Transmission

Kinetic TFR Magnum LEFT Pedal Crank Arm, 20mm - Chrome

New LEFT chrome pedal crank arm for Kinetic mopeds.  These are for the older TFR, Luna and Magnum models.   *Warning.... Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic mopeds. Though some newer...

SKF 6000 Non-Sealed C3 Bearing 26x10x8

High quality SKF non-sealed bearing.  Perfect for Tomos A35 and A55 clutch covers Please be sure to measure and compare bearing numbers before purchasing.26mm OD x 10(9.75)mm ID  x 8mm Width Tomos #  035031

Puch E50 One Speed Moped Clutch Bushing - 22 x 15 x 17

Puch one speed E50 Clutch bushing. Comes with two lubrication holes.Dimensions:14.9mm Inner Diameter17mm Outer Diameter21.4mm Longm**Please be sure to check specs and understand you may need to ream or sand to fit perfectly. Recommended...

Piaggio Vespa Ciao Single Speed Clutch Plate - Non Variated Models

Piaggio Vespa  Ciao moped singles speed clutch pack top plate. Made for non variate models only. Dimensions:64.9mm(2.5") Diameter6.7mm(.26) High8mm Diameter Hole

Vespa Starter Clutch Pad Segment Set - Variated Ciao, Bravo, Boxer, SI

Top quality Vespa Piaggio starter clutch segments set with springs. For variated Ciao, Bravo, Boxer, SI models only.  Made in Italy by Ferodo!

Universal Odyssey Grandstand PC Pedals, 9/16th" - Black *Pair*

Odyssey Grandstand PC Pedal Pair (Tom Dugan Signature) 9/16 inch Pedals from one of the best BMX companies in the game. Black plastic composite body with chromoly metal spindle.Unsealed Bearings.Tools needed: 17mm pedal wrench or 6mm each key.105mm...

Universal Odyssey Grandstand PC Pedals, 9/16th" - Clear *Pair*

Odyssey Grandstand PC Pedal Pair (Tom Dugan Signature) 9/16 inch Pedals from one of the best BMX companies in the game. Clear plastic composite body with chromoly metal spindle.Unsealed Bearings.Tools needed: 17mm pedal wrench or 6mm each key.105mm...

Classic Moped Pedal Set - No Reflectors

Classic style pedals with no reflectors for stealth riders.   Fits 99% of mopeds.   9/16th threads. Comes with left and right pedals.Dimensions:Tip to tip length - 135mmPedal thickness - 23mmPedal width - 72mm

NOS Puch Za50 Starter Clutch Adjuster - Nut Only

NOS starter clutch adjuster nut for Puch 2-speed ZA50 engines.*This is the adjuster nut only, as pictured. 

Motobecane Stock Variator / Clutch Assembly - Complete

Complete stock Motobecane 3 ball bearing variator assembly.Please be sure to check the unit before installation to be sure all hardware is secure. Comes as shown.

NOS A35 / A55 Tomos Clutch Hub - 1st Gear

Original Tomos 1st gear clutch hub. Used on A35 and A55 mopeds.    Tomos # 223429

Vespa Starter Clutch Pad Segment Set, Ciao / Citta - Non Variated

New non variated Vespa Piaggio Ciao / Citta starter clutch segment set with springs.    Made in Italy.

Original Tomos "Red" Clutch Spring - A55 2nd Gear

Original Tomos Clutch Spring for A55 Mopeds. The softer "red" Clutch spring.Second gear on A55.   Tomos # 223769

Original Tomos "Green" Clutch Spring - A35 & A55

Original Tomos Clutch Spring for A35 and A55 Mopeds. The stiffer "green" Clutch spring.First gear on A55.First and Second on A35 Survey says,,,, rated at 9.5lbs   Tomos # 209013

Motobecane Variator 3 Roller Cage / Guide - Roller Weights included

Variator cage 3 weight roller guide for stock variators. weights included. For Motobecane AV7 & AV10 mopeds.Specs : Roller weights - 8.5 - 8.6 gram, 15mm x 12mm diameter weights. Roller Cage - 13.60 grams, 23.5mm thickness, 85mm wide.

Motobecane Variator 3 Ball Roller Cage / Guide Balls included -MBK 51

Variator roller 3 bearing roller guide for stock variators. Balls includedSpecs : Bearings - 10 gram bearings, 13mm diameter bearings Roller Cage - 14.07 grams, 22mm thickness, 84mm wide, 14mm wide roller channel.

NOS Moped Starter Clutch Actuator Lever - Avanti / Garelli VIP

NOS Avanti starter clutch lever. Will work on Garelli VIP mopeds.    Dimensions: 75mm Long shaft 10mm Diameter shaft 6mm Shaft end piece Holds cable ends(knarps) from 3mm-10mm wide and up to 8mm in diameter.   

Kinetic TFR, Magnum Chrome Pedal Arm Set, 20mm

New old stock chrome pedal set for Kinetic mopeds.  These are for the older TFR, Luna and Magnum models.  Will also fit Avanti and Indian mopeds. *Warning. Fits ONLY models with 20mm pedal axle shafts which were on the majority of Kinetic...

Motobecane Moped Aluminum Pulley with 11 Tooth Gear

Polished aluminum  pulley for Motobecane and Mobylette mopeds.Comes with 11 tooth sprocket. Only Peugeot sprockets will fit this pulley if a replacement is needed. Fits 16mm Pedal shafts. Sprocket mounting OD = 28mmTotal diameter =...

Motobecane Stock Pulley with 11 Tooth Gear and Pedal Engagement Lever - Black

Motobecane pulley for Motobecane and Mobylette mopeds. Comes with 11 tooth sprocket and the pedal engagement lever. 

Pedal Conversion / Buddy Ride Foot Pegs - 16mm *Sold as a Pair

Remove your pedal arms for exhaust clearance or give your moped a motorcycle feel. Fits 16mm pedal shafts and is secured with Allen set screw.  Pretty much fits all mopeds beside the Kinetic.   *Sold as a pair  

Stock Vespa Piaggio Ciao Belt 9.5x950x960

Replacement belt for Vespa Piaggio Ciao mopeds. Made for stock 95mm rear pulley.Please compare before purchasing.  Dimensions: 9.5mm Wide x 950/960 mm Long     Piaggio Belt Fitment:    CIAO- 912mm ( 65mm & 70mm...

Chrome Pedal Arms Set - Peugeot / Motobecane Style, Fits Multiple Mopeds

Peugeot chrome pedal arms. Will fit Tomos, Motobecane and Vespa mopeds. Can be used on others as well. Please compare before purchasing.Has 9/16" pedal thread with 16mm pedal crank hole.Snug fit. Comes with left and right pedal arm as shown.150mm...

Motobecane Starter Clutch Pad Set W/ Springs - Variator only

Motobecane Flywheel clutch pad set Made for variated models only. Springs included. Quality pads made in Europe. Roughly 36mm long x 9mm wide   Asbestos Free

Vespa Piaggio Ciao 13mm x 950mm Ribbed Drive Belt for 80mm Pulley - Variated Only

Ventico 13mm x 950mm drive belt for Variated Vespa Piaggio Ciao mopeds. For use on 80mm Pulleys. 

Malossi Honda Hobbit Camino PA50 Performance Racing Gears

Honda Hobbit, Camino, PA50, racing gears made by Malossi.There is a 13/35 gear ratio Made in Italy.

1/8 Inch Bicycle Chain 112 Links - Black

1/8 x 1/2 inch bicycle chain.. Comes with 112 links and a master link.

NOS Tomos Foot Peg Support Bracket - A35 Mopeds

Original Tomos foot peg support bracket, made for the A35 mopeds. 59mm distance between mounting brackets. 220mm long post.  *May fit other A35 models. Research and compare.  Tomos # 227051

NOS Tomos Foot Peg Support Bracket - A3 Bullet

Original Tomos foot peg support bracket, made for the A3 Bullet moped (1977-1991) 59mm distance between mounting brackets. 220mm long post.  *May fit other A3 and A35 models. Research and compare.  Tomos # 211542

NOS Original Tomos Moped Kick Start Bushing A35 / A55, 223448

NOS original Tomos kick start distance bushing. Located behind the sprocket on your engine. Fits A55 and A35 mopeds.  28mm Long 18mm Outside Diameter 16mm Inside Diameter   Tomos # 223448

Original Tomos A35 / A55 Complete 1st Gear Clutch Assembly

OEM Tomos complete 1st gear clutch assembly.  Will fit A35 and A55 engine models. Tomos part # 227018 (A35) & 227849 (A55) Tech Tip:  Soak in ATF/ gear oil overnight before use Recommended accesories:  2nd Gear...

KMC 415 x 122 Link Drive Chain - Chrome

Top Quality KMC  drive chain for Tomos mopeds as well as others with the same type.  Comes with masterlink. Chain size varies depending on gearing, make and model.  Please check specifications and or count links before ordering. ...

NOS Tomos 24T Rear Sprocket A3 A35 A55 Mopeds

24T rear sprocket fits A35, A55 and some A3 mopeds. 42.5mm Inner diameter. Measure and compare. Color of sprocket may vary depending on stock. Aluminum or coated finish. Made for post 2002 Revival mopeds, but will fit many other Tomos wheels. Tomos #...

Tomos A35 / A55 Moped Countershaft 1st Gear

1st speed gear for Tomos A35 and A55 engines. **No center bushing.**  Tomos # 227194

Union Moped Pedal Set 9/16 " - Universal Fitment

Union brand Moped Pedals. High quality retro pedals like the one found on original Puch Magnums The real deal!  9/16th threads fit 99% of mopeds.     

Motobecane Non Variating Drive Belt - 14.5 x 8 x 772 LI

Motobecane toothed drive belt for Non variating Motobecane engines... 6024 14.5 X 8 X 772 LI belt.

Motobecane Toothed Drive Belt - 14 x 8 x 808 LP

Motobecane toothed drive belt. This belt has great grip. Fits all variated models like 50V.  6022  14 x 8 x 808 LP belt.

NOS Vespa / Piaggio style Pedal Set - With Logo

NOS, OG  Italian Piaggio/Vespa style pedals with reflectors and logo for Boxer, Bravo, Ciao, Citta, Grillo, Grande, SI  mopeds. 9/16th threads. Some Pedals have light corrosion on spindle. But will clean up with some WD40.  They are over...

NOS Chrome Pedal Arm Set - Fits Multiple Mopeds

Original chrome pedal arms. Will fit Tomos and Vespa mopeds. Can be used on several mopeds. Please compare before purchasing.Has 9/16" pedal thread with 16mm pedal crank hole.Snug fit. Comes with left and right pedal arm as shown.165mm Total...

18 Tooth Freewheel Sprocket for Mopeds and Single Speed Bicycles

18 tooth freewheel for many mopeds including Vespa Piaggio and Kinetic.French thread 34.7mm x 1mm Kinetic Replacement # 03039030 Please compare and measure yours before purchasing.