Tomos

Puch / Tomos 38mm Head Gasket

Puch 38mm head gasket for 50cc cylinder kits.  Will also work on Tomos

Airsal 44mm Piston Kit for Tomos A55 and Puch

Replacement Airsal piston kit for 44mm  Tomos A55 cylinder kits as well as Puch. Comes with everything shown. 44mm diameter. 12mm wrist pin.  Airsal Part # 06210444Dimensions:53mm overall height24mm Top to center of wrist pin

Bulb 6v 15/15 BA20D

The BA20D is bulb for headlight and taillights of many model mopeds and motorcycles .  Please compare yours before purchasing. 6v 15/15w

Taller Brass Intake / Exhaust Nut M6 x 18mm (SOLD EACH)

Brass Tall Exhaust Nut.Perfect for installing a performance exhaust, because they are taller and softer than steel nuts.    M6 x 18mm tall20mm Hex *SOLD EACH*  Buy 2!

6mm Small Paper Fuel Filter

Paper filters trap the finest particles.  Best to run a in line filter on all moped, scooters, motorcycles, atv's, quads, etc.  Catch debris from entering your carburetor and save yourself from a bad day.Height:55mmFuel...

Tomos A3/ A35 OEM Black Swingarm

Tomos original swingarm for A3 and A35 models with similar roundsih type. Tomos Part # 229786blk Recommended Accessories: Chain adjusters 280mm Shocks Side Kickstand    

Tomos OEM Speedometer Holder / Bracket

Tomos original speedometer holder bracket to hold it inside the headlight housing or dashboard. Roughly 59mm wide  center hole is 11mm in diameter Tomos Part # 222301

OMG Fuel Petcock 12mm x 1.00mm, Rear Flow with Bowl

Top quality OMG petcock with on / off / reserve (new versions have the position stamped on dial)  for 5mm fuel line 12mm x 1mm female thread coupler nut.  Also has clear sediment bowl and filter for extra protection and convenience. *The...

Exhaust Gasket & Hardware Kit for Tomos and Puch

  Everything you need to install your Tomos, Puch or similar exhaust, easily and correctly.   This kit includes:  2x Nuts  2x Studs  1x Gasket   Tall M6 x 10mm bass exhaust nuts are perfect for performance upgrades...

Tomos A35 Alukit 70cc Piston Kit - 44mm

Replacement piston kit for 44mm Aluki, Airsal , DMP and similar Tomos A35 44mm 70cc cylinder kits. Comes with everything shown. 44mm diameter. 12mm wrist pin.  Replacement Rings

Extra Tall Brass Exhaust Nut M6 x 25mm (SOLD EACH)

Style: Extra Tall Brass  Exhaust Nut   Size: M6 threads x 25mm long   Description:Perfect for installing a performance exhaust, because they are taller and give you room to tighten with larger headers.      *SOlD...

DMP Tomos A35 50cc Aluminum Cylinder Kit, 38mm

Replace your worn out or damaged stock cast iron cylinder with this high tech light aluminum type.   Nikasil coated for best performance, reliability and long wear.  This kit is for all Tomos mopeds with the A35 engine. This does not work...

Tomos Chrome Side Kickstand For Round Swingarms - 9"

Sometimes a performance pipe forces you to do something else for a kickstand. Here is the solution. A high quality side kickstand. Black, and easy to install. All mounting hardware included. This kickstand is intended for bikes with tube style swing arms...

OMG 12mm x 1mm Right Flow Fuel Petcock - Round Knob

Top quality OMG right flow petcock for many mopeds, same 12mm thread as Sachs Hercules, Columbia Commuter,  Tomos Revival,  Streetmate,Targa, Targa LX, Sprint, Flexer, Arrow, Honda hobbit, camino, PA50, PA50II, vespa bravo, puch swinger,...

Complete Cylinder Stud Set, Tomos A3, A35 Mopeds M7 x 105mm

Tomos A3, A35 cylinder stud set Includes: 4 x 7mm x 105mm Cylinder Studs 4 x 7mm Washers 4 x 7mm Nuts  

Universal Moped Foot Pegs -16mm

Quality made foot pegs.  Remove your pedal arms for exhaust clearance or give your ped a motorcycle feel.Fits 16mm opening of pedal crank and is secured with Allen set screw.  Pretty much fits all mopeds beside the 20mm crank Kinetics.Buzzetti...

M Handlebar *Black* for mopeds and small motorcycles

Classic M shape for the cafe racer sporty look.  The handlebars are flat, but can be angled in the mount to adjust for drop / pullback.  Moped sized, but works well with smaller motorcycles like the MB5, RD50, CB50 and similar. 7/8" 22" end...

Tomos OEM Rear Brake Cable, Tomos A3 and A35 Mopeds

Replacement rear brake cable for Tomos A3 and A35  mopeds.  For '96-'02 targa, targa LX and sprint, '98-'99 TT classic, '03-'06 sprint and LX 56" cable housing62" cableTomos part number - 229908  

320mm MKX Chrome Moped Shock Set

Replacement pair of 320mm Black on Chrome adjustable shocks for many mopeds and small motorcycles. Measure from eye to eye and compare. Some mopeds you can go a little longer for more travel and clearance.  Stiffen or loosen up your rear end...

Tomos A55 Speed Package Airsal 70cc Cylinder Kit & Biturbo Exhaust for Streetmate, Revival & Arrow

Tomos A55 70cc Airsal Speed Package This kit  comes with dished style front sprocket is for  Tomos mopeds with the A55 engine,  Streetmate, Streetmate R, Revival, Arrow and similar European models Everything you need to increase top...

Universal Exhaust, Black with Gold Silencer, 28mm

Great universal exhaust to boost performance on odd ball mopeds that don't haver performance exhausts available.Clamp it on with a 28mm headers that are available for Puch, Tomos and Sachs.  Or weld it onto your old headerPeople have used them on...

320mm MKX Black Moped Shocks

Replacement pair of 320mm Black on Chrome adjustable shocks for many mopeds and small motorcycles. Measure from eye to eye and compare. Some mopeds you can go a little longer for more travel and clearance.  Stiffen or loosen up your rear end...

Sava B4 2.25" x 17" Moped Tire

Great repalcement tire for many moped models and many others mopeds with 17" wheels.  Puch Maxi, Newport, Magnum, Pinto, Murray, Motobecane, Hobbit, PA50, Camino and many others. Tube Type DOT approvedSpeed rated (60 mph) Recommended...

OMG 12mm x 1.00mm Right Flow Fuel Petcock

Top quality OMG Right Flow petcock for many mopeds, same 12mm thread as Sachs Hercules, Canadian Moppet(Stepthru late 70s), Columbia Commuter,  Tomos Revival,  Streetmate,Targa, Targa LX, Sprint, Flexer, Arrow, Honda hobbit, camino, PA50,...

Tomos A3 A35 Tecno Boss Exhaust, Black

Black finish Tecno Boss exhaust for the Tomos mopeds with the A3 and A35 engine.  Will not fit the Revival or Streetmate. 28mm Internal diameter header allows for a higher top speed.    Expect 5-10 mph gain over stock.   Re-gear for...

K-Star Puch / Tomos 50cc 38mm High Comp Cylinder Head

This 38mm, 50cc high compression cylinder head works with all ZA50 and E50 engines found on various Puch engine mopeds like the maxi, magnum, swinger, pinto, freespirit and many others.  Also works on all Tomos A3, A35 and A55 Engines. Tech...

Puch / Tomos 50cc 38mm High Comp. Cylinder Head

This 38mm, 50cc high compression cylinder head works with all ZA50 and E50 engines found on various Puch engine mopeds like the maxi, magnum, swinger, pinto, freespirit and many others.  Also works on all Tomos A3, A35 and A55 Engines. Tech...

OMG 16mm x 1.00 Bottom Flow Fuel Petcock

OMG top quality petcock for Puch magnum, Foxi GT, Sears Allstate, and any other moped or motorcycle with 16mm x 1mm threading For use this on many different vintage motorcycles like guzzi, betamotor, ducati, fantic motor, benelli, aprillia, simpson,...

OMG 12mm x 1.00mm Left Flow Fuel Petcock

Top quality OMG left flow petcock for many mopeds, same 12mm thread as Tomos Revival,  Streetmate,Targa, Targa LX, Sprint, Flexer, Arrow, Honda hobbit, camino, PA50, PA50II, vespa bravo, puch swinger, puch freespirit, puch pinto, batavus hs50...

Dellorto SHA 14-16mm Carburetor Air Filter Cover Clip 6235

Air filter cover clip  for the Dellorto SHA  14.12, 14.14,  15.15 and 16.16 and similar. Also works with clone carbuetors.   Dellorto # 6235  

Dellorto SHA 14-16mm Carburetor Air Filter 6117

Air filter  for the Dellorto SHA  14.12, 14.14,  15.15 and 16.16 and similar. Also works with clone carburetors.   Dellorto # 6117  

Dellorto SHA 14-16mm Carburetor Air Filter Cover 6183

Air filter cover for the Dellorto SHA  14.12, 14.14,  15.15 and 16.16 and similar. Also works with clone carbuetors.   Dellorto # 6183  

Dellorto SHA 14-16mm Carburetor Rebuild Kit, Tomos

Complete gasket rebuild kit for SHA carburetors  14.12, 14.14,  15.15 and 16.16 and similar. Also works with clone carbuetors.   Dellorto # 52533   Suitable replacement for Tomos Part # 219875 

300mm MKX Chrome Moped Shocks

Replacement pair of 300mm Black on Chrome adjustable shocks for many mopeds and small motorcycles. Measure from eye to eye and compare. Some mopeds you can go a little longer for more travel and clearance.  Stiffen or loosen up your rear end...

Tomos A3 / A35 Homoet Exhaust

Hand made dutch quality Tomos A3 / A35 exhaust by Homoet.    Great midrange and topend pipe.  If you are looking for the best performance exhaust for your Tomos, this is the pipe you need. Fits A3 and A35 engine LX, Targa LX, ST, Bullet,...

Inner Cable with Big End Fitting

Universal 2mm inner  cable that can be used on many different mopeds with similar cable end or with use with a knarp. Also works for Puch E50 cltuch cable 69" long.  Cut to desired length.  Long enough for the Rear and Front applications...

1.5mm Base Gasket / Spacer, Puch and Tomos

1.5mm thick. stock style base gasket for many Puch and Tomos mopeds top quality material. Extra thick to help with piston clearance issues and to adjust timing. Fits Tomos A3, A35, Puch E50, ZA50, Maxi, Magnum ,Pinto, Swinger, Free Spirit, Bombardier...

NOS CEV Switch Cover for Domino Controls

For Domino throttle 1271.03 and others.  Found on many mopeds and  Italian motorycyles. Garelli, Benelli, Commando, Fantic.  

CEV Style Condenser 7365 No Wire

FOR 6949, 6923 STATOR, 13373 PLATE 18MM X 25MM   **Not CEV brandReplaces CEV #  7365 garelli tomos minarelli morini FOXI KTM MORINI M01 Cev and Ducati ignitions.

CEV / EFFE Points with No Wire, Tomos A3, Morini and Minarelli

CEV/EFFE points for CEV ignitions found on some Tomos A3, Minarelli and Morini mopeds.  Please compare before yours buying.   *DOES NOT FIT THE TOMOS A35 Works with CEV 6420 Stator Ignition System and possibly the 6876.  As well as the...