Hardware

Original Kinetic Plastic Washer - 12.5 x 22 x 1.5

Original Kinetic plastic washer. Can be used where ever needed. Dimensions:12.5mm ID22mm OD1.5mm Thickness

Original Kinetic Magneto Wire Rubber Grommet

Original Kinetic moped Magneto wire rubber grommet. Dimensions:28mm overall17mm wide7.5 thick Kinetic # 18106410

Moped Axle Nut M12 x 1mm Threading , 19mm Hex

M12 x 1mm thread hex nut. Fits many mopeds such as Tomos APN.Dimensions:19mm Hex head9.6mm thick

Motobecane Internal Clutch / Crank Shim / Washer

Spacer / washer / shim for Motobecane clutch / variators. Fits Motobecane, Kinetic, Vespa Piaggio, Puch and Tomos moped cranks.**Be sure to check specsDimensions:15.5mm ID20.5mm OD0.4mm Thick

SHA Carburetor Top Screw - M4 x 12mm

Original Kinetic SHA M4 carb top screw. Should fit all SHA carb tops. Please compare before purchasing.Dimensions:M4 x 1 threading12mm overall Length10mm thread length  Kinetic # 03159370

NOS Motobecane Handlebar Clamp / Mount Kit - Chrome

Original Motobecane handlebar clamp / mounting kit. ChromeIncludes what you see, (2 u-bolts, 2 risers, 4 washers, 4 nuts.)This will fit Kinetic mopeds though it will raise the handlebars by roughly 12mm. Motobecane # 20971Made in France.

Original Kinetic M6 Spring / Lock Washer - Universal

Original Kinetic moped M6 split lock / spring washer. Many uses.Dimensions:M611mm ODKinetic # 18338-KG8-900Tomos # 031840

Original Kinetic washer / Spacer / Shim - Vespa Piaggio

Original Kinetic  spacer / washer / shim. **Be sure to check specs, as this will not fit the standard 16mm crank spindle.Dimensions:15.5mm ID20.5mm OD0.4mm ThickKinetic # 03144020 Recommended Accessories:OEM Kinetic Crank

Original Kinetic Acorn / Cap Nut - M8 x 1.25. (Puch Shock Nut)

Original Kinetic Acorn nut. Use anywhere you need. Will fit Puch shocks and Tomos Forks as well. Bulk discount pricing apply. Buy more and save, save, save. Dimensions:M8 x 1.25 Threading13mm Hex15mm Height Kinetic # 93608001Tomos # 030019

Original Kinetic M8 X 1.25 Nut, 17mm Hex - Flat

Original Kinetic M8 x 1.25 thread Hex head flat style nut.  Bulk discount pricing apply. Buy more and save, save, save.17mm head6.3mm thick

Original Kinetic Shock Mount Hardware Kit - Top

Hardware for mounting the top of you Kinetic moped's shocks. Kit Includes: (All M8)2 x Acorn nuts2 x Lock washers2 x Flat washers2 x Very thin plastic spacers (Most are yellow and oblong from casting and storage)   Recommended...

Original Kinetic Shock Mount Bolt - Top

 Original Kinetic shock mount bolt. Keeps the tops of your shocks in place. Will fit Kinetic TFR(all models) and Magnum mopeds. This will also fit Puch Maxi mopeds. Will not fit Puch Magnum or Puch Freespirit.  Dimensions:193mm Long8mm...

Motobecane AV7 Engine Spring Bracket Set

New Motobecane spring bracket for the AV7 engines. The Av10 stock engine is not the same style bracket.

Original Kinetic M8 X 1.25 Clutch Nut, 17mm Hex - Beveled

Original Kinetic M8 x 1.25 thread Hex style clutch nut.*Nut is beveled on the other side to seat with the shape of the clutch.   17mm head8mm thick Kinetic # 03168080

Moped Axle Nut M11 Thread, 17mm Hex

M11 x 1mm thread hex nut. Fits all year Tomos mopeds except Arrow and Streetmate mopeds.Dimensions:17mm Hex head7.5mm thick Tomos # 209277

Tomos / Universal Cylinder Stud, M7 / M8 x 112mm *Each

Cylinder stud for custom projects, perhaps upgrade your Tomos cylinder studs, may need to bore cylinder stud hole and or dremel fins to clear room for 8mm head nut.One side is M7 thread, the other side is M8. *Sold each.*Please compare yours before...

Tomos M22 Front Sprocket Nut + Seal Upgrade

M22 front sprocket nut plus seal upgrade for all Tomos A3, A35, A55 mopeds. The original nut is well known to leak. This upgraded nut + seal stops the leak. Dimensions:30mm Hex15mm ThickM22 x 1mm thread Tomos # 234388Grab some Fluids for when the...

Tomos Front Sprocket Protective Washer - A3, A35, A55

Tomos front sprocket protective washer. Fits all year Tomos mopeds. Dimensions:22mm ID x 45mm OD Tomos # 209079

Motobecane Flywheel Nut, Regular Threading - 11mm x 1mm

New flywheel nut for Motobecane AV7, AV10, and 50V mopeds.Tightens clockwise / to the right.11mm x 1mm Threading.12.5mm overall - 7mm not including head.

Vespa Piaggio Si, Bravo, Grande Moped Side Cover Mounting Bolt Kit

Side cover mounting hardware for Vespa Piaggio SI and Bravo mopeds. Fits all locations for the SI, but only the rear locations on Bravo and Grande.Dimensions:38mm bolt length (44mm including head)6mm head thickness18mm head OD17.5mm OD spring33mm...

Kinetic Moped Magneto / Flywheel Nut -

Original Flywheel aka magneto rotor nut. Kinetic # 05168250 Dimensions:14mm L x 15mm OD

Motobecane Flywheel Cover Rubber Tab / Strap - Per piece

New little rubber strap that keeps your flywheel cover on. Sold per piece, each flywheel requires 2.

Motobecane Cylinder Stud Set M7 x 128mm

MBK stud set. M7 x 128mm. Lock tight coating. Fits AV7 + Av10 cases. One end for the case, one end for the head.   

Piaggio Vespa Headset / Steering Stem Bearing Kit - Ciao Bravo Grande

Headset made for Piaggio Vespa Ciao Bravo and Grande mopeds. You must check your specs before ordering as some models do not use these special inverted cups. It could even be used to mount different forks on your mopeds etc.  Head tube - 25mm...

Short Brass M6 Nut for most Exhausts, Cylinders, Intakes, Etc. *Sold Each*

Brass M6 thread 5mm tall.This is the most common nut found on your moped. It is called 6mm, or M6 in metric. If you have a 10mm wrench or socket, and it fits the nut you need, this is it.Used on exhaust studs, head bolts, intakes and e many other...

Universal Complete Cylinder Stud / Washer / Nut Set m7 x 115mm

 Universal Cylinder stud set. Includes washers and nuts. Nuts have convenient cap to prevent rust. Replaces Tomos cylinder studs for A35 and A3 models. Also good for Peugeot mopeds.*Be sure to compare before purchasing. Includes:4 x 7mm x 115mm...

Piaggio Vespa Ciao Citta Headset / Steering Stem Bearing Kit from Buzzetti

 Buzzetti Headset made for Piaggio Vespa Ciao Citta mopeds. You must check your specs before ordering as some vespa models have inverted cups. This is known to also fit some Honda Hobbit mopeds. It could even be used to mount different forks on...

NOS Moped Cylinder Stud m7 x 102mm *each*

M7 x 102mm Moped Cylinder stud.Sold each. Diameter: 7mm   M7 Part Length: 102mm  Thread Length on each end: 14.5mm & 22.5mm Please compare yours before ordering

Universal Exhaust Hardware Kit - (2) Studs + (2) Nuts

Stud and nut kit to install your Tomos, Puch or similar exhaust. This kit includes:(2) Nuts 12.5mm Long(2) Studs M6x 32mm Long Tall M6 x 12.5mm steel exhaust nuts. Can also be used on most intakes. 6mm engine studs fit almost all cylinders and kits...

NOS Tomos Moped M10 Allen Head Bolt - 026699

NOS original Tomos Allen head bolt. M10 x 1.5mm threading, 35mm Long. Made for the A55 Streetmate R. Will fit A35 LX, ST, Sprint. Tomos # 026699

NOS Minarelli V1 Moped Engine Stud M6 x 135mm *Each*

Original NOS Minarelli V1 cylinder stud. Sold per piece. M6 x 135mm with 16mm of threading on each side. 

NOS Tomos Moped A55 Cylinder Stud m7 x 115mm *each*

Original NOS Tomos Cylinder stud for A55 Engines.  Sold each. Diameter: 7mm   M7 Part Length: 115mm  Thread Length on each end: 15mm & 20mm Please compare yours before ordering Tomos # 205386

Tomos A55 Cylinder Stud M7 to M6 x 116mm *each*

Cylinder stud for A55 Engines or custom projects. One side is M7 thread, the other side is M6.   Sold each. Diameter: 7mm  one end / 6mm other end Part Length: 116mm  Please compare yours before ordering Replacement for...

NOS Sachs 504 Cylinder Stud M8 Threads 104mm Length *each*

Sachs cylinder stud for the 504 engine. The stud is 7mm, the threads are 8mm and it is a flat head screw driver top.    *Sold each*Please be sure to compare before purchasing Thread Diameter: 8mm Part Length: 104mm    

NOS Puch Cobra / Monza Cylinder Stud m7 + m8 threads, 138mm Length *each*

Puch cylinder stud for the Cobra and Monza models. The bottoms are M8 thread and the top is m7 threading.      *Sold each*Please be sure to compare before purchasing Thread Diameter: 7mm x 1mm and 8mm x 1.25mm Part...

Honda Hobbit / Universal Moped Cylinder Stud m6 x 120mm *each*

Cylinder stud for Honda Hobbit mopeds.  Sold each. Please compare yours before ordering. M6 Threads x 120mm Long *Use maximum 5ft lbs of torque*  

Brake Cable Knarp, 15mm x 8mm

Brake cable knarp /cable stop for many moped applications. 15mm long - 8mm OD Use a flat head screwdriver or 7mm socket

Motobecane Rubber Motor Mount Bushing - Upgraded

Rubber motor mount bushing for AV7 and AV10 powered Motobecane mopeds.  Better quality bushing than the SKU 1183. Bushing OD is 32mm Bushing ID is 8mm  Bushing liner width is 18mm  Made in France.   *You receive one.

Vespa Piaggio Cylinder Stud m7 x 120mm *each*

NOS Cylinder stud for Vespa, Piaggio, Kinetic mopeds.  Sold each.Please compare yours before orderingDimensions:M7 Threads120mm Long  

Motobecane Stock Rubber Motor Mount Bushing

Rubber motor mount bushing for AV7 and AV10 powered Motobecane mopeds. Best for stock power.   Bushing OD is 32mm Bushing ID is 8mm  Bushing liner width is 18mm   *You receive one.