tomos OMG left flow petcock with big knob that fits many mopeds, same 12mm thread as Tomos Revival,  Streetmate, Targa, Targa Lx,  Flexer, Arrow, Honda hobbit, camino, PA50, PA50II, vespa bravo, puch swinger, puch freespirit, puch pinto,...

Dellorto 19mm PHBG BS Carburetor / Pull Choke - New Model*

Spigot mount 19mm PHBG BS carburetor.  Equipped with three jets, an air mixture screw, for endless tuning possibilities thanks to a wide variety of needles, throttle slides, jets, etc. Solving many of the issues with old  carbs on motobecane,...

Dellorto 21mm PHBG BS Carburetor with Pull Choke

This type of  PHBG carbs that mount with rubber intake manifold to the intake. This style of mounting can reduce vibrations to the carb and be a little tighter and less prone to air leaks than a clamp style carb that doesn't quite match up. These...

Dellorto 15.15 SHA Carburetor with Lever Choke

The Dellorto SHA is a great replacement to many stock carburetors and is an upgrade from the stock carburetor found on many mopeds. This will work with many different brands, including Tomos, Garelli, Motobecane, Morini based, and Minarelli based mopeds...

Dellorto 15.15 SHA Carburetor with Cable Choke for Motobecane and others.

The Dellorto SHA 15.15 is a great replacement to many stock carburetors and is an upgrade from the traditional SHA 14.12 carb found on most stock mopeds. This will bolt up to many different brands, including Tomos, Garelli, Motobecane, Morini based, and...

60mm Clear Cover Air Filter, fits SHA Style Carburetors

Metal Mesh, K & N style Hi Flow air filter for the SHA 14.12- 16.16 carburetors OD = 74mmID = 60mmlength = 81mm Perfect for Tomos, Garelli and other mopeds that use this type of carburetor. Include plastic clear cover to keep the elements out...

Tomos A55 PHVA Carburetor Speed Upgrade Kit, Air Filter and Jets *Red Filter*

Speed upgrade kit for your Tomos A55 LX, Arrow, Revival, Spint, ST, and Streetmate.  Almost every Tomos A55 based moped will really benefit from this.  Works great to de-restrict stock setup.  Increased performance with after market...

Ciao-Mix Red Choke Lever for Dellorto SHA Carburetor

Choke lever for Ciao - Mix. Will fit others with similar Dellorto 10-13mm SHA Carburetor along with plastic fitting.

Dellorto 10-13mm SHA Air Filter Screen, Vespa /Piaggio /Kinetic

Replace your dirty or lost air filter screens.  Fits all moped with the 10-13mm Dellorto SHA carburetor.  Like the Vespa Ciao, Grande, Ciao-Mix, Bravo, Kinetic TFR and similar models.  

Fuel Petcock, for Puch Maxi, Newport and Vespa Ciao

Puch Maxi / Newport style petcock.   

Dellorto SHA Carburetor Rebuild Kit Vespa, Piaggio, Kinetic Mopeds

Dellorto SHA 12-13mm Carburetor Rebuild Kit for Vespa /Piaggio, Bravo, Boxer, Ciao, Grillo, SI Kinetic TFR mopeds with similar carburetor. Includes:  Float, Float Pin, Float Needle,  Bowl Gasket, Idle Adjuster, Spring, #50...

20mm UNI Foam Air Filter for Puch Bing Carburetors

High flow clamp on foam filter with flex core inner spring allows the filter to fit in confined areas and hold its shape for longer life.   Perfect size for Puch Bing Carburetors. 12mm, 14mm or 15mm,  20mm internal diameter

28mm UNI Black Foam Air Filter for Puch Bing Carburetors

High flow clamp on foam filter with flex core inner spring allows the filter to fit in confined areas and hold its shape for longer life.   Our go to filter for best performance. Will work on 20mm to 28mm diameter mounting flanges.

Carbon Fiber Reed Set for Athena AJH Reed kits, Puch, Gila, NSR50 and MB5

2 x 2 petal carbon fiber reed set for NSR50, NS-1, Puch Gilardoni Kit and also will work on the MB5 and Puch Athena AJH kits as well as many Minarelli engine based scooters.  

Polini Carbon Fiber Reed for Honda MB5, Puch Athena AJH

Polini 2 petal Polini Carbon Fiber Reed for Puch Athena AJH Kits, Honda MB5, NS1 and NS50F like  THIS..3mm ThickComes with only one reed as shown.Polini Part # 213.0520 Tech Tip: Use Red Loctite on screws when installing.

28mm Chrome Metal Mesh Air Filter for MB5, AR50, CB50, RD50, GT50

 Metal mesh high flow design for iong lasting and easy cleaning. 28mm internal diameter will clamp down 22mm-28mm. Fits: Honda MB5, CB50         Kawasaki AR50         Yamaha RD50, DT50, MX50    ...

Tomos A35 15mm intake, With Oil Injection

Stock style intake from the Targa LX but with 15mm internal diameter instead of 14mm. Upgrade yours or use it on other Tomos models that has the hard to access straight intake. Works with the stock 14.12 SHA carburetor as well as the 15mm and 16mm. You...

Mikuni VM20 Carburetor

High quality Japanese Mikuni performance.  Great carburetor for many applications. Such as the Honda Hobbit, MBR, NSR50 and many more. Flange mounting style.   Custom or modified intake may be  needed. Use the same jets as the TM...

OMG Motobecane AV7 AV85, AV88, AV89 Fuel Petcock

Top quality OMG fuel petcock for the Motobecane AV78, AV88 Riverside Wards step thru mopeds and similar models. Comes with everything shown. Made in Italy! Recommended Accessories: Inline Fuel Filter

Fuel Petcock 12mm x 1.00mm for Tomos Mopeds and others

Left flow petcock with big knob for LOTS of mopeds, same 12mm thread as Tomos Revival,  Streetmate, Targa, Targa Lx,  Flexer, Arrow, Honda hobbit, camino, PA50, PA50II, vespa bravo, puch swinger, puch freespirit, puch pinto, batavus hs50...

Red Handle Fuel Petcock 16mm x 1.00mm

Fits Puch magnum, Columbia Commuter,  and any other moped or motorcycle with 16mm x 1mm threading + use this on many different vintage motorcycles like guzzi, betamotor, ducati, fantic motor, benelli, aprillia, simpson, ktm, husqvarna, adler, ardie,...

Polini 5mm Jet Assortment 90-99 for Dellorto PHBG and SHA Carburetors

  Jet Assortment of 10 for Dellorto PHBG and SHA carburetors. 90,91,92,93,94,95,96,97,98,99 Jets included Made in Italy by Polini Polini # 360.0005

Polini 5mm Jet Assortment 80-89 for Dellorto PHBG and SHA Carburetors

  Jet Assortment of 10 for Dellorto PHBG and SHA carburetors. 80,81,82,83,84,85,86,87,88,89 Jets included Made in Italy by Polini Polini # 360.0004

Polini 5mm Jet Assortment 60-78 for Dellorto PHBG and SHA Carburetors

  Jet Assortment of 10 for Dellorto PHBG and SHA carburetors. 60,62,64,66,68,70,72,74,76,78 Jets included Made in Italy by Polini Polini # 360.0003

Vespa / Piaggio Ciao, Petcock by CIF

 Petcock specifically for Vespa /  Piaggio Ciao and others. on / off / reserve fuel flows straight down - for 6mm fuel line 12mm x 1mm female thread coupler nut. Made in Italy by CIF   Recommended Accessories: In-line fuel...

Vespa / Piaggio Ciao Petcock

petcock specifically for Vespa /  Viaggio Ciao mopeds. on / off / reserve fuel flows straight down - for 6mm fuel line 12mm x 1mm female thread coupler nut.  *May be gold, may not be.  Recommended Accessories: In-line fuel...

Original Style VESPA / PIAGGIO Air Filter / Air Box

Top quality original style replacement air filter box. Perfect clone of the original Piaggio # 1GM5322Seg or DGM35718S  Fits Piaggio, Vespa, Kinetic mopeds like the Ciao, Grande, Bravo, TFR, Boxer, Citta, Grillo,  Magnum with the 12-13mm...

12mm SHA Clone Carburetor for Vespa, Piaggio- LONG LEVER

12mm Dellorto SHA clone moped Carburetor For Vespa, Piaggio and possibly Kinetic mopeds. 

12mm SHA clone Carburetor for Vespa, Piaggio, Kinetic,

12.12  SHA Clone Carburetor Such a good clone it even has Dellorto stamped on it.   For Vespa, Piaggio and some Kinetic mopeds.  Like the Bravo, Grande, Si, Ciao and TFR.  This style has a bendy 90 degree cable router...

Piaggio Vespa SI, Grande petcock

OMG brand fuel petcock for your Piaggio Vespa SI mopeds.  As well as other mopeds you need a long lever for like the Vespa Grande. *keep in mind the direction of the barb direction as you may need longer fuel line. Using new line is always...